Cnc Laser Machine Parts Buying Guide
Honscn Co.,Ltd has invested great efforts in producing cnc laser machine parts featured by premium performance. We have been working on staff training projects like operation management to improve manufacturing efficiency. This will lead to increased productivity, bringing internal costs down. What's more, by accumulating more knowledge about quality control, we manage to achieve near zero-defect manufacturing.
We wish to maintain the hard-earned reputation for bringing added value to the business of customers with our HONSCN branded products. Throughout the entire development process, we urge to build long-term relationships with customers, bringing them the most dependable products to help their business achieve results. HONSCN products always help customers maintain a professional image.
Pricing self-discipline is the principle we hold fast to. We have a very strict quotation mechanism which takes into consideration of the actual production cost of different categories of different complexities plus gross profit rate based on strict financial & auditing models. Due to our lean cost control measures during each process, we provide the most competitive quote on Honscn for customers.
Shenzhen Honscn is a professional manufacturer of CNC Machine Parts, Auto Lathe Machine Parts, and Screw Fasteners. We offer OEM and ODM service with any related products for customers. We have a professional team of product design and engineers, as well as a professional QC team, our sales and documentation and logistics departments can finish the requirements of presentation of documents under various payment methods and different transportation modes.
Usually, we can provide 3D drawings/drawings, quantities, required manufacturing processes, and materials based on the customer's requirements. Our engineers will carefully review and read them, and provide quotes for them. If customers require it, we will also provide samples according to their requirements.
If confirmed the quotation okay, the customer needs us to provide the Mill Test Crtificate of this product conforming to EU standards, such as CE, RoHS, REACH before placing order. All of our products are in accordance with all the European certification, such as CE, RoHS, REACH, etc., and all of them have prepared standard documents for customers checking.
After the customer confirms the order, they propose to make it according to their sample. We will make it based on the samples he sent us.
We start to prepare the order materials when customer confirm all the details such as material, size, tolerance, surface finish and other details of the final sample.
After the package such as qty, label, shipping mark etc. are provided by customer, we starts to arrange the mass production. After all the goods finished, send pictures to customer for approval. We promise the packag is same as customer requested, mass products are exactly the same as the final samples. The following photos of the shipment, the passing rate of the third-party inspection of our company is 100%.
After the customer receives the sample, they will apply our product to the machine equipment for accessory assembly. Ensuring smooth assembly of the machine. We always pay much attention to the quality of our products, which is recognized by customers and repurchased constantly.
Usually, we can provide 3D drawings/drawings, quantities, required manufacturing processes, and materials based on the customer's requirements. Our engineers will carefully review and read them, and provide quotes for them. If customers require it, we will also provide samples according to their requirements.
If confirmed the quotation okay, the customer needs us to provide the Mill Test Crtificate of this product conforming to EU standards, such as CE, RoHS, REACH before placing order. All of our products are in accordance with all the European certification, such as CE, RoHS, REACH, etc., and all of them have prepared standard documents for customers checking.
After the customer confirms the order, they propose to make it according to their sample. We will make it based on the samples he sent us.
We start to prepare the order materials when customer confirm all the details such as material, size, tolerance, surface finish and other details of the final sample.
After the package such as qty, label, shipping mark etc. are provided by customer, we starts to arrange the mass production. After all the goods finished, send pictures to customer for approval. We promise the packag is same as customer requested, mass products are exactly the same as the final samples. The following photos of the shipment, the passing rate of the third-party inspection of our company is 100%.
After the customer receives the sample, they will apply our product to the machine equipment for accessory assembly. Ensuring smooth assembly of the machine. We always pay much attention to the quality of our products, which is recognized by customers and repurchased constantly.
With the rapid development of science and technology, CNC machining technology is increasingly widely used in the medical industry. Its high precision, efficiency and compatibility provide a strong guarantee for the manufacture of medical devices and equipment.
According to statistics from international market research institutions, the global medical device market is increasing year by year and is expected to reach about 520 billion US dollars by 2025. In China, the scale of the medical device market is also continuing to expand, and is expected to reach 160 billion yuan by 2023. In this context, the application of CNC machining technology in the medical industry is particularly important.
CNC machining can process a wide range of materials, from metals and alloys to ceramics. Nevertheless, there are some requirements for medical equipment and devices. Depending on the specific use of the part or product, the material must be biocompatible or approved as medical grade.
It is understood that CNC machining technology can produce accurate, precise and complex surgical instruments, such as minimally invasive surgical instruments and endoscopes. These instruments need to have high accuracy and stability to ensure safety and effectiveness during the surgical procedure. According to relevant data, the global surgical device market is expected to reach about $5 billion by 2024.
In addition, the application of CNC machining in the manufacture of artificial joints, implants and orthopedic devices also provides patients with more treatment options. According to statistics, the global artificial joint market size is expected to reach about $12 billion by 2024. The advantages of CNC machining technology in the manufacturing of medical equipment components have also been fully utilized. The core components of high-end medical equipment, such as medical pumps, CT and MRI scanners, benefit from the high precision, high efficiency and reliability of CNC machining technology.
In terms of biocompatible materials, the compatibility of CNC processing technology and medical device manufacturing has also been widely recognized. According to statistics, the global market for biocompatible materials is expected to reach about $5.5 billion by 2024.
It is worth mentioning that CNC machining technology also supports the manufacture of customized medical parts. This is of great significance for the treatment of rare diseases and rehabilitation of special patients. According to statistics, the global market for customized medical parts is expected to reach about $4.5 billion by 2024.
In summary, the application of CNC machining technology in the medical industry provides a strong guarantee for the improvement of the performance of medical devices and equipment. In the current era of rapid development of science and technology, we have reason to believe that CNC machining technology will play a greater role in the medical industry to help the prosperous development of China's medical cause. With the continuous expansion of the medical device market, the application prospect of CNC machining technology in the medical industry will be broader.
According to statistics from international market research institutions, the global medical device market is increasing year by year and is expected to reach about 520 billion US dollars by 2025. In China, the scale of the medical device market is also continuing to expand, and is expected to reach 160 billion yuan by 2023. In this context, the application of CNC machining technology in the medical industry is particularly important.
CNC machining can process a wide range of materials, from metals and alloys to ceramics. Nevertheless, there are some requirements for medical equipment and devices. Depending on the specific use of the part or product, the material must be biocompatible or approved as medical grade.
It is understood that CNC machining technology can produce accurate, precise and complex surgical instruments, such as minimally invasive surgical instruments and endoscopes. These instruments need to have high accuracy and stability to ensure safety and effectiveness during the surgical procedure. According to relevant data, the global surgical device market is expected to reach about $5 billion by 2024.
In addition, the application of CNC machining in the manufacture of artificial joints, implants and orthopedic devices also provides patients with more treatment options. According to statistics, the global artificial joint market size is expected to reach about $12 billion by 2024. The advantages of CNC machining technology in the manufacturing of medical equipment components have also been fully utilized. The core components of high-end medical equipment, such as medical pumps, CT and MRI scanners, benefit from the high precision, high efficiency and reliability of CNC machining technology.
In terms of biocompatible materials, the compatibility of CNC processing technology and medical device manufacturing has also been widely recognized. According to statistics, the global market for biocompatible materials is expected to reach about $5.5 billion by 2024.
It is worth mentioning that CNC machining technology also supports the manufacture of customized medical parts. This is of great significance for the treatment of rare diseases and rehabilitation of special patients. According to statistics, the global market for customized medical parts is expected to reach about $4.5 billion by 2024.
In summary, the application of CNC machining technology in the medical industry provides a strong guarantee for the improvement of the performance of medical devices and equipment. In the current era of rapid development of science and technology, we have reason to believe that CNC machining technology will play a greater role in the medical industry to help the prosperous development of China's medical cause. With the continuous expansion of the medical device market, the application prospect of CNC machining technology in the medical industry will be broader.
Comparative detection of automobile lamps with three-dimensional scanner
one Industry status
The customer's product is the car lamp. It is difficult to scan the lamp. Because many places on the lamp are transparent, and the laser of the scanner is transparent, it is difficult to scan.
two Limitations of customers' current testing methods
For this car lamp, the customer doesn't have any effective measurement means, and then the customer comes to us. We use hscan handheld 3D laser scanner to help them scan and measure. During the scanning process, we will spray white powder on the transparent part of the object, and through processing, present the data required by the customer completely, and submit the comparison results to the customer.
Firstly, quickly paste the positioning mark point on the scanned air conditioner, spray the lamp with white powder, and then scan the tested part as a whole through non-contact three-dimensional laser scanning, and carefully scan the details. Finally, compare and adjust the obtained data, and make a test report.
two Required instrument and model
Hscan handheld 3D laser scanner Prince series.
three Scanner working hours
It takes 2 minutes to paste the marked points;
Data post-processing and comparison report for ten minutes.
1 scan data
For this kind of car lamp, the hand-held three-dimensional laser scanner has incomparable advantages: first, the point non-contact scanning has no limit on the size of the measured workpiece; Secondly, hand-held scanning, the workpiece does not need to be fixed, and there is no need to specially design the detection fixture, so it can be inspected on arrival. By using our three-dimensional scanner, customers shorten the detection cycle and reduce the detection cost.
Reverse / comparative product display
lw
one Industry status
The customer's product is the car lamp. It is difficult to scan the lamp. Because many places on the lamp are transparent, and the laser of the scanner is transparent, it is difficult to scan.
two Limitations of customers' current testing methods
For this car lamp, the customer doesn't have any effective measurement means, and then the customer comes to us. We use hscan handheld 3D laser scanner to help them scan and measure. During the scanning process, we will spray white powder on the transparent part of the object, and through processing, present the data required by the customer completely, and submit the comparison results to the customer.
Firstly, quickly paste the positioning mark point on the scanned air conditioner, spray the lamp with white powder, and then scan the tested part as a whole through non-contact three-dimensional laser scanning, and carefully scan the details. Finally, compare and adjust the obtained data, and make a test report.
two Required instrument and model
Hscan handheld 3D laser scanner Prince series.
three Scanner working hours
It takes 2 minutes to paste the marked points;
Data post-processing and comparison report for ten minutes.
1 scan data
For this kind of car lamp, the hand-held three-dimensional laser scanner has incomparable advantages: first, the point non-contact scanning has no limit on the size of the measured workpiece; Secondly, hand-held scanning, the workpiece does not need to be fixed, and there is no need to specially design the detection fixture, so it can be inspected on arrival. By using our three-dimensional scanner, customers shorten the detection cycle and reduce the detection cost.
Reverse / comparative product display
lw
1. The unmarked shape tolerance shall meet the requirements of gb1184-80.
2. The allowable deviation of unmarked length dimension is 0.5mm.
3. Unspecified fillet radius R5.
4. All undeclared chamfers are C2.
5. Blunt acute angle.
6. Blunt sharp edges, remove burrs and flash.
1. There shall be no scratch, scratch and other defects damaging the part surface on the part processing surface.
2. The machined thread surface shall be free of defects such as black skin, bump, random buckle and burr.
Before painting, rust, scale, grease, dust, soil, salt and dirt must be removed from the surface of all steel parts to be painted.
3. Before derusting, remove grease and dirt on the surface of iron and steel parts with organic solvent, alkali solution, emulsifier and steam.
4. The time interval between the surface to be coated by shot peening or manual derusting and the primer shall not be more than 6h.
5. The surfaces of riveted parts in contact with each other must be coated with a thickness of 30 40 before connection M antirust paint. Lap edges shall be closed with paint, putty or adhesive. The primer damaged due to processing or welding shall be repainted.
3 Heat treatment of parts:
1. After quenching and tempering, HRC50 55.
2. Medium carbon steel: 45 or 40Cr parts are subject to high-frequency quenching, tempering at 350 370 , and hrc40 45.
3. Carburizing depth 0.3mm.
4. Carry out high temperature aging treatment.
4 Technical requirements after finishing
1. The finished parts shall not be placed directly on the ground, and necessary support and protection measures shall be taken. 2. The machined surface shall be free of rust, corrosion, bumps, scratches and other defects affecting performance, service life or appearance.
3. There shall be no peeling on the surface finished by rolling.
4. There shall be no oxide scale on the surface of the parts after heat treatment in the final process. The finished mating surface and tooth surface shall not be annealed
5 Sealing treatment of parts:
1. All seals must be soaked with oil before assembly.
2. Before assembly, strictly check and remove the sharp corners, burrs and foreign matters left during part processing. Ensure that the seal is not scratched during installation.
3. The excess adhesive flowing out shall be removed after bonding.
1. After the gear is assembled, the contact spots and backlash on the tooth surface shall comply with the provisions of GB10095 and gb11365.
2. The reference end face of the gear (worm gear) shall fit the shaft shoulder (or the end face of the positioning sleeve), and it cannot be checked with a 0.05mm feeler gauge. The perpendicularity between the gear reference end face and the axis shall be ensured.
3. The joint surface of gearbox and cover shall be in good contact.
1. The casting tolerance zone is symmetrical to the basic dimensional configuration of the blank casting.
2. Cold lap, crack, shrinkage cavity, penetrating defect and serious incomplete defect (such as under casting, mechanical damage, etc.) are not allowed on the casting surface.
3. The casting shall be cleaned without burrs and flash. The pouring and riser on the non machining indication shall be cleaned and flush with the casting surface.
4. The cast words and marks on the non machined surface of the casting shall be clear and legible, and the position and font shall meet the drawing requirements.
5. The roughness of non machined surface of casting, sand casting R, shall not be greater than 50 m
6. The pouring riser, flying thorn, etc. shall be removed from the casting. The residual amount of pouring and riser on the non machined surface shall be leveled and polished to meet the surface quality requirements.
7. The molding sand, core sand and core bone on the casting shall be removed.
8. The casting has inclined parts, and its dimensional tolerance zone shall be configured symmetrically along the inclined plane.
9. The molding sand, core sand, core bone, fleshy, sticky sand, etc. on the casting shall be shoveled, ground and cleaned.
10. The wrong type and boss casting deviation shall be corrected to achieve a smooth transition and ensure the appearance quality.
11. The wrinkle on the non machined surface of the casting shall be less than 2mm deep and the spacing shall be greater than 100mm.
12. The non machined surfaces of machine product castings shall be shot peened or roller treated to meet the requirements of cleanliness Sa21 / 2.
13. Castings must be water toughened.
14. The casting surface shall be flat, and the gate, burr, sand sticking, etc. shall be removed.
15. Casting defects such as cold shuts, cracks and holes that are detrimental to use are not allowed.
1. The nozzle and riser of each ingot shall have sufficient cutting amount to ensure that the forging has no shrinkage cavity and serious deflection.
2. Forgings shall be forged on a forging press with sufficient capacity to ensure full penetration in the forging.
3. Forgings are not allowed to have visible cracks, folds and other appearance defects affecting use. Local defects can be removed, but the cleaning depth shall not exceed 75% of the machining allowance. The defects on the non machined surface of forgings shall be cleaned and smoothly transition.
4. Forgings shall be free of white spots, internal cracks and residual shrinkage cavities.
2. The allowable deviation of unmarked length dimension is 0.5mm.
3. Unspecified fillet radius R5.
4. All undeclared chamfers are C2.
5. Blunt acute angle.
6. Blunt sharp edges, remove burrs and flash.
1. There shall be no scratch, scratch and other defects damaging the part surface on the part processing surface.
2. The machined thread surface shall be free of defects such as black skin, bump, random buckle and burr.
Before painting, rust, scale, grease, dust, soil, salt and dirt must be removed from the surface of all steel parts to be painted.
3. Before derusting, remove grease and dirt on the surface of iron and steel parts with organic solvent, alkali solution, emulsifier and steam.
4. The time interval between the surface to be coated by shot peening or manual derusting and the primer shall not be more than 6h.
5. The surfaces of riveted parts in contact with each other must be coated with a thickness of 30 40 before connection M antirust paint. Lap edges shall be closed with paint, putty or adhesive. The primer damaged due to processing or welding shall be repainted.
3 Heat treatment of parts:
1. After quenching and tempering, HRC50 55.
2. Medium carbon steel: 45 or 40Cr parts are subject to high-frequency quenching, tempering at 350 370 , and hrc40 45.
3. Carburizing depth 0.3mm.
4. Carry out high temperature aging treatment.
4 Technical requirements after finishing
1. The finished parts shall not be placed directly on the ground, and necessary support and protection measures shall be taken. 2. The machined surface shall be free of rust, corrosion, bumps, scratches and other defects affecting performance, service life or appearance.
3. There shall be no peeling on the surface finished by rolling.
4. There shall be no oxide scale on the surface of the parts after heat treatment in the final process. The finished mating surface and tooth surface shall not be annealed
5 Sealing treatment of parts:
1. All seals must be soaked with oil before assembly.
2. Before assembly, strictly check and remove the sharp corners, burrs and foreign matters left during part processing. Ensure that the seal is not scratched during installation.
3. The excess adhesive flowing out shall be removed after bonding.
1. After the gear is assembled, the contact spots and backlash on the tooth surface shall comply with the provisions of GB10095 and gb11365.
2. The reference end face of the gear (worm gear) shall fit the shaft shoulder (or the end face of the positioning sleeve), and it cannot be checked with a 0.05mm feeler gauge. The perpendicularity between the gear reference end face and the axis shall be ensured.
3. The joint surface of gearbox and cover shall be in good contact.
1. The casting tolerance zone is symmetrical to the basic dimensional configuration of the blank casting.
2. Cold lap, crack, shrinkage cavity, penetrating defect and serious incomplete defect (such as under casting, mechanical damage, etc.) are not allowed on the casting surface.
3. The casting shall be cleaned without burrs and flash. The pouring and riser on the non machining indication shall be cleaned and flush with the casting surface.
4. The cast words and marks on the non machined surface of the casting shall be clear and legible, and the position and font shall meet the drawing requirements.
5. The roughness of non machined surface of casting, sand casting R, shall not be greater than 50 m
6. The pouring riser, flying thorn, etc. shall be removed from the casting. The residual amount of pouring and riser on the non machined surface shall be leveled and polished to meet the surface quality requirements.
7. The molding sand, core sand and core bone on the casting shall be removed.
8. The casting has inclined parts, and its dimensional tolerance zone shall be configured symmetrically along the inclined plane.
9. The molding sand, core sand, core bone, fleshy, sticky sand, etc. on the casting shall be shoveled, ground and cleaned.
10. The wrong type and boss casting deviation shall be corrected to achieve a smooth transition and ensure the appearance quality.
11. The wrinkle on the non machined surface of the casting shall be less than 2mm deep and the spacing shall be greater than 100mm.
12. The non machined surfaces of machine product castings shall be shot peened or roller treated to meet the requirements of cleanliness Sa21 / 2.
13. Castings must be water toughened.
14. The casting surface shall be flat, and the gate, burr, sand sticking, etc. shall be removed.
15. Casting defects such as cold shuts, cracks and holes that are detrimental to use are not allowed.
1. The nozzle and riser of each ingot shall have sufficient cutting amount to ensure that the forging has no shrinkage cavity and serious deflection.
2. Forgings shall be forged on a forging press with sufficient capacity to ensure full penetration in the forging.
3. Forgings are not allowed to have visible cracks, folds and other appearance defects affecting use. Local defects can be removed, but the cleaning depth shall not exceed 75% of the machining allowance. The defects on the non machined surface of forgings shall be cleaned and smoothly transition.
4. Forgings shall be free of white spots, internal cracks and residual shrinkage cavities.
1 Tool change of hat type magazineThe fixed address tool change mode is mostly adopted, and the tool number is fixed corresponding to the tool seat number. The tool change action is realized by the lateral movement of the tool magazine and the up and down movement of the spindle, which is referred to as the spindle tool change mode for short. Because it has no tool change manipulator, the tool selection action cannot be preselected before the tool change action. The tool change instruction and tool selection instruction are generally written in the same program segment, and the instruction format is as follows:M06 T
When the command is executed, the tool magazine first turns the tool holder corresponding to the tool number on the spindle to the tool change position, and switches the tool on the spindle back to the tool holder, and then the tool magazine turns the tool specified in the command to the tool change position and changes the spindle.For this tool magazine, even if TX x is executed before M06, the tool cannot be preselected, * the action of final tool selection is still executed when M06 is executed. If there is no TX X in front of M06, the system will give an alarm.2 Tool change of disc and chain magazine
Most of them use random address tool change mode. The corresponding relationship between tool number and tool seat number is random, but its corresponding relationship can be remembered by NC system. The tool change of this tool magazine depends on the manipulator. The action of the command and tool change is: the tool command TX controls the rotation of the tool magazine and turns the selected tool to the tool change working position, while the tool change command M06 controls the action of the tool change manipulator to realize the tool exchange between the spindle tool and the tool change position of the tool magazine. The tool selection command and tool change command can be in the same program segment or written separately. The actions corresponding to tool selection and tool change command can also be operated simultaneously or separately. The instruction format is as follows:
Tx x M06;When the command is executed, the tool magazine first turns the TX tool to the tool change position, and then the manipulator exchanges the tool of the tool magazine with the tool of the spindle to realize the purpose of changing the TX tool to the spindle.After reading the above two methods, it can be seen that method 2 overlaps the tool selection action with the machining action, so that when changing the tool, it is not necessary to select the tool and change the tool directly, which improves the work efficiency.
As mentioned earlier, the tool change command of the tool magazine is related to the machine tool manufacturer. For example, some tool magazines require that not only the Z axis must return to the tool change point, but also the Y axis must return to the tool change point. The program format is as follows:
When writing the instructions of tool selection and tool change in the same program section, the execution rules of tools from different manufacturers may also be different. If any, regardless of the writing order, the rules of tool selection and tool change shall be followed. Some rules stipulate that the tool selection command must be written before the tool change command is executed. Otherwise, the action is to change the tool first and then select the tool, as shown in the above program. In this case, if the tool selection command is not written before the M06 command is executed, the system will give an alarm.
When the command is executed, the tool magazine first turns the tool holder corresponding to the tool number on the spindle to the tool change position, and switches the tool on the spindle back to the tool holder, and then the tool magazine turns the tool specified in the command to the tool change position and changes the spindle.For this tool magazine, even if TX x is executed before M06, the tool cannot be preselected, * the action of final tool selection is still executed when M06 is executed. If there is no TX X in front of M06, the system will give an alarm.2 Tool change of disc and chain magazine
Most of them use random address tool change mode. The corresponding relationship between tool number and tool seat number is random, but its corresponding relationship can be remembered by NC system. The tool change of this tool magazine depends on the manipulator. The action of the command and tool change is: the tool command TX controls the rotation of the tool magazine and turns the selected tool to the tool change working position, while the tool change command M06 controls the action of the tool change manipulator to realize the tool exchange between the spindle tool and the tool change position of the tool magazine. The tool selection command and tool change command can be in the same program segment or written separately. The actions corresponding to tool selection and tool change command can also be operated simultaneously or separately. The instruction format is as follows:
Tx x M06;When the command is executed, the tool magazine first turns the TX tool to the tool change position, and then the manipulator exchanges the tool of the tool magazine with the tool of the spindle to realize the purpose of changing the TX tool to the spindle.After reading the above two methods, it can be seen that method 2 overlaps the tool selection action with the machining action, so that when changing the tool, it is not necessary to select the tool and change the tool directly, which improves the work efficiency.
As mentioned earlier, the tool change command of the tool magazine is related to the machine tool manufacturer. For example, some tool magazines require that not only the Z axis must return to the tool change point, but also the Y axis must return to the tool change point. The program format is as follows:
When writing the instructions of tool selection and tool change in the same program section, the execution rules of tools from different manufacturers may also be different. If any, regardless of the writing order, the rules of tool selection and tool change shall be followed. Some rules stipulate that the tool selection command must be written before the tool change command is executed. Otherwise, the action is to change the tool first and then select the tool, as shown in the above program. In this case, if the tool selection command is not written before the M06 command is executed, the system will give an alarm.
no data
more products
Send your inquiry
you might like
no data
Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
Copyright © 2025 HONSCN |Sitemap Privacy Policy