Surveying and mapping of mechanical parts
Project introduction
Customer products
This product is a mechanical part, and the processing structure is complex, so the size and relative position requirements are high. Therefore, the accessory needs to scan the data of the first industrial part in 3D, detect the quality error between the data and the design document, and analyze the mapping cost of mechanical parts to ensure the smooth progress of production.
Customer difficulties
After the customer's castings are processed, how to detect them has become a difficult problem. The customer has no way to detect the complex structure, many internal dimensions, important processing positions and relative positions.
Nanjing Ningrui handheld 3D laser scanner
The customer recognizes that the measuring equipment
The customer learned about our hand-held 3D laser scanner of Nanjing Ningrui metrology through the introduction of a friend, and checked the relevant knowledge on the Internet. He thought it was too suitable for the mapping of mechanical parts they wanted, so he found us.
Introduction to 3D laser scanner
When the portable 3D scanner T-scan works, the six beam laser is used to obtain the three-dimensional point cloud on the object surface. The operator can hold the equipment in his hand and adjust the distance and angle between the instrument and the measured object in real time. The operation is flexible, convenient and easy to learn. When scanning large volume objects, it can cooperate with the global photogrammetry system to eliminate the cumulative error and scan the size, shape and working environment of the scanned objects efficiently and accurately.
Operation of handheld 3D laser scanner and photogrammetry on products
Solution
The hand-held three-dimensional scanner is a mechanical mapping equipment. Firstly, the positioning mark points should be quickly pasted on the scanned products, and then the three-dimensional data of workpiece surface shape can be obtained quickly and accurately by using the mark points pasted on the workpiece surface through non-contact three-dimensional laser scanning; After the scanner obtains the high-precision data, the obtained data is compared with the existing digital analog, so as to obtain the product deviation and carry out cost analysis.
Scanning process
  It takes 7 minutes to paste the marked points;
  Data post-processing and comparison for 45 minutes.
Process display
3. Data comparison
summary
The grooved parts of the rotor body in the machine conform to the fit of the rotor gear and change the old comparison method. The use of 3D laser scanner is not only convenient and fast, but also can more accurately grasp the accuracy of each position, which brings better service to customers.
Reverse / comparative product presentation LW

Seven diverse wood products application reflect the diverse capabilities of CNC machining centers.
For a machine that not so long ago did not even exist, the uses for CNC machining centers have quickly become vast and continue to grow.
Woodworkers today are using these versatile machines for a variety of uses ranging from high-speed, flat-panel production work to very intricate carvings. Combining high speed boring with routing, profiling, cutting and other features, these computer-controlled marvels are being successfully utilized in shops that produce everything from beautiful high-end architectural woodwork to flanges for take up reels.
In the following pages, WOOD & WOOD PRODUCTS interviews woodworkers from around the country who have increased their productivity and accuracy while reducing labor costs through investments in CNC technology. Following are their stories.
SPEAKER MAKER USES CNC MACHINERY TO MAKE IT'S DIVERSE PRODUCT As an OEM supplier of audio speakers, the products that Tiffin, Ohio-based Ameriwood Industries International Inc. manufactures vary in size from small bookshelf-size speakers to large symphonic speakers.
Jim Harrington, plant manager of Ameriwood, said, "We do a variety of sizes and styles. We work with different types of materials, with different thicknesses and locations of holes. No two things are alike." Because of this product diversity, Ameriwood Industries (formerly Tiffin Enterprises) used to perform multiple machining operations for every item. Multiple operations meant that several workers had to handle each part, "and the more you handle it, the more opportunity there is for the product to be damaged," Harrington said.
To minimize parts handling -- and thus reduce their labor costs -- the company made an investment in a CNC machining center from Roger Stiles & Associates.
MACHINING CENTERS Vinyl overlayed particleboard is trimmed, cut-to-size, drilled and routed on the machining center. Computer programs are downloaded from a computer system directly into the machine's controller.
"We used CNC routers for a number of years," Harrington said. "The machining center is taking the place of routing and vertical-type drills." The machining center allows the company to do up to 12 workpieces at a time, Harrington said. After all the machining operations have been completed it is a "totally finished part" without need of further machining, Harrington added.
EFFICIENT PLANT HELPS COMPANY CONTROL COSTS In the past two years, Warvel Products-North Carolina has experienced dramatic price increases for the raw materials used to produce curved plywood components. These components are then sold to contract furniture manufacturers such as Haworth.
"We had 30 percent increases in our raw material costs," said sales manager Robbie Wiltcher, "so we have improved plant efficiency by purchasing machinery and technology that would allow us to absorb as much (of the price increase) as possible without passing these costs on. It is important for us as a vendor to help our customers be as competitive in their markets as possible." One of the ways Warvel did this was through the purchase of a multiple-station, four-axis CNC machining center from C.M.S North America. The machining center allows the company to mount up to six components at a time, and complements the company's existing three and five axis machining centers, Wiltcher said.
This is important, considering the amount of product which is shipped from the company's plant in Linwood, N.C. Approximately 100,000 parts a month are produced at the facility, the majority of which are customized. The company has a catalog with standard components, but Wiltcher said that 80 percent of the company's orders are made per customers specifications.
"The machine is capable of multiple machining tasks," Wiltcher said. "In most cases all that's left to do is light sanding and tee-nut installation where required." Another benefit, Wiltcher added, is the very tight tolerances obtained with the machine. The company supplies curved plywood which must integrate with plastic and steel components in ergonomic chairs.
"It is essential to be able to maintain tight tolerances in the various required operations such as drilling on angles, profiling and notching so that all of the different chair components fit together the way they were engineered. This machine provides all of these things," Wiltcher said.
To increase productivity even further, the company purchased machines and software that complement the machining center, including a digitizing machine. The digitizer will read a template part and the software will create a program which is downloaded into the machining center. The company also uses the system to internally produce its own compound tooling.
"The system has reduced the lead time on new tooling from months to days," said Wiltcher. "All of these capabilities assists our customers in bringing many new products to market rapidly and competitively." HIGH-TECH HELPS HIGH-END ARCHITECTURAL FIRM Powell Cabinet & Fixtures of Sparks, Nev., is a high-end architectural woodworking company whose work ranges from luxurious residences to glistening casinos.
The 42-year-old company, which bills itself as the oldest architectural woodworking company in the state of Nevada, is owned by the father/son team of Roger and Bill Powell.
One of the company's most recent projects was for the new Luxor Casino and Hotel in Las Vegas. The company did a variety of work at the hotel, including a 3 1/2-inch thick, 13-inch wide, solid-mahogany handrail that was built on a 255-foot radius. The handrail also featured solid-cast bronze support pieces and etched glass.
The handrail was manufactured utilizing a Komo VR 512 CNC machining center the company got in January 1993. Prior to that, the company had been doing everything with multiple machines. "The machining center is exceptional on irregular shapes and curves," Bill Powell said.
"It is more adaptable than to have a journeyman do it by hand. The radius work takes more time to program, but instead of having a journeyman woodworker spend several days on something, the machine will produce the same product in significantly less time." Powell added that there is a learning curve to the machine. "The purchase of the machine is just the first step," Powell said.
"The time that it takes to learn how to program and operate it is a major expense, as is the tooling and all the programming updates that are needed to keep up-to-speed." But while these factors need to be taken into account, Powell said he thinks it is becoming essential for companies to invest in high-technology equipment. According to Powell, one of the reasons the company purchased the machining center was because "the quantity of qualified, journeyman cabinetmakers that can produce this type of work is diminishing. You have to rely on the technical aspects of the industry to help fill that void," he said.
COMPANY GROWS A STEP AT A TIME When Denny Beuter and Bob Bloss formed Diamond Cut Inc. eight years ago they had a plan. The two men wanted their South Bend, Ind.-based company to become a leader in the field of commercial sound equipment. A daunting task made all the more difficult considering they did not own any sophisticated equipment.
"We went on the premise that we needed extremely good equipment to make a really good product," said Beuter. "But in order to get good equipment you have to have a product with enough volume to keep the machine running." What Beuter and Bloss did was to start slowly, acquiring equipment and producing parts for other companies. "We would do cutting and edging, anything to get work into the plant," Beuter said. "To sell machine time you have to do everything a little bit better than what the (source) companies can do in their own shop. We got real good, real fast, because otherwise we had to eat the cost of the job." From doing this job-shop-type-work, the next step was doing contract work. "My partner (Bloss), whose background is in the speaker business, went out (to speaker companies) and said, 'We can make speakers boxes for you and we can do them with high precision,'" Beuter said.
Diamond Cut began producing speaker cabinets for such companies as JBL and Panasonic. The product Panasonic wanted the company to produce necessitated an equipment upgrade. "The Panasonic people wanted a (speaker) box that was trapezoid shape," Beuter said. "This product would have been almost impossible to make with the router we were using." Beuter and Bloss chose a U-26 Morbidelli machining center from Tekna Machinery. The machine not only allows them to produce the trapezoidal shapes, it also has reduced labor costs. "For example, we had one full-time worker on the payroll whose only job was to make jigs, Beuter said. "I have no more jigs." While Diamond Cut has grown, with sales projected to reach around $2 million in 1994, the company continues to move toward that plan. In 1993, the company started a proprietary line of heavy-duty commercial sound equipment under the moniker, Bull Frog.
The Bull Frog equipment is sold throughout the United States and a number of countries around the world. "For 24-hours a day, for the last three months, we have been so busy with our own proprietary work that we have not been able to do any outside work, Beuter said.
"Hopefully by the end of the year we will be completely out of contract work." BOOTH MAKER FINDS SIGN TO SUCCESS Utilizing a variety of materials, Farmington Displays of Farmington, Conn., creates trade show displays for companies in industries as diverse as food, computers and guns.
Farmington Displays, which was founded in 1973 by Paul DiTommaso Sr., counts 278 companies as its clients. On average, Farmington Displays' clients update their booths every three to five years.
"We have a pretty good job flow," said general manager Sal DiTommaso, son of Paul Sr. and one of three sons and a daughter currently working for the company. "Not everybody is building their booth at the same time." Farmington Displays boasts an impressive client list, including General Electric, NEC and gun manufacturer Smith & Wesson. In the traditionally very labor-intensive field of display manufacturing, the company stands out for its use of high-technology equipment. More than three years ago, after extensive research on available machinery, the company began its investment in CNC machinery.
"The first thing that sparked my interest in obtaining CNC machinery was watching one of my men cutting out an eight-foot circle," said Sal DiTommaso. "It was so archaic, I just said there had to be another way to do it." Farmington Display's plant now features two Heian CNC routers and a computerized panel saw from Stiles Machinery, as well as a computerized graphic/design laboratories linked together as a Local Area Network.
The Heian machining centers have allowed the company to branch out into areas such as manufacturing signage and store fixtures. Farmington Displays had always created graphics for signs, but the CNC routers allow the company to manufacture them in-house. Additionally, the company is now doing contract machining for other, non-competing manufacturers.
To create their distinctive products, the company utilizes a variety of materials. On its CNC routers, the company utilizes everything from acrylics to solid woods. On a separate metal machining center the company works with brass and other metallic alloys. "We don't farm anything out," DiTommaso said. "We try to keep everything in-house so that we have complete quality control over the finished product." FAMILY-OWNED LUMBER YARD SEIZES CHANCE TO DIVERSIFY ITS BUSINESS In 1922, Hans Lars founded Hansen Lumber in Galesburg, Ill. Over the next 70 or so years, the business would be handed down from family-member to family-member, and would remain a traditional lumber yard.
It remained solely a lumber yard until two years ago when Hansen Lumber seized an opportunity to diversify. The company was asked to do some circular panel cutting for a Galesburg-based manufacturer of wooden reels. Approximately a year later that manufacturer, who believed the reel industry was going to dominated by the use of plastics, first contemplated shuttering the facility and then offered to sell the business -- and its client list -- to Hansen Lumber.
The family-owned company, currently being run by Shard Hansen, the founder's grandson, with help from his daughter Karen (the fourth-generation family member in the business), decided to purchase the company, and quickly realized the need to upgrade its equipment.
"Taking up wire or rope around a reel must be done at very high feed rates, especially if it is a small diameter wire, because unless your doing it at a 1,000 feel a minute it would take forever to wind," said Hansen, "so the arbor hole has to be exact. If the arbor hole is off center the whole thing will be jerking." A little more than a year ago the company purchased a CNC machining center from Accu-Router. The machine features two vertical routers, which can machine 1 1/2 inch southern yellow pine industrial grade plywood used for the flanges on the reels and maintains tight tolerances.
Prior to working with the machining center, the company would have to cut out a square and in subsequent steps radius the panel down to the required size and shape.
Having a high-technology machining center not only provides for accuracy, it also helps to utilize the plywood. "Our flanges range in size from eight inches to 48 inches round," said Hansen.
"When we are cutting the circles, we can nest them in such a fashion that we get great yield and waste is very nominal." CNC EQUIPMENT HELPS CARVING COMPANY MAKE BEAUTIFUL MUSIC Investing, not only in new equipment, but also in the training of its workforce has helped this Thomasville, N.C.-based carving company increase its capacity while reducing its overhead.
Founded in 1968, Piedmont Carving carves furniture parts -- specializing in chair parts -- and parts for such musical instruments as the cello and guitar.
Over the last few years, the company has sold some of its older carving machines and invested that money in computerized machinery including CNC Robot Carvers from Thermwood Corp.
"We used to have 13 carving machines and we would run all of them in one shift," said Gay Jones, who along with her twin brother Ray, and her father, company-founder Jimmy, own the business. "We sold three carving machines and still are projecting to triple our capacity with the robotic carvers." The company has reduced its labor costs in part by computerizing its carving, but also by cross training its 29 employees so that they can work on other machines in the shop.
Learning to efficiently use the CNC robot was a difficult challenge for the company, Gay Jones said, "but I'm glad we did because it gives us an advantage over companies who are just now getting into robotic carving." Piedmont Carving bought its first robotic carver four years ago. The company is planning to purchase additional machines.
One of the benefits of computerized machinery is consistency. This is important when Piedmont is crafting its furniture and musical instrument components.
"Chair parts have to fit together perfectly when they're sent to the manufacturer," Jones said. "With the robotic carving everything stays so consistent. This consistency is also very important when we are doing the musical instruments because the craftsmanship that goes into the part can affect the sound." CARVING WOOD PARTS 20 AT A TIME Intricate handcarvings are being quickly and accurately duplicated by Carving Research Inc. of Huntersville, N.C., using a 20-head Kitako CNC Machining Center distributed by Tekmatex Inc.
Carving Research is a 2-year-old, 12-employee company with projected 1994 sales of $840,000. The company supplies intricate wood carvings to such major residential furniture makers as Henredon Furniture Industries Inc. and Baker Furniture Co.
What once had to be done one at a time by master handcarvers can now be done 20 at a time by the company. This results not only in time savings but cost savings as well, without sacrificing the look of the product, according to company owner Tom Bowker. An example of the speed of the machine is a rice carved bed post; typically it would take a master handcarver approximately six to eight hours to complete, "while we can do it in an hour," Bowker said.
To produce the carvings, an initial handcarved template is made. This carving is sent to Tekmatex, where a digitizing machine creates a computer program which can be downloaded into the machining center. Once this program is completed, an infinite number of a given carving can be created with precision.
There are certain "essential ingredients" to creating the carvings, said Bowker. Tooling is one of the most important. Because of the nature of the product, the Carving Research utilizes unique tooling, including a razor-sharp veining bit developed by Oertli Woodworking Tools Inc. that leaves such a clean cut, that secondary carvings are not necessary, Bowker said. Another example is a 1/16-inch flat-bottom or straight router bit which is used on many of the carvings.
"Nobody else uses anything like that," Bowker said.
"Because of the intricacies of many of the carvings, we have to use a wider variety of tooling including some carbide tooling, than what you would use if running a normal carving operation. Many of our bits have to be small because you have to get in and do a cut and make it look like it was done with a chisel.