Guide to Shop Nylon Parts in HONSCN
Honscn Co.,Ltd delivers nylon parts which integrates both functionality and visually. We ensure that the design of the product is performed by professional experts in product design. They negotiate with the customers to study their specific requirements of specifications. With the help of advanced graphing software, the design displays the model realistically and completely.
HONSCN products have received many favorable comments since launched. Thanks to their high performance and competitive price, they sell well in the market and attract a larger customer base across the world. And most of our targeted customers repurchase from us because they have achieved sales growth and more benefits, and larger market influence as well.
Here at Honscn, most products as well as nylon parts can be customized to the unique needs of each customer. Through all these, we are committed to adding enormous amounts of value to our customers.
Now many industries of precision parts will use CNC machining production, but after CNC machining is completed, many products surface is still relatively rough, this time you need to carry out secondary surface finishing treatment.
First of all, surface treatment is not suitable for all CNC processing products, some products can be directly used after processing, and some need to be hand-polished, electroplating, oxidation, radium carving, screen printing, powder spraying and other special processes. Here are some things you should know about surface treatment.
1, improve product accuracy; After the product processing is completed, some products have a rough surface and leave a large residual stress, which will reduce the accuracy of the product and affect the precision of the match between the parts. In this case, the product surface treatment is required.
2, provide product wear resistance; If the parts usually use scenarios are interacting with other parts, long-term use will increase part wear, which also requires processing of the product surface to extend the service life of the parts.
3, improve the corrosion resistance of the product; Parts used for a long time in highly corrosive places require special surface treatment, requiring polishing and spraying of anti-corrosion materials. Improve corrosion resistance and service life of the product.
The above three points are the prerequisites for surface processing after CNC precision parts processing, and several surface treatment methods will be introduced below.
What is electroplating? What are the types and applications of electroplating?
01. What is electroplating?
Electroplating refers to the surface engineering technology of obtaining a solid metal film on the surface of the substrate by electrolysis in a salt solution containing the metallized group, with the metallized group as the cathode and the metallized group or other inert conductor as the anode under the action of direct current.
02. Why electroplate?
The purpose of electroplating is to improve the appearance of the material, while giving the surface of the material a variety of physical and chemical properties, such as corrosion resistance, decorative, wear resistance, brazing and electrical, magnetic, optical properties.
03. What are the types and applications of electroplating?
1, galvanized
The galvanized layer is of high purity and is an anodic coating. The zinc layer plays a mechanical and electrochemical protective role on the steel matrix.
Therefore, galvanized layer is widely used in machinery, hardware, electronics, instruments, light industry and other aspects, is one of the most widely used plating species.
2. Copper plating
The copper coating is a cathode polar coating, which can only play a mechanical protection role on the base metal. The copper plating layer is usually not used as a protective decorative coating alone, but as the bottom or middle layer of the coating to improve the adhesion between the surface coating and the base metal.
In the field of electronics, such as through hole copper plating on printed circuit boards, as well as hardware technology, crafts, furniture decoration and other fields.
3. Nickel plating
Nickel plating layer is a negative polarity protective layer, which only has a mechanical protection effect on the base metal. In addition to the direct use of some medical devices and battery shells, the nickel-plated layer is often used as the bottom or middle interval layer, which is widely used in daily hardware, light industry, home appliances, machinery and other industries.
4. Chrome plating
The chromium-plated layer is a negative polarity coating, which only plays a mechanical protection role. Decorative chrome plating, the bottom layer is generally polished or electrodeposited bright coating.
Widely used in instruments, meters, daily hardware, household appliances, aircraft, automobiles, motorcycles, bicycles and other exposed parts. Functional chrome plating includes hard chrome plating, porous chrome, black chrome, opal chrome and so on.
Hard chrome layer is mainly used for various measuring calipers, gauges, cutting tools and various types of shaft, loose hole chrome layer is mainly used for cylinder cavity piston failure; The black chrome layer is used for parts that need a dull surface and wear resistance, such as aviation instruments, optical instruments, photographic equipment, etc. Opalescent chromium is mainly used in various measuring tools.
5. Tin plating
Compared to the steel substrate, tin is a negative polar coating, while compared to the copper substrate, it is an anode coating. The tinning layer is mainly used as the protective layer of thin plate in the can industry, and most of the malleable iron skin is made of iron plate tinning. Another major use of tin coatings is in the electronics and power industries.
6, alloy plating
In a solution, two or more metal ions are co-precipitated on the cathode to form a uniform fine coating process called alloy plating.
Alloy electroplating is superior to single metal electroplating in crystal density, porosity, color, hardness, corrosion resistance, wear resistance, magnetic conductivity, wear resistance and high temperature resistance.
There are more than 240 kinds of electroplating alloys, but less than 40 kinds are actually used in production. It is generally divided into three categories: protective alloy coating, decorative alloy coating and functional alloy coating.
Widely used in aviation, aerospace, navigation, automobile, mining, military, instruments, meters, visual hardware, tableware, Musical Instruments and other industries.
In addition to the above, there are other chemical plating, composite plating, non-metal plating, gold plating, silver plating and so on.
What is polishing?
The surface of the items processed by CNC machining or 3D printing is sometimes rough, and the surface requirements of the products are high, so they need to be polished.
Polishing refers to the use of mechanical, chemical or electrochemical action to reduce the surface roughness of the workpiece in order to obtain a bright, flat surface processing method.
Polishing can not improve the dimensional accuracy or geometric accuracy of the workpiece, but for the purpose of obtaining a smooth surface or mirror gloss, and sometimes to eliminate gloss (extinction).
Several common polishing methods are described below:
01. Mechanical polishing
Mechanical polishing is by cutting, plastic deformation of the surface of the material to remove the polished convex and smooth surface polishing method, the general use of whetstone strip, wool wheel, sandpaper, etc., mainly manual operation, surface quality requirements can be used to super-fine polishing method.
Super finishing polishing is the use of special grinding tools, in the polishing liquid containing abrasive, tightly pressed on the workpiece to be machined surface, for high-speed rotation. This method is often used in optical lens molds.
02. Chemical polishing
Chemical polishing is to dissolve the microscopic protruding part of the surface of the material in the chemical medium preferentially than the concave part, so as to obtain a smooth surface.
The main advantage of this method is that it does not require complex equipment, can polish the workpiece with complex shape, and can polish many workpieces at the same time, with high efficiency.
The core problem of chemical polishing is the preparation of polishing liquid.
03. Electrolytic polishing
The basic principle of electrolytic polishing is the same as that of chemical polishing, that is, the surface is smooth by selectively dissolving small protruding parts on the surface of the material.
Compared with chemical polishing, the effect of cathode reaction can be eliminated and the effect is better.
04. Ultrasonic polishing
The workpiece is put into the abrasive suspension and placed together in the ultrasonic field, and the abrasive is ground and polished on the workpiece surface by relying on the oscillation of the ultrasonic wave.
Ultrasonic processing macroscopic force is small, will not cause workpiece deformation, but tooling production and installation is more difficult.
05. Fluid polishing
Fluid polishing relies on high-speed flowing liquid and the abrasive particles it carries to wash the surface of the workpiece to achieve the purpose of polishing.
Common methods are: abrasive jet processing, liquid jet processing, hydrodynamic grinding and so on. Hydrodynamic grinding is driven by hydraulic pressure to make the liquid medium carrying abrasive particles flow through the surface of the workpiece at high speed.
The medium is mainly made of special compounds with good flow under low pressure and mixed with abrasives, which can be silicon carbide powder.
06. Magnetic grinding polishing
Magnetic grinding and polishing is the use of magnetic abrasive under the action of magnetic field to form an abrasive brush, grinding the workpiece.
This method has the advantages of high processing efficiency, good quality, easy control of processing conditions and good working conditions.
The above are 6 common polishing processe.
HONSCN Precision has been a professional CNC machining manufacturer for 20 years. Cooperation with more than 1,000 enterprises, deep technology accumulation, senior technician team, welcome to consult customized processing!Customer service
First of all, surface treatment is not suitable for all CNC processing products, some products can be directly used after processing, and some need to be hand-polished, electroplating, oxidation, radium carving, screen printing, powder spraying and other special processes. Here are some things you should know about surface treatment.
1, improve product accuracy; After the product processing is completed, some products have a rough surface and leave a large residual stress, which will reduce the accuracy of the product and affect the precision of the match between the parts. In this case, the product surface treatment is required.
2, provide product wear resistance; If the parts usually use scenarios are interacting with other parts, long-term use will increase part wear, which also requires processing of the product surface to extend the service life of the parts.
3, improve the corrosion resistance of the product; Parts used for a long time in highly corrosive places require special surface treatment, requiring polishing and spraying of anti-corrosion materials. Improve corrosion resistance and service life of the product.
The above three points are the prerequisites for surface processing after CNC precision parts processing, and several surface treatment methods will be introduced below.
What is electroplating? What are the types and applications of electroplating?
01. What is electroplating?
Electroplating refers to the surface engineering technology of obtaining a solid metal film on the surface of the substrate by electrolysis in a salt solution containing the metallized group, with the metallized group as the cathode and the metallized group or other inert conductor as the anode under the action of direct current.
02. Why electroplate?
The purpose of electroplating is to improve the appearance of the material, while giving the surface of the material a variety of physical and chemical properties, such as corrosion resistance, decorative, wear resistance, brazing and electrical, magnetic, optical properties.
03. What are the types and applications of electroplating?
1, galvanized
The galvanized layer is of high purity and is an anodic coating. The zinc layer plays a mechanical and electrochemical protective role on the steel matrix.
Therefore, galvanized layer is widely used in machinery, hardware, electronics, instruments, light industry and other aspects, is one of the most widely used plating species.
2. Copper plating
The copper coating is a cathode polar coating, which can only play a mechanical protection role on the base metal. The copper plating layer is usually not used as a protective decorative coating alone, but as the bottom or middle layer of the coating to improve the adhesion between the surface coating and the base metal.
In the field of electronics, such as through hole copper plating on printed circuit boards, as well as hardware technology, crafts, furniture decoration and other fields.
3. Nickel plating
Nickel plating layer is a negative polarity protective layer, which only has a mechanical protection effect on the base metal. In addition to the direct use of some medical devices and battery shells, the nickel-plated layer is often used as the bottom or middle interval layer, which is widely used in daily hardware, light industry, home appliances, machinery and other industries.
4. Chrome plating
The chromium-plated layer is a negative polarity coating, which only plays a mechanical protection role. Decorative chrome plating, the bottom layer is generally polished or electrodeposited bright coating.
Widely used in instruments, meters, daily hardware, household appliances, aircraft, automobiles, motorcycles, bicycles and other exposed parts. Functional chrome plating includes hard chrome plating, porous chrome, black chrome, opal chrome and so on.
Hard chrome layer is mainly used for various measuring calipers, gauges, cutting tools and various types of shaft, loose hole chrome layer is mainly used for cylinder cavity piston failure; The black chrome layer is used for parts that need a dull surface and wear resistance, such as aviation instruments, optical instruments, photographic equipment, etc. Opalescent chromium is mainly used in various measuring tools.
5. Tin plating
Compared to the steel substrate, tin is a negative polar coating, while compared to the copper substrate, it is an anode coating. The tinning layer is mainly used as the protective layer of thin plate in the can industry, and most of the malleable iron skin is made of iron plate tinning. Another major use of tin coatings is in the electronics and power industries.
6, alloy plating
In a solution, two or more metal ions are co-precipitated on the cathode to form a uniform fine coating process called alloy plating.
Alloy electroplating is superior to single metal electroplating in crystal density, porosity, color, hardness, corrosion resistance, wear resistance, magnetic conductivity, wear resistance and high temperature resistance.
There are more than 240 kinds of electroplating alloys, but less than 40 kinds are actually used in production. It is generally divided into three categories: protective alloy coating, decorative alloy coating and functional alloy coating.
Widely used in aviation, aerospace, navigation, automobile, mining, military, instruments, meters, visual hardware, tableware, Musical Instruments and other industries.
In addition to the above, there are other chemical plating, composite plating, non-metal plating, gold plating, silver plating and so on.
What is polishing?
The surface of the items processed by CNC machining or 3D printing is sometimes rough, and the surface requirements of the products are high, so they need to be polished.
Polishing refers to the use of mechanical, chemical or electrochemical action to reduce the surface roughness of the workpiece in order to obtain a bright, flat surface processing method.
Polishing can not improve the dimensional accuracy or geometric accuracy of the workpiece, but for the purpose of obtaining a smooth surface or mirror gloss, and sometimes to eliminate gloss (extinction).
Several common polishing methods are described below:
01. Mechanical polishing
Mechanical polishing is by cutting, plastic deformation of the surface of the material to remove the polished convex and smooth surface polishing method, the general use of whetstone strip, wool wheel, sandpaper, etc., mainly manual operation, surface quality requirements can be used to super-fine polishing method.
Super finishing polishing is the use of special grinding tools, in the polishing liquid containing abrasive, tightly pressed on the workpiece to be machined surface, for high-speed rotation. This method is often used in optical lens molds.
02. Chemical polishing
Chemical polishing is to dissolve the microscopic protruding part of the surface of the material in the chemical medium preferentially than the concave part, so as to obtain a smooth surface.
The main advantage of this method is that it does not require complex equipment, can polish the workpiece with complex shape, and can polish many workpieces at the same time, with high efficiency.
The core problem of chemical polishing is the preparation of polishing liquid.
03. Electrolytic polishing
The basic principle of electrolytic polishing is the same as that of chemical polishing, that is, the surface is smooth by selectively dissolving small protruding parts on the surface of the material.
Compared with chemical polishing, the effect of cathode reaction can be eliminated and the effect is better.
04. Ultrasonic polishing
The workpiece is put into the abrasive suspension and placed together in the ultrasonic field, and the abrasive is ground and polished on the workpiece surface by relying on the oscillation of the ultrasonic wave.
Ultrasonic processing macroscopic force is small, will not cause workpiece deformation, but tooling production and installation is more difficult.
05. Fluid polishing
Fluid polishing relies on high-speed flowing liquid and the abrasive particles it carries to wash the surface of the workpiece to achieve the purpose of polishing.
Common methods are: abrasive jet processing, liquid jet processing, hydrodynamic grinding and so on. Hydrodynamic grinding is driven by hydraulic pressure to make the liquid medium carrying abrasive particles flow through the surface of the workpiece at high speed.
The medium is mainly made of special compounds with good flow under low pressure and mixed with abrasives, which can be silicon carbide powder.
06. Magnetic grinding polishing
Magnetic grinding and polishing is the use of magnetic abrasive under the action of magnetic field to form an abrasive brush, grinding the workpiece.
This method has the advantages of high processing efficiency, good quality, easy control of processing conditions and good working conditions.
The above are 6 common polishing processe.
HONSCN Precision has been a professional CNC machining manufacturer for 20 years. Cooperation with more than 1,000 enterprises, deep technology accumulation, senior technician team, welcome to consult customized processing!Customer service
1. The unmarked shape tolerance shall meet the requirements of gb1184-80.
2. The allowable deviation of unmarked length dimension is 0.5mm.
3. Unspecified fillet radius R5.
4. All undeclared chamfers are C2.
5. Blunt acute angle.
6. Blunt sharp edges, remove burrs and flash.
1. There shall be no scratch, scratch and other defects damaging the part surface on the part processing surface.
2. The machined thread surface shall be free of defects such as black skin, bump, random buckle and burr.
Before painting, rust, scale, grease, dust, soil, salt and dirt must be removed from the surface of all steel parts to be painted.
3. Before derusting, remove grease and dirt on the surface of iron and steel parts with organic solvent, alkali solution, emulsifier and steam.
4. The time interval between the surface to be coated by shot peening or manual derusting and the primer shall not be more than 6h.
5. The surfaces of riveted parts in contact with each other must be coated with a thickness of 30 40 before connection M antirust paint. Lap edges shall be closed with paint, putty or adhesive. The primer damaged due to processing or welding shall be repainted.
3 Heat treatment of parts:
1. After quenching and tempering, HRC50 55.
2. Medium carbon steel: 45 or 40Cr parts are subject to high-frequency quenching, tempering at 350 370 , and hrc40 45.
3. Carburizing depth 0.3mm.
4. Carry out high temperature aging treatment.
4 Technical requirements after finishing
1. The finished parts shall not be placed directly on the ground, and necessary support and protection measures shall be taken. 2. The machined surface shall be free of rust, corrosion, bumps, scratches and other defects affecting performance, service life or appearance.
3. There shall be no peeling on the surface finished by rolling.
4. There shall be no oxide scale on the surface of the parts after heat treatment in the final process. The finished mating surface and tooth surface shall not be annealed
5 Sealing treatment of parts:
1. All seals must be soaked with oil before assembly.
2. Before assembly, strictly check and remove the sharp corners, burrs and foreign matters left during part processing. Ensure that the seal is not scratched during installation.
3. The excess adhesive flowing out shall be removed after bonding.
1. After the gear is assembled, the contact spots and backlash on the tooth surface shall comply with the provisions of GB10095 and gb11365.
2. The reference end face of the gear (worm gear) shall fit the shaft shoulder (or the end face of the positioning sleeve), and it cannot be checked with a 0.05mm feeler gauge. The perpendicularity between the gear reference end face and the axis shall be ensured.
3. The joint surface of gearbox and cover shall be in good contact.
1. The casting tolerance zone is symmetrical to the basic dimensional configuration of the blank casting.
2. Cold lap, crack, shrinkage cavity, penetrating defect and serious incomplete defect (such as under casting, mechanical damage, etc.) are not allowed on the casting surface.
3. The casting shall be cleaned without burrs and flash. The pouring and riser on the non machining indication shall be cleaned and flush with the casting surface.
4. The cast words and marks on the non machined surface of the casting shall be clear and legible, and the position and font shall meet the drawing requirements.
5. The roughness of non machined surface of casting, sand casting R, shall not be greater than 50 m
6. The pouring riser, flying thorn, etc. shall be removed from the casting. The residual amount of pouring and riser on the non machined surface shall be leveled and polished to meet the surface quality requirements.
7. The molding sand, core sand and core bone on the casting shall be removed.
8. The casting has inclined parts, and its dimensional tolerance zone shall be configured symmetrically along the inclined plane.
9. The molding sand, core sand, core bone, fleshy, sticky sand, etc. on the casting shall be shoveled, ground and cleaned.
10. The wrong type and boss casting deviation shall be corrected to achieve a smooth transition and ensure the appearance quality.
11. The wrinkle on the non machined surface of the casting shall be less than 2mm deep and the spacing shall be greater than 100mm.
12. The non machined surfaces of machine product castings shall be shot peened or roller treated to meet the requirements of cleanliness Sa21 / 2.
13. Castings must be water toughened.
14. The casting surface shall be flat, and the gate, burr, sand sticking, etc. shall be removed.
15. Casting defects such as cold shuts, cracks and holes that are detrimental to use are not allowed.
1. The nozzle and riser of each ingot shall have sufficient cutting amount to ensure that the forging has no shrinkage cavity and serious deflection.
2. Forgings shall be forged on a forging press with sufficient capacity to ensure full penetration in the forging.
3. Forgings are not allowed to have visible cracks, folds and other appearance defects affecting use. Local defects can be removed, but the cleaning depth shall not exceed 75% of the machining allowance. The defects on the non machined surface of forgings shall be cleaned and smoothly transition.
4. Forgings shall be free of white spots, internal cracks and residual shrinkage cavities.
2. The allowable deviation of unmarked length dimension is 0.5mm.
3. Unspecified fillet radius R5.
4. All undeclared chamfers are C2.
5. Blunt acute angle.
6. Blunt sharp edges, remove burrs and flash.
1. There shall be no scratch, scratch and other defects damaging the part surface on the part processing surface.
2. The machined thread surface shall be free of defects such as black skin, bump, random buckle and burr.
Before painting, rust, scale, grease, dust, soil, salt and dirt must be removed from the surface of all steel parts to be painted.
3. Before derusting, remove grease and dirt on the surface of iron and steel parts with organic solvent, alkali solution, emulsifier and steam.
4. The time interval between the surface to be coated by shot peening or manual derusting and the primer shall not be more than 6h.
5. The surfaces of riveted parts in contact with each other must be coated with a thickness of 30 40 before connection M antirust paint. Lap edges shall be closed with paint, putty or adhesive. The primer damaged due to processing or welding shall be repainted.
3 Heat treatment of parts:
1. After quenching and tempering, HRC50 55.
2. Medium carbon steel: 45 or 40Cr parts are subject to high-frequency quenching, tempering at 350 370 , and hrc40 45.
3. Carburizing depth 0.3mm.
4. Carry out high temperature aging treatment.
4 Technical requirements after finishing
1. The finished parts shall not be placed directly on the ground, and necessary support and protection measures shall be taken. 2. The machined surface shall be free of rust, corrosion, bumps, scratches and other defects affecting performance, service life or appearance.
3. There shall be no peeling on the surface finished by rolling.
4. There shall be no oxide scale on the surface of the parts after heat treatment in the final process. The finished mating surface and tooth surface shall not be annealed
5 Sealing treatment of parts:
1. All seals must be soaked with oil before assembly.
2. Before assembly, strictly check and remove the sharp corners, burrs and foreign matters left during part processing. Ensure that the seal is not scratched during installation.
3. The excess adhesive flowing out shall be removed after bonding.
1. After the gear is assembled, the contact spots and backlash on the tooth surface shall comply with the provisions of GB10095 and gb11365.
2. The reference end face of the gear (worm gear) shall fit the shaft shoulder (or the end face of the positioning sleeve), and it cannot be checked with a 0.05mm feeler gauge. The perpendicularity between the gear reference end face and the axis shall be ensured.
3. The joint surface of gearbox and cover shall be in good contact.
1. The casting tolerance zone is symmetrical to the basic dimensional configuration of the blank casting.
2. Cold lap, crack, shrinkage cavity, penetrating defect and serious incomplete defect (such as under casting, mechanical damage, etc.) are not allowed on the casting surface.
3. The casting shall be cleaned without burrs and flash. The pouring and riser on the non machining indication shall be cleaned and flush with the casting surface.
4. The cast words and marks on the non machined surface of the casting shall be clear and legible, and the position and font shall meet the drawing requirements.
5. The roughness of non machined surface of casting, sand casting R, shall not be greater than 50 m
6. The pouring riser, flying thorn, etc. shall be removed from the casting. The residual amount of pouring and riser on the non machined surface shall be leveled and polished to meet the surface quality requirements.
7. The molding sand, core sand and core bone on the casting shall be removed.
8. The casting has inclined parts, and its dimensional tolerance zone shall be configured symmetrically along the inclined plane.
9. The molding sand, core sand, core bone, fleshy, sticky sand, etc. on the casting shall be shoveled, ground and cleaned.
10. The wrong type and boss casting deviation shall be corrected to achieve a smooth transition and ensure the appearance quality.
11. The wrinkle on the non machined surface of the casting shall be less than 2mm deep and the spacing shall be greater than 100mm.
12. The non machined surfaces of machine product castings shall be shot peened or roller treated to meet the requirements of cleanliness Sa21 / 2.
13. Castings must be water toughened.
14. The casting surface shall be flat, and the gate, burr, sand sticking, etc. shall be removed.
15. Casting defects such as cold shuts, cracks and holes that are detrimental to use are not allowed.
1. The nozzle and riser of each ingot shall have sufficient cutting amount to ensure that the forging has no shrinkage cavity and serious deflection.
2. Forgings shall be forged on a forging press with sufficient capacity to ensure full penetration in the forging.
3. Forgings are not allowed to have visible cracks, folds and other appearance defects affecting use. Local defects can be removed, but the cleaning depth shall not exceed 75% of the machining allowance. The defects on the non machined surface of forgings shall be cleaned and smoothly transition.
4. Forgings shall be free of white spots, internal cracks and residual shrinkage cavities.
General steps of plastic parts designPlastic parts are designed on the basis of industrial modeling. First, see whether there are similar products for reference, and then carry out detailed functional decomposition of products and parts to determine the main process problems such as parts folding, wall thickness, demoulding slope, transition treatment between parts, connection treatment and strength treatment of parts.1. Similar reference
Before design, first look for similar products of the company and peers, what problems and deficiencies have occurred in the original products, and refer to the existing mature structure to avoid problematic structural forms.2. Determine the part discount, transition, connection and clearance treatment between partsUnderstand the modeling style from the modeling drawing and effect drawing, cooperate with the functional decomposition of the product, determine the number of parts (different surface states are either divided into different parts, or there must be over treatment between different surfaces), determine the over treatment between parts' surfaces, and determine the connection mode and fit clearance between parts.
3. Determination of part strength and connection strengthDetermine the wall thickness of the part body according to the product size. The strength of the part itself is determined by the wall thickness of the plastic part, the structural form (the plastic part in the shape of a flat plate has the worst strength), the stiffener and the stiffener. While determining the single strength of parts, the connection strength between parts must be determined. The methods to change the connection strength include: adding screw column, adding stop, adding buckle position and adding reinforcing bone against top and bottom.4. Determination of demoulding slope
The demoulding slope shall be comprehensively determined according to the material (PP, PE silica gel and rubber can be demoulded forcibly), surface state (the slope of decorative grain shall be greater than that of smooth surface, and the slope of etched surface shall be 0.5 degrees greater than that required by the template as far as possible, so as to ensure that the etched surface will not be damaged and improve the yield of products), transparency or not determines the demoulding slope of parts (the transparent slope shall be greater).Material types recommended by different product series of the companySurface treatment of plastic parts
Wall thickness selection of plastic partsFor plastic parts, the uniformity of wall thickness is required, and the workpiece with uneven wall thickness will have shrinkage traces. It is required that the ratio of stiffener to main wall thickness should be less than 0.4, and the maximum ratio should not exceed 0.6.Demoulding slope of plastic parts
In the construction of stereoscopic drawing, where the appearance and assembly are affected, the slope needs to be drawn, and the slope is generally not drawn for stiffeners.The demoulding slope of plastic parts is determined by the material, surface decoration status and whether the parts are transparent or not. The demoulding slope of hard plastic is greater than that of soft plastic. The higher the part, the deeper the hole, and the smaller the slope.Recommended demoulding slope for different materials
Numerical values of different accuracy in different size rangesDimensional accuracy of plastic partsGenerally, the accuracy of plastic parts is not high. In practical use, we mainly check the assembly dimensions, and mainly mark the overall dimensions, assembly dimensions and other dimensions that need to be controlled on the plan.
In practice, we mainly consider the consistency of dimensions. The edges of the upper and lower covers need to be aligned.Economic accuracy of different materialsNumerical values of different accuracy in different size ranges
Surface roughness of plastics1) The roughness of the etched surface cannot be marked. Where the plastic surface finish is particularly high, circle this range and mark the surface state as mirror.2) The surface of plastic parts is generally smooth and bright, and the surface roughness is generally ra2.5 0.2um.
3) The surface roughness of plastic mainly depends on the surface roughness of mold cavity. The surface roughness of mold is required to be one to two levels higher than that of plastic parts. The mold surface can reach ra0.05 by ultrasonic and electrolytic polishing.FilletThe fillet value of injection molding is determined by the adjacent wall thickness, generally 0.5 1.5 times of the wall thickness, but not less than 0.5mm.
The position of the parting surface shall be carefully selected. There is a fillet on the parting surface, and the fillet part shall be on the other side of the die. It is difficult to make, and there are fine trace lines at the fillet. However, fillet is required when anti cutting hand is required.Stiffener problemThe injection molding process is similar to the casting process. The non-uniformity of wall thickness will produce shrinkage defects. Generally, the wall thickness of reinforcement is 0.4 times of the main body thickness, and the maximum is no more than 0.6 times. The spacing between bars is greater than 4T, and the height of bars is less than 3T. In the method of improving the strength of parts, it is generally reinforced without increasing the wall thickness.
The reinforcement of the screw column shall be at least 1.0mm lower than the end face of the column, and the reinforcement shall be at least 1.0mm lower than the part surface or the parting surface.When multiple bars intersect, pay attention to the non-uniformity of wall thickness caused by the intersection.Design of stiffeners for plastic parts
Bearing surfacePlastic is easy to deform. In terms of positioning, it should be classified as the positioning of wool embryo. In terms of positioning area, it should be small. For example, the support of plane should be changed into small convex points and convex rings.Oblique roof and row position
The inclined top and row position move in the parting direction and perpendicular to the parting direction. The inclined top and row position shall be perpendicular to the parting direction, and there shall be sufficient movement space, as shown in the following figure:Treatment of plastic limit process problems1) Special treatment of wall thickness
For particularly large workpieces, such as the shell of toy cars, the wall thickness can be relatively thin by using the method of multi-point glue feeding. The local glue position of the column is thick, which is treated as shown in the following figure.Special treatment of wall thickness2) Treatment of small slope and vertical surface
The die surface has high dimensional accuracy, high surface finish, small demoulding resistance and small demoulding slope. In order to achieve this purpose, the parts with small inclination of the workpiece are inserted separately, and the inserts are processed by wire cutting and grinding, as shown in the figure below.To ensure that the side wall is vertical, the running position or inclined top is required. There is an interface line at the running position. In order to avoid obvious interface, the wiring is generally placed at the junction of fillet and large surface.Treatment of small slope and vertical surface
To ensure that the side wall is vertical, the running position or inclined top is required. There is an interface line at the running position. In order to avoid obvious interface, the wiring is generally placed at the junction of fillet and large surface.Problems often to be solved for plastic parts1) Transition processing problem
The accuracy of plastic parts is generally not high. There must be transition treatment between adjacent parts and different surfaces of the same part.Small grooves are generally used for transition between different surfaces of the same part, and small grooves and high-low staggered surfaces can be used between different parts, as shown in the figure.Surface over treatment
2) Clearance value of plastic partsParts are directly assembled without movement, generally 0.1mm;The seam is generally 0.15mm;
The minimum clearance between parts without contact is 0.3mm, generally 0.5mm.3) The common forms and clearance of plastic parts are shown in the figureCommon forms and clearance taking method of stop of plastic parts
Before design, first look for similar products of the company and peers, what problems and deficiencies have occurred in the original products, and refer to the existing mature structure to avoid problematic structural forms.2. Determine the part discount, transition, connection and clearance treatment between partsUnderstand the modeling style from the modeling drawing and effect drawing, cooperate with the functional decomposition of the product, determine the number of parts (different surface states are either divided into different parts, or there must be over treatment between different surfaces), determine the over treatment between parts' surfaces, and determine the connection mode and fit clearance between parts.
3. Determination of part strength and connection strengthDetermine the wall thickness of the part body according to the product size. The strength of the part itself is determined by the wall thickness of the plastic part, the structural form (the plastic part in the shape of a flat plate has the worst strength), the stiffener and the stiffener. While determining the single strength of parts, the connection strength between parts must be determined. The methods to change the connection strength include: adding screw column, adding stop, adding buckle position and adding reinforcing bone against top and bottom.4. Determination of demoulding slope
The demoulding slope shall be comprehensively determined according to the material (PP, PE silica gel and rubber can be demoulded forcibly), surface state (the slope of decorative grain shall be greater than that of smooth surface, and the slope of etched surface shall be 0.5 degrees greater than that required by the template as far as possible, so as to ensure that the etched surface will not be damaged and improve the yield of products), transparency or not determines the demoulding slope of parts (the transparent slope shall be greater).Material types recommended by different product series of the companySurface treatment of plastic parts
Wall thickness selection of plastic partsFor plastic parts, the uniformity of wall thickness is required, and the workpiece with uneven wall thickness will have shrinkage traces. It is required that the ratio of stiffener to main wall thickness should be less than 0.4, and the maximum ratio should not exceed 0.6.Demoulding slope of plastic parts
In the construction of stereoscopic drawing, where the appearance and assembly are affected, the slope needs to be drawn, and the slope is generally not drawn for stiffeners.The demoulding slope of plastic parts is determined by the material, surface decoration status and whether the parts are transparent or not. The demoulding slope of hard plastic is greater than that of soft plastic. The higher the part, the deeper the hole, and the smaller the slope.Recommended demoulding slope for different materials
Numerical values of different accuracy in different size rangesDimensional accuracy of plastic partsGenerally, the accuracy of plastic parts is not high. In practical use, we mainly check the assembly dimensions, and mainly mark the overall dimensions, assembly dimensions and other dimensions that need to be controlled on the plan.
In practice, we mainly consider the consistency of dimensions. The edges of the upper and lower covers need to be aligned.Economic accuracy of different materialsNumerical values of different accuracy in different size ranges
Surface roughness of plastics1) The roughness of the etched surface cannot be marked. Where the plastic surface finish is particularly high, circle this range and mark the surface state as mirror.2) The surface of plastic parts is generally smooth and bright, and the surface roughness is generally ra2.5 0.2um.
3) The surface roughness of plastic mainly depends on the surface roughness of mold cavity. The surface roughness of mold is required to be one to two levels higher than that of plastic parts. The mold surface can reach ra0.05 by ultrasonic and electrolytic polishing.FilletThe fillet value of injection molding is determined by the adjacent wall thickness, generally 0.5 1.5 times of the wall thickness, but not less than 0.5mm.
The position of the parting surface shall be carefully selected. There is a fillet on the parting surface, and the fillet part shall be on the other side of the die. It is difficult to make, and there are fine trace lines at the fillet. However, fillet is required when anti cutting hand is required.Stiffener problemThe injection molding process is similar to the casting process. The non-uniformity of wall thickness will produce shrinkage defects. Generally, the wall thickness of reinforcement is 0.4 times of the main body thickness, and the maximum is no more than 0.6 times. The spacing between bars is greater than 4T, and the height of bars is less than 3T. In the method of improving the strength of parts, it is generally reinforced without increasing the wall thickness.
The reinforcement of the screw column shall be at least 1.0mm lower than the end face of the column, and the reinforcement shall be at least 1.0mm lower than the part surface or the parting surface.When multiple bars intersect, pay attention to the non-uniformity of wall thickness caused by the intersection.Design of stiffeners for plastic parts
Bearing surfacePlastic is easy to deform. In terms of positioning, it should be classified as the positioning of wool embryo. In terms of positioning area, it should be small. For example, the support of plane should be changed into small convex points and convex rings.Oblique roof and row position
The inclined top and row position move in the parting direction and perpendicular to the parting direction. The inclined top and row position shall be perpendicular to the parting direction, and there shall be sufficient movement space, as shown in the following figure:Treatment of plastic limit process problems1) Special treatment of wall thickness
For particularly large workpieces, such as the shell of toy cars, the wall thickness can be relatively thin by using the method of multi-point glue feeding. The local glue position of the column is thick, which is treated as shown in the following figure.Special treatment of wall thickness2) Treatment of small slope and vertical surface
The die surface has high dimensional accuracy, high surface finish, small demoulding resistance and small demoulding slope. In order to achieve this purpose, the parts with small inclination of the workpiece are inserted separately, and the inserts are processed by wire cutting and grinding, as shown in the figure below.To ensure that the side wall is vertical, the running position or inclined top is required. There is an interface line at the running position. In order to avoid obvious interface, the wiring is generally placed at the junction of fillet and large surface.Treatment of small slope and vertical surface
To ensure that the side wall is vertical, the running position or inclined top is required. There is an interface line at the running position. In order to avoid obvious interface, the wiring is generally placed at the junction of fillet and large surface.Problems often to be solved for plastic parts1) Transition processing problem
The accuracy of plastic parts is generally not high. There must be transition treatment between adjacent parts and different surfaces of the same part.Small grooves are generally used for transition between different surfaces of the same part, and small grooves and high-low staggered surfaces can be used between different parts, as shown in the figure.Surface over treatment
2) Clearance value of plastic partsParts are directly assembled without movement, generally 0.1mm;The seam is generally 0.15mm;
The minimum clearance between parts without contact is 0.3mm, generally 0.5mm.3) The common forms and clearance of plastic parts are shown in the figureCommon forms and clearance taking method of stop of plastic parts
Shenzhen, China With an array of advanced machining equipments and a team of qualified and experienced technicians and engineers, Runsom Precision boasts of supplying custom machined parts to their industrial clients in a timely manner. According to the spokesperson of the company, they can ship the custom machining parts within 48 hours of receiving the order from the client.
The spokesperson reveals that they maintain a streamlined machining process that makes them capable of shipping China machining parts that precisely meet the specifications supplied by a client. By supplying precision and custom parts in a timely and regular manner, they allow their industrial clients to keep innovating and producing new goods to gain a competitive advantage in the market. They deliver precision machined components within the scheduled time for industries to carry out their production work continually and without any interruption.
According to the spokesperson, they enjoy an excellent reputation in the industry for their outstanding China machining service . They maintain high precision of all machined components, including the holes, axis and the center distance. Moreover, they employ multiple machines for different types of components to help achieve the highest possible degree of precision. The multiple-machining technique proves very important to reduce the production cost and also shortens the project duration. This also gives them the ability to process complex components that need to pass through different machining processes.
Not only cost and customization, but Runsom Precision also focuses on the quality when it comes to supplying CNC Machining parts . The spokesperson maintains that their machining process is strictly according to the ISO 9001:200 standards and the machining of each component is monitored for their quality. According to him, with a stringent quality control measure, they take extra care to make sure that defect free machined parts are delivered to the clients. Their custom machining ensures that clients get the product that exactly meets their specification.
To know more about their machining process, one can visit their website
About Runsom Precision
Runsom Precision Co. Ltd, established since 2005, is a professional, customized, high precision machined components manufacturer based in Shenzhen, China. With years of experience in the manufacturing and services of CNC machined parts, precision engineering components, custom machined parts, Precision CNC machining service, injection molding parts and die casting parts, the company has established a high reputation for their high quality and nice service. They are able to provide one-stop services from initial concept to finished products.
Contact:
Lucy Zhang (sales)
Company: Runsom precision co.,ltd
Phone no: 86-755-3309675
The spokesperson reveals that they maintain a streamlined machining process that makes them capable of shipping China machining parts that precisely meet the specifications supplied by a client. By supplying precision and custom parts in a timely and regular manner, they allow their industrial clients to keep innovating and producing new goods to gain a competitive advantage in the market. They deliver precision machined components within the scheduled time for industries to carry out their production work continually and without any interruption.
According to the spokesperson, they enjoy an excellent reputation in the industry for their outstanding China machining service . They maintain high precision of all machined components, including the holes, axis and the center distance. Moreover, they employ multiple machines for different types of components to help achieve the highest possible degree of precision. The multiple-machining technique proves very important to reduce the production cost and also shortens the project duration. This also gives them the ability to process complex components that need to pass through different machining processes.
Not only cost and customization, but Runsom Precision also focuses on the quality when it comes to supplying CNC Machining parts . The spokesperson maintains that their machining process is strictly according to the ISO 9001:200 standards and the machining of each component is monitored for their quality. According to him, with a stringent quality control measure, they take extra care to make sure that defect free machined parts are delivered to the clients. Their custom machining ensures that clients get the product that exactly meets their specification.
To know more about their machining process, one can visit their website
About Runsom Precision
Runsom Precision Co. Ltd, established since 2005, is a professional, customized, high precision machined components manufacturer based in Shenzhen, China. With years of experience in the manufacturing and services of CNC machined parts, precision engineering components, custom machined parts, Precision CNC machining service, injection molding parts and die casting parts, the company has established a high reputation for their high quality and nice service. They are able to provide one-stop services from initial concept to finished products.
Contact:
Lucy Zhang (sales)
Company: Runsom precision co.,ltd
Phone no: 86-755-3309675
DETROIT-Executives from four auto parts companies said Tuesday that they don't expect widespread fallout from a shortage of a key ingredient in plastic resin following a factory explosion.Officials with Delphi Automotive, Illinois Tool Works, AK Steel and Parker Hannifin said during conference calls to discuss their companies' earnings that a shortage of PA-12 shouldn't disrupt their operations.Automakers and parts companies have been scrambling to find substitutes since a factory in Germany that makes much of the world's supply of the ingredient suspended production after it exploded in March.The resin is used in hundreds of parts. It's most critical in fuel and brake lines because it can carry gasoline and other fluids without deteriorating.Companies that make fuel lines, brake lines and connectors have been worried they will run out of PA-12 and they may have to stop shipments to automakers and larger parts suppliers. One key fuel line maker, TI Automotive, warned last week that the auto production interruptions are likely in the next few weeks. TI and a trade group of suppliers held an industrywide meeting last week to look at the remaining supply of PA-12 and encourage faster testing of alternatives.But Rodney O'Neal, CEO of Delphi, one of the largest parts suppliers, said he sees little impact on Delphi or auto production."I don't see this as a crisis in terms of tremendous downtime at all for anyone around the world," O'Neal said. He said the auto industry is addressing the problem quickly and with flexibility.Delphi, a Troy, Mich., supplier of audio systems, fuel pumps, wiring connectors and other items, uses PA-12 in a small number of parts and has lined up substitutes, O'Neal said."We believe there's enough inventory in the channel right now to handle this," John Brooklier, vice president of investor relations for Illinois Tool Works, told investors on a separate call Tuesday. He said the Glenview, Ill., maker of metal and plastic parts such as door handles uses little PA-12 but is watching the impact on auto companies.At AK Steel, CEO James Wainscott said customers are telling the company that any shortage is likely to be a challenge mostly for European automakers in the U.S.The West Chester, Ohio, company, he said, was concerned about the problem until the last day or so."There may be some trickle-lower effect here, but we don't look for that to be a great concern," Wainscott told investors.Automakers say the issue hasn't interrupted production thus far. The shortage was caused by a March 31 explosion at Evonik Industries' plant. The factory supplied at least a quarter of the world's PA-12, and about 70 percent of a chemical that's used by other companies to make resin. Evonik has said the plant will be out of operation for at least three months.At Parker Hannifin, a maker of valves, filters, pumps and hoses, CEO Donald Washkewicz said his company isn't in the fuel line business but does use PA-12, also known as nylon-12, in air brake tubing and other parts. The Cleveland-based company, he said, has been using alternate materials."We're able to keep our customers out of trouble," Washkewicz said.But Washkewicz said the shortage could drive up the cost of raw materials used to make plastic parts.Few plastics can do what PA-12 does. The chemical doesn't absorb as much moisture as other plastics and will stand up to carrying gasoline, brake fluid and other hydrocarbon liquids. Sadhan Jana, a professor of polymer engineering at the University of Akron in Ohio, said he knows of no other plastic as as durable as PA-12.Any substitute would have to go through rigorous testing to make sure it would work for a specific automotive part, Jana says. Those tests could take months.Automakers and suppliers are close to agreeing on a fast-track process for testing replacements.The Automotive Industry Action Group, a nonprofit trade group, said Monday that General Motors Co., Ford Motor Co., Chrysler Group, Honda Motor Co., Hyundai-Kia, Volkswagen AG and their suppliers, are expected to finalize new testing standards next week. The agreement would reduce the interim approval process for new materials to three weeks from the current eight weeks or longer.AIAG said the group feels confident it can shorten the testing time because alternative resins are already well known and previous testing has accurately predicted real-world performance.
no data
more products
Send your inquiry
you might like
no data
Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
Copyright © 2025 HONSCN |Sitemap Privacy Policy