Cnc Machining Parts Service Custom: Things You May Want to Know
Honscn Co.,Ltd, the reliable cnc machining parts service custom producer, endeavors to optimize the production process. We adopt state-of-the-art facilities and practised technicians to enhance productivity and increase efficiency to save time. We operate following the management method of the leading international enterprise to make communication between colleagues more efficient. Moreover, we simplify data collection and transmission to make the production process more smooth.
HONSCN has been constantly marketed toward the overseas region. Through online marketing, our products are widely spread over the foreign countries, so is our brand fame. Many customers know us from different channels like social media. Our regular customers give positive comments online, showcasing our great credit and reliability, which results in the increasing number of customers. Some customers are recommended by their friends who put their deep trust on us.
With our strong sense of responsibility, we offer thoughtful consultation service at Honscn and we believe cnc machining parts service custom will certainly meet the requirements of our potential customers.
no data
1.High-Precision Components: CNC machining offers the ability to create small, high-precision components integral to the functioning of 3C electronics, such as sensors, microcontrollers, and small mechanical parts.
2.Customized Modifications: For repair or modification purposes, CNC machining can produce replacement parts or customized modifications for older or discontinued electronic devices that might not have readily available parts.
3.Quality and Consistency: CNC machining ensures high-quality production and consistency in electronic components, meeting tight tolerances and specifications required by the 3C industry.
4..Mass Production: Once the design is finalized, CNC machining can be employed for mass production of custom components in the 3C electronics industry, ensuring each piece meets exact specifications.
Overall, CNC custom machining plays a pivotal role in the 3C electronics industry by enabling the creation of precise, customized, and high-quality components necessary for modern electronic devices. For custom CNC production services, please choose us and we will provide you with the best quality service and the most competitive price. Let us jointly promote the innovation and development of the 3C Electronics manufacturing industry!
2.Customized Modifications: For repair or modification purposes, CNC machining can produce replacement parts or customized modifications for older or discontinued electronic devices that might not have readily available parts.
3.Quality and Consistency: CNC machining ensures high-quality production and consistency in electronic components, meeting tight tolerances and specifications required by the 3C industry.
4..Mass Production: Once the design is finalized, CNC machining can be employed for mass production of custom components in the 3C electronics industry, ensuring each piece meets exact specifications.
Overall, CNC custom machining plays a pivotal role in the 3C electronics industry by enabling the creation of precise, customized, and high-quality components necessary for modern electronic devices. For custom CNC production services, please choose us and we will provide you with the best quality service and the most competitive price. Let us jointly promote the innovation and development of the 3C Electronics manufacturing industry!
In the field of machining, after CNC machining process methods and division of processes, the main content of the process route is to rationally arrange these processing methods and processing sequence. In general, CNC machining of mechanical parts includes cutting, heat treatment and auxiliary processes such as surface treatment, cleaning and inspection. The sequence of these processes directly affects the quality, production efficiency and cost of the parts. Therefore, when designing CNC machining routes, the order of cutting, heat treatment and auxiliary processes should be reasonably arranged, and the connection problem between them should be solved.
In addition to the basic steps mentioned above, factors such as material selection, fixture design and equipment selection need to be considered when developing a CNC machining route. Material selection is directly related to the final performance of parts, different materials have different requirements for cutting parameters; The fixture design will affect the stability and accuracy of the parts in the process of processing; Equipment selection needs to determine the type of machine tool suitable for its production needs according to the characteristics of the product.
What do we have to do before arranging the CNC machining process route?
1, the processing method of precision machinery parts should be determined according to the characteristics of the surface. On the basis of familiar with the characteristics of various processing methods, mastering the processing economy and surface roughness, the method that can ensure the processing quality, production efficiency and economy is selected.
2, select the appropriate drawing positioning reference, according to the principle of crude and fine reference selection to reasonably determine the positioning reference of each process.
3, When developing the machining process route of the parts, it is necessary to divide the rough, semi-fine and finishing stages of the parts on the basis of the analysis of the parts, and determine the degree of concentration and dispersion of the process, and reasonably arrange the processing sequence of the surfaces. For complex parts, several schemes can be considered first, and the most reasonable processing scheme can be selected after comparison and analysis.
4, determine the processing allowance and process size and tolerance of each process.
5, select machine tools and workers, clips, quantities, cutting tools. The selection of mechanical equipment should not only ensure the quality of processing, but also be economical and reasonable. Under the conditions of mass production, general machine tools and special jigs should generally be used.
6, Determine the technical requirements and inspection methods of each major process.Determining the cutting amount and time quota of each process is usually decided by the operator for a single small batch production plant. It is generally not specified in the machining process card. However, in the medium batch and mass production plants, in order to ensure the rationality of production and the balance of rhythm, it is required that the cutting amount must be specified, and must not be changed at will.
cnc machining process arrangement
First rough and then fine
The processing accuracy is gradually improved according to the order of rough turning - semi-fine turning - fine turning. The rough lathe can remove most of the machining allowance of the workpiece surface in a short time, thereby increasing the metal removal rate and meeting the requirement of the uniformity of the allowance. If the residual amount left after the rough turning does not meet the finishing requirements, it is necessary to arrange a semi-finishing car for finishing. The fine car needs to ensure that the outline of the part is cut according to the drawing size to ensure the processing accuracy.
Approach first and then far
Under normal circumstances, the parts close to the tool should be processed first, and then the parts far away from the tool to the tool should be processed to shorten the moving distance of the tool and reduce the empty travel time. In the process of turning, it is beneficial to maintain the stiffness of the blank or semi-finished product and improve its cutting conditions.
The principle of internal and external intersection
For parts that have both an inner surface (inner cavity) and an outer surface to be processed, when arranging the processing sequence, the inner and outer surfaces should be roughed first, and then the inner and outer surfaces should be finished. Must not be part of the surface of the part (outer surface or inner surface) after processing, then processing other surfaces (inner surface or outer surface).
Base first principle
Priority should be given to the surface used as the finishing reference. This is because the more accurate the surface of the positioning reference, the smaller the clamping error. For example, when machining shaft parts, the center hole is usually machined first, and then the outer surface and end face are machined with the center hole as the precision basis.
The principle of the first and the second
The main working surface and assembly base surface of the parts should be processed first, so as to find out the modern defects on the main surface in the blank early. The secondary surface can be interspersed, placed on the main machined surface to a certain extent, before the final finishing.
The principle of the face before the hole
The plane outline size of the box and bracket parts is large, and the plane is generally processed first, and then the hole and other sizes are processed. This arrangement of processing sequence, on the one hand with the processed plane positioning, stable and reliable; On the other hand, it is easy to process the hole on the machined plane, and can improve the processing accuracy of the hole, especially when drilling, the axis of the hole is not easy to deviate.
Conclusion
When developing the machining process of parts, it is necessary to select the appropriate processing method, machine tool equipment, clamp measuring tools, blank and technical requirements for workers according to the production type of parts.
In addition to the basic steps mentioned above, factors such as material selection, fixture design and equipment selection need to be considered when developing a CNC machining route. Material selection is directly related to the final performance of parts, different materials have different requirements for cutting parameters; The fixture design will affect the stability and accuracy of the parts in the process of processing; Equipment selection needs to determine the type of machine tool suitable for its production needs according to the characteristics of the product.
What do we have to do before arranging the CNC machining process route?
1, the processing method of precision machinery parts should be determined according to the characteristics of the surface. On the basis of familiar with the characteristics of various processing methods, mastering the processing economy and surface roughness, the method that can ensure the processing quality, production efficiency and economy is selected.
2, select the appropriate drawing positioning reference, according to the principle of crude and fine reference selection to reasonably determine the positioning reference of each process.
3, When developing the machining process route of the parts, it is necessary to divide the rough, semi-fine and finishing stages of the parts on the basis of the analysis of the parts, and determine the degree of concentration and dispersion of the process, and reasonably arrange the processing sequence of the surfaces. For complex parts, several schemes can be considered first, and the most reasonable processing scheme can be selected after comparison and analysis.
4, determine the processing allowance and process size and tolerance of each process.
5, select machine tools and workers, clips, quantities, cutting tools. The selection of mechanical equipment should not only ensure the quality of processing, but also be economical and reasonable. Under the conditions of mass production, general machine tools and special jigs should generally be used.
6, Determine the technical requirements and inspection methods of each major process.Determining the cutting amount and time quota of each process is usually decided by the operator for a single small batch production plant. It is generally not specified in the machining process card. However, in the medium batch and mass production plants, in order to ensure the rationality of production and the balance of rhythm, it is required that the cutting amount must be specified, and must not be changed at will.
cnc machining process arrangement
First rough and then fine
The processing accuracy is gradually improved according to the order of rough turning - semi-fine turning - fine turning. The rough lathe can remove most of the machining allowance of the workpiece surface in a short time, thereby increasing the metal removal rate and meeting the requirement of the uniformity of the allowance. If the residual amount left after the rough turning does not meet the finishing requirements, it is necessary to arrange a semi-finishing car for finishing. The fine car needs to ensure that the outline of the part is cut according to the drawing size to ensure the processing accuracy.
Approach first and then far
Under normal circumstances, the parts close to the tool should be processed first, and then the parts far away from the tool to the tool should be processed to shorten the moving distance of the tool and reduce the empty travel time. In the process of turning, it is beneficial to maintain the stiffness of the blank or semi-finished product and improve its cutting conditions.
The principle of internal and external intersection
For parts that have both an inner surface (inner cavity) and an outer surface to be processed, when arranging the processing sequence, the inner and outer surfaces should be roughed first, and then the inner and outer surfaces should be finished. Must not be part of the surface of the part (outer surface or inner surface) after processing, then processing other surfaces (inner surface or outer surface).
Base first principle
Priority should be given to the surface used as the finishing reference. This is because the more accurate the surface of the positioning reference, the smaller the clamping error. For example, when machining shaft parts, the center hole is usually machined first, and then the outer surface and end face are machined with the center hole as the precision basis.
The principle of the first and the second
The main working surface and assembly base surface of the parts should be processed first, so as to find out the modern defects on the main surface in the blank early. The secondary surface can be interspersed, placed on the main machined surface to a certain extent, before the final finishing.
The principle of the face before the hole
The plane outline size of the box and bracket parts is large, and the plane is generally processed first, and then the hole and other sizes are processed. This arrangement of processing sequence, on the one hand with the processed plane positioning, stable and reliable; On the other hand, it is easy to process the hole on the machined plane, and can improve the processing accuracy of the hole, especially when drilling, the axis of the hole is not easy to deviate.
Conclusion
When developing the machining process of parts, it is necessary to select the appropriate processing method, machine tool equipment, clamp measuring tools, blank and technical requirements for workers according to the production type of parts.
Comparative detection of automobile lamps with three-dimensional scanner
one Industry status
The customer's product is the car lamp. It is difficult to scan the lamp. Because many places on the lamp are transparent, and the laser of the scanner is transparent, it is difficult to scan.
two Limitations of customers' current testing methods
For this car lamp, the customer doesn't have any effective measurement means, and then the customer comes to us. We use hscan handheld 3D laser scanner to help them scan and measure. During the scanning process, we will spray white powder on the transparent part of the object, and through processing, present the data required by the customer completely, and submit the comparison results to the customer.
Firstly, quickly paste the positioning mark point on the scanned air conditioner, spray the lamp with white powder, and then scan the tested part as a whole through non-contact three-dimensional laser scanning, and carefully scan the details. Finally, compare and adjust the obtained data, and make a test report.
two Required instrument and model
Hscan handheld 3D laser scanner Prince series.
three Scanner working hours
It takes 2 minutes to paste the marked points;
Data post-processing and comparison report for ten minutes.
1 scan data
For this kind of car lamp, the hand-held three-dimensional laser scanner has incomparable advantages: first, the point non-contact scanning has no limit on the size of the measured workpiece; Secondly, hand-held scanning, the workpiece does not need to be fixed, and there is no need to specially design the detection fixture, so it can be inspected on arrival. By using our three-dimensional scanner, customers shorten the detection cycle and reduce the detection cost.
Reverse / comparative product display
lw
one Industry status
The customer's product is the car lamp. It is difficult to scan the lamp. Because many places on the lamp are transparent, and the laser of the scanner is transparent, it is difficult to scan.
two Limitations of customers' current testing methods
For this car lamp, the customer doesn't have any effective measurement means, and then the customer comes to us. We use hscan handheld 3D laser scanner to help them scan and measure. During the scanning process, we will spray white powder on the transparent part of the object, and through processing, present the data required by the customer completely, and submit the comparison results to the customer.
Firstly, quickly paste the positioning mark point on the scanned air conditioner, spray the lamp with white powder, and then scan the tested part as a whole through non-contact three-dimensional laser scanning, and carefully scan the details. Finally, compare and adjust the obtained data, and make a test report.
two Required instrument and model
Hscan handheld 3D laser scanner Prince series.
three Scanner working hours
It takes 2 minutes to paste the marked points;
Data post-processing and comparison report for ten minutes.
1 scan data
For this kind of car lamp, the hand-held three-dimensional laser scanner has incomparable advantages: first, the point non-contact scanning has no limit on the size of the measured workpiece; Secondly, hand-held scanning, the workpiece does not need to be fixed, and there is no need to specially design the detection fixture, so it can be inspected on arrival. By using our three-dimensional scanner, customers shorten the detection cycle and reduce the detection cost.
Reverse / comparative product display
lw
PETALING JAYA: Low-profile Datuk Gan Kim Huat is consolidating his businesses in two listed companies, SKP Resources Bhd and Tecnic Group Bhd, in a move that will pave the way for the establishment of a major plastic parts manufacturer.
Yesterday, the share prices of SKP and Tecnic climbed to all-time highs of 71 sen and RM5.08, respectively, before both stocks were suspended, "pending a material announcement".
It is learnt that the merger and acquisition exercise could involve cash and the issuance of new SKP shares.
Gan and his family own about 67% in SKP and 69% in Tecnic, formerly known as STS Tecnic Bhd.
"It's a move that the Gan family has been looking at for some time to create an entity with economies of scale. A merger can be synergistic for the two companies, which can lead to accretive earnings going forward," said a source.
SKP, which has been on expansion mode over the past few years, is in the business of manufacturing plastic parts and components, contract manufacturing, precision mould making, the sub-assembly of electronic and electrical equipment and other secondary processes.
For the financial year ended March 31, 2013 (FY13), British electrical appliance brand Dyson contributed 55% to SKP's total sales.
According to SKP's website, its other clients include Hewlett-Packard, Sharp, Flextronics and Pioneer.
Tecnic, meanwhile, is involved in plastic moulding design and fabrication, plastic injection and blow moulding for the automotive, electrical and electronic sectors as well as industrial consumable products. It counts Valeo, Sharp, Panasonic, Denso, Suzuki, Proton and Perodua as its clients.
SKP and Tecnic had cash and cash equivalents of RM19.4mil and RM25.7mil, respectively, as at June 30. However, SKP has seen a higher trading volume in recent months, while Tecnic is a relatively tightly held stock.
In an earlier note, RHB Research said SKP could achieve a two-year earnings compounded annual growth rate of 57.9% on the back of a 75% expansion in capacity to cater to increasing orders from Dyson.
SKP has a new plant in Senai, Johor, which is slated for completion next month and achieve full-scale operations by FY17, Kenanga Research said in a separate report.
The research house noted that SKP's stronger order-book, underpinned by orders from Dyson to manufacture two new product lines for vacuum cleaners and fans, will provide earnings visibility for the next few years.
"The new products are next-generation appliances that will be able to fetch higher margins and contribute to the group's earnings. We understand that a major part of the group's new plant will cater to the production of the two new products," it added.
SKP jumped 10.5 sen to 71 sen, with 38.37 million shares being traded.
Tecnic rose 31 sen, or 6.5%, to RM5.08, with 219,500 shares changing hands.
Yesterday, the share prices of SKP and Tecnic climbed to all-time highs of 71 sen and RM5.08, respectively, before both stocks were suspended, "pending a material announcement".
It is learnt that the merger and acquisition exercise could involve cash and the issuance of new SKP shares.
Gan and his family own about 67% in SKP and 69% in Tecnic, formerly known as STS Tecnic Bhd.
"It's a move that the Gan family has been looking at for some time to create an entity with economies of scale. A merger can be synergistic for the two companies, which can lead to accretive earnings going forward," said a source.
SKP, which has been on expansion mode over the past few years, is in the business of manufacturing plastic parts and components, contract manufacturing, precision mould making, the sub-assembly of electronic and electrical equipment and other secondary processes.
For the financial year ended March 31, 2013 (FY13), British electrical appliance brand Dyson contributed 55% to SKP's total sales.
According to SKP's website, its other clients include Hewlett-Packard, Sharp, Flextronics and Pioneer.
Tecnic, meanwhile, is involved in plastic moulding design and fabrication, plastic injection and blow moulding for the automotive, electrical and electronic sectors as well as industrial consumable products. It counts Valeo, Sharp, Panasonic, Denso, Suzuki, Proton and Perodua as its clients.
SKP and Tecnic had cash and cash equivalents of RM19.4mil and RM25.7mil, respectively, as at June 30. However, SKP has seen a higher trading volume in recent months, while Tecnic is a relatively tightly held stock.
In an earlier note, RHB Research said SKP could achieve a two-year earnings compounded annual growth rate of 57.9% on the back of a 75% expansion in capacity to cater to increasing orders from Dyson.
SKP has a new plant in Senai, Johor, which is slated for completion next month and achieve full-scale operations by FY17, Kenanga Research said in a separate report.
The research house noted that SKP's stronger order-book, underpinned by orders from Dyson to manufacture two new product lines for vacuum cleaners and fans, will provide earnings visibility for the next few years.
"The new products are next-generation appliances that will be able to fetch higher margins and contribute to the group's earnings. We understand that a major part of the group's new plant will cater to the production of the two new products," it added.
SKP jumped 10.5 sen to 71 sen, with 38.37 million shares being traded.
Tecnic rose 31 sen, or 6.5%, to RM5.08, with 219,500 shares changing hands.
The processing methods of holes include drilling, reaming, reaming, boring, drawing, grinding and finishing of holes. The following small series for you to introduce several hole processing technology in detail, crack the hole processing problems.
The hole is an important surface on the box, bracket, sleeve, ring, and disk parts, and it is also a surface often encountered in machining. In the case of the same processing accuracy and surface roughness requirements, it is difficult to process the hole than the outer round surface, low productivity and high cost.
This is because: 1) the size of the tool used in hole processing is limited by the size of the hole being processed, and the rigidity is poor, which is easy to produce bending deformation and vibration; 2) When machining the hole with a fixed-size tool, the size of the hole processing often directly depends on the corresponding size of the tool, and the manufacturing error and wear of the tool will directly affect the processing accuracy of the hole; 3) When machining holes, the cutting area is inside the workpiece, the chip removal and heat dissipation conditions are poor, and the processing accuracy and surface quality are not easy to control.
Drilling and reaming
Drilling
Drilling is the first process of machining holes on solid materials, and the diameter of the drilling hole is generally less than 80mm. There are two ways of drilling: one is the bit rotation; The other is workpiece rotation. The error generated by the above two drilling methods is not the same, in the drilling method of the bit rotation, due to the asymmetry of the cutting edge and the insufficient rigidity of the bit and the bit deflection, the center line of the hole will be skewed or not straight, but the aperture is basically unchanged; On the contrary, in the drilling method of workpiece rotation, the bit deflection will cause the aperture to change, but the center line of the hole is still straight.
Commonly used drilling knives have: twist drill, center drill, deep hole drill, etc., of which the most commonly used is twist drill, its diameter specification is Φ0.1-80mm.
Due to structural limitations, the bending stiffness and torsional rigidity of the drill bit are low, coupled with poor centering, the drilling accuracy is low, generally only IT13 ~ IT11; The surface roughness is also large, Ra is generally 50~12.5μm; However, the metal removal rate of drilling is large and the cutting efficiency is high. Drilling is mainly used for processing holes with low quality requirements, such as bolt holes, thread bottom holes, oil holes, etc. For holes with high machining accuracy and surface quality requirements, they should be achieved by reaming, reaming, boring or grinding in subsequent processing.
Reaming
Reaming is to further process the hole that has been drilled, cast or forged with a reaming drill to enlarge the aperture and improve the processing quality of the hole. Reaming can be used either as a pre-processing before finishing the hole or as the final processing of the hole with low requirements. Reaming drill is similar to twist drill, but has more teeth and no cross edge.
Compared with drilling, reaming has the following characteristics:
(1) the number of reaming drill teeth (3~8 teeth), good guidance, cutting is relatively stable; (2) reaming drill without cross edge, cutting conditions are good;
(3) The processing allowance is small, the chip sink can be made shallower, the drill core can be made thicker, and the tool body strength and rigidity are better. The precision of reaming is generally IT11~IT10, and the surface roughness Ra is 12.5~6.3μm. Reaming is often used to process holes with smaller diameters. When drilling a large diameter hole (D ≥30mm), often use a small drill bit (diameter of 0.5 to 0.7 times of the aperture) to pre-drill, and then use the corresponding size of the hole reaming drill, which can improve the processing quality and production efficiency of the hole.
In addition to processing cylindrical holes, reaming drills of various special shapes (also known as countersinks) can be used to process various countersunk seat holes and countersinks. The front face of the countersink is often equipped with a guide post, guided by a machined hole.
Reaming
Reaming is one of the finishing methods of holes, which is widely used in production. For smaller holes, reaming is a more economical and practical machining method than internal grinding and fine boring.
1. Reamer
Reamer is generally divided into two kinds of hand reamer and machine reamer. The handle part of the hand reamer is straight handle, the working part is longer, and the guiding function is better. The hand reamer has two kinds of structures: integral and adjustable outside diameter. The machine reamer has two kinds of structure with handle and sleeve. The reamer can not only process round holes, but also taper reamer can process taper holes.
2. Reaming process and its application
Reaming allowance has a great influence on the quality of reaming, the allowance is too large, the load of the reamer is large, the cutting edge is soon blunted, it is not easy to obtain a smooth machining surface, and the dimensional tolerance is not easy to guarantee; The margin is too small to remove the knife marks left by the previous process, and naturally there is no role in improving the quality of hole processing. Generally, the margin of coarse hinge is 0.35~0.15mm, and the fine hinge is 01.5~0.05mm.
To avoid chip nodules, reaming is usually processed at a lower cutting speed (v <8m/min for steel and cast iron with HSS reamers). The value of feed is related to the aperture to be machined, the larger the aperture, the larger the feed value, the feed rate of high-speed steel reamer processing steel and cast iron is usually 0.3~1mm/r.
Reaming must be cooled, lubricated and cleaned with appropriate cutting fluid to prevent chip buildup and remove chips in time. Compared with grinding and boring, the reaming productivity is higher and the accuracy of the hole is easily guaranteed. However, reaming can not correct the position error of the hole axis, and the position accuracy of the hole should be guaranteed by the previous process. Reaming is not suitable for processing step holes and blind holes.
The dimensional accuracy of reaming is generally IT9 ~ IT7, and the surface roughness Ra is generally 3.2~ 0.8μm. For medium-size holes with high precision requirements (such as IT7 precision holes), the driller - reamer - reamer process is a typical processing scheme commonly used in production.
Boring
Boring is a machining method in which the prefabricated hole is enlarged with a cutting tool. The boring work can be carried out either on the boring machine or on the lathe.
1. Boring method
There are three different machining methods for boring.
(1) The workpiece rotates and the tool makes feed movement
Boring on the lathe mostly belongs to this boring method. The characteristics of the process are: the axis line of the hole after processing is consistent with the rotation axis of the workpiece, the roundness of the hole mainly depends on the rotation accuracy of the machine tool spindle, and the axial geometry error of the hole mainly depends on the position accuracy of the tool feed direction relative to the rotation axis of the workpiece. This boring method is suitable for machining holes with coaxial requirements on the surface of the outer circle.
(2) The tool rotates and the workpiece is fed
The boring machine spindle drives the boring tool to rotate, and the table drives the workpiece to feed.
(3) The tool rotates and makes feed motion
Using this kind of boring boring method, the overhanging length of the boring bar is changed, the force deformation of the boring bar is also changed, the aperture near the headstock is large, and the aperture away from the headstock is small, forming a cone hole. In addition, with the increase of the overhang length of the boring bar, the bending deformation of the main shaft caused by its own weight also increases, and the axis of the machined hole will have a corresponding bending. This boring method is only suitable for machining short holes.
2. Diamond boring
Compared with general boring, diamond boring is characterized by a small amount of back cutting, small feed, high cutting speed, it can obtain a high processing accuracy (IT7 ~ IT6) and a very smooth surface (Ra is 0.4~ 0.05μm). Diamond boring was originally processed with diamond boring tools, and is now commonly processed with cemented carbide, CBN and artificial diamond tools. Mainly used for processing non-ferrous metal workpieces, can also be used for processing cast iron and steel parts.
The commonly used cutting parameters of diamond boring are: pre-boring of 0.2~0.6mm and final boring of 0.1mm; The feed rate is 0.01~0.14mm/r; The cutting speed is 100~250m/min when processing cast iron, 150~300m/min when processing steel, and 300~2000m/min when processing non-ferrous metals.
In order to ensure that the diamond boring machine can achieve high machining accuracy and surface quality, the machine tool (diamond boring machine) must have high geometric accuracy and stiffness, the main shaft of the machine tool supports the commonly used precision angular contact ball bearing or static pressure plain bearing, and the high-speed rotating parts must be accurately balanced; In addition, the movement of the feed mechanism must be very smooth to ensure that the table can do smooth low-speed feed movement.
The machining quality of diamond boring is good, the production efficiency is high, and it is widely used in the final processing of precision holes in a large number of mass production, such as the engine cylinder hole, the piston pin hole, the main shaft hole on the spindle box of the machine tool. However, it should be noted that when machining ferrous metal products with diamond boring, only the boring tool made of cemented carbide and CBN can be used, and the boring tool made of diamond can not be used, because the carbon atoms in diamond have a large affinity with the iron group elements, and the tool life is low.
3. Boring tool
Boring tool can be divided into single-edge boring tool and double-edge boring tool.
4. Boring process characteristics and application range
Compared with the drilling, expanding and reaming process, the bore size is not limited by the tool size, and the boring has a strong error correction ability, and the deviation error of the original hole axis can be corrected by multiple cutting, and the boring can maintain a higher position accuracy with the positioning surface.
Compared with the outer circle of the boring, due to the poor rigidity of the tool bar system, large deformation, poor heat dissipation and chip removal conditions, the hot deformation of the workpiece and the tool is relatively large, and the processing quality and production efficiency of the boring are not as high as the outer circle of the car.
In summary, it can be seen that the processing range of boring is wide, and holes of different sizes and different precision levels can be processed. For holes and hole systems with large aperture, high size and position accuracy requirements, boring is almost the only processing method. The machining accuracy of boring is IT9 ~ IT7. Boring can be carried out on the boring machine, lathe, milling machine and other machine tools, which has the advantages of flexibility and flexibility, and is widely used in production. In mass production, boring die is often used to improve boring efficiency.
Honing hole
1. Honing principle and honing head
Honing is the method of finishing the hole by using a honing head with a grinding rod (whetstone). When honing, the workpiece is fixed, and the honing head is rotated by the spindle of the machine tool and moves in a reciprocating straight line. In honing processing, the grinding strip acts on the workpiece surface with a certain pressure, and cuts an extremely thin layer of material from the workpiece surface. In order to make the movement of the abrasive particle not repeat, the number of revolutions per minute of the turning movement of the honing head and the number of reciprocating strokes per minute of the honing head should be prime.
The cross Angle of the honing track is related to the reciprocating speed and circular speed of the honing head, and the size of the Angle affects the processing quality and efficiency of the honing. In order to facilitate the discharge of broken abrasive particles and chips, reduce the cutting temperature and improve the processing quality, sufficient cutting fluid should be used when honing.
In order to make the machined hole wall can be uniformly machined, the stroke of the sand bar at both ends of the hole must exceed a section of overpass. In order to ensure the uniform honing allowance and reduce the influence of the spindle rotation error on the machining accuracy, the floating connection between the honing head and the spindle of the machine tool is mostly adopted.
The radial expansion adjustment of honing head grinding rod has various structural forms such as manual, pneumatic and hydraulic.
2. Honing process characteristics and application range
(1) honing can obtain higher dimensional accuracy and shape accuracy, the processing accuracy is IT7~IT6, the roundness and cylindricity error of the hole can be controlled within the range, but honing can not improve the position accuracy of the hole to be machined.
(2) Honing can obtain a higher surface quality, the surface roughness Ra is 0.2~0.25μm, the surface metal metamorphic defect layer depth is very small 2.5~25μm.
(3) Compared with the grinding speed, the circular speed of the honing head is not high (vc=16~60m/min), but due to the large contact area between the sand bar and the workpiece, the reciprocating speed is relatively high (va=8~20m/min), so the honing still has a high productivity.
Honing is widely used in the machining of engine cylinder holes and precision holes in various hydraulic devices in a large number of mass production, and can process deep holes with a length-diameter ratio greater than 10. However, honing is not suitable for processing holes on non-ferrous metal workpieces with large plasticity, nor can it process holes with keyways, spline holes, etc.
Lacon
1. Broach and broach
Drawing is a high productivity finishing method, which is carried out on a broaching machine with a special broach. Broaching machine divided into horizontal broaching machine and vertical broaching machine two kinds, the horizontal broaching machine is the most common.
Broaching only uses low-speed linear motion (main motion). The number of teeth of the broach working at the same time should generally be not less than 3, otherwise the broach is not stable, and it is easy to produce ring ripples on the surface of the workpiece. In order to avoid generating too much broaching force and causing the broach to break, the number of teeth of the broach working at the same time should not exceed 6 to 8.
There are three different broaching methods, which are described as follows:
(1) Layered broaching
This broaching method is characterized by the broach cutting the workpiece machining allowance layer by layer in sequence. In order to facilitate chip breaking, the cutter teeth are ground with interleaved chip grooves. The broach designed according to the layered broaching method is called the ordinary broach.
(2) block broaching
The characteristic of this broaching method is that each layer of metal on the machined surface is cut by a set of tool teeth that are basically the same size but interlaced with each other (usually each set consists of 2-3 tool teeth). Each tooth cuts only part of a layer of metal. Broach designed according to the block broach method is called rotary broach.
(3) Comprehensive broaching
In this way, the advantages of layering and block broaching are concentrated. Block broaching is used in the rough cutting part and layer broaching is used in the fine cutting part. In this way, the broach length can be shortened, productivity can be increased, and better surface quality can be obtained. The broach designed according to the comprehensive broach method is called the comprehensive broach.
2. Process characteristics and application range of drawing holes
(1) The broach is a multi-edge tool, which can finish the roughing, finishing and finishing of the hole in a sequence in one broaching stroke, and has high production efficiency.
(2) The drawing accuracy mainly depends on the accuracy of the broach, under normal conditions, the drawing accuracy can reach IT9~IT7, and the surface roughness Ra can reach 6.3~ 1.6μm.
(3) When drawing a hole, the workpiece is positioned by the machined hole itself (the leading part of the broach is the positioning element of the workpiece), and the drawing hole is not easy to ensure the mutual position accuracy of the hole and other surfaces; For the processing of rotary parts whose inner and outer circular surfaces have coaxial requirements, it is often necessary to first pull holes, and then process other surfaces with holes as the positioning reference.
(4) broach can not only process round holes, but also process forming holes and spline holes.
(5) broach is a fixed size tool, complex shape, expensive, not suitable for processing large holes.
Drawing holes are commonly used in a large number of mass production to process holes on small and medium-sized parts with a diameter of 10~80mm and a hole depth of not more than 5 times the aperture.
Honscn Precision Technology Co., LTD., offering a wide range of machining processes, including hardware parts foundry, precision hardware parts, turret turning and milling complex machining, and core walking complex machining.Our products are widely used in automobiles, motorcycles, communications, refrigeration, optics, home appliances, micro electronics, measuring tools, fishing gear, instruments, electronics and other professional fields to meet their parts needs.Contact us
The hole is an important surface on the box, bracket, sleeve, ring, and disk parts, and it is also a surface often encountered in machining. In the case of the same processing accuracy and surface roughness requirements, it is difficult to process the hole than the outer round surface, low productivity and high cost.
This is because: 1) the size of the tool used in hole processing is limited by the size of the hole being processed, and the rigidity is poor, which is easy to produce bending deformation and vibration; 2) When machining the hole with a fixed-size tool, the size of the hole processing often directly depends on the corresponding size of the tool, and the manufacturing error and wear of the tool will directly affect the processing accuracy of the hole; 3) When machining holes, the cutting area is inside the workpiece, the chip removal and heat dissipation conditions are poor, and the processing accuracy and surface quality are not easy to control.
Drilling and reaming
Drilling
Drilling is the first process of machining holes on solid materials, and the diameter of the drilling hole is generally less than 80mm. There are two ways of drilling: one is the bit rotation; The other is workpiece rotation. The error generated by the above two drilling methods is not the same, in the drilling method of the bit rotation, due to the asymmetry of the cutting edge and the insufficient rigidity of the bit and the bit deflection, the center line of the hole will be skewed or not straight, but the aperture is basically unchanged; On the contrary, in the drilling method of workpiece rotation, the bit deflection will cause the aperture to change, but the center line of the hole is still straight.
Commonly used drilling knives have: twist drill, center drill, deep hole drill, etc., of which the most commonly used is twist drill, its diameter specification is Φ0.1-80mm.
Due to structural limitations, the bending stiffness and torsional rigidity of the drill bit are low, coupled with poor centering, the drilling accuracy is low, generally only IT13 ~ IT11; The surface roughness is also large, Ra is generally 50~12.5μm; However, the metal removal rate of drilling is large and the cutting efficiency is high. Drilling is mainly used for processing holes with low quality requirements, such as bolt holes, thread bottom holes, oil holes, etc. For holes with high machining accuracy and surface quality requirements, they should be achieved by reaming, reaming, boring or grinding in subsequent processing.
Reaming
Reaming is to further process the hole that has been drilled, cast or forged with a reaming drill to enlarge the aperture and improve the processing quality of the hole. Reaming can be used either as a pre-processing before finishing the hole or as the final processing of the hole with low requirements. Reaming drill is similar to twist drill, but has more teeth and no cross edge.
Compared with drilling, reaming has the following characteristics:
(1) the number of reaming drill teeth (3~8 teeth), good guidance, cutting is relatively stable; (2) reaming drill without cross edge, cutting conditions are good;
(3) The processing allowance is small, the chip sink can be made shallower, the drill core can be made thicker, and the tool body strength and rigidity are better. The precision of reaming is generally IT11~IT10, and the surface roughness Ra is 12.5~6.3μm. Reaming is often used to process holes with smaller diameters. When drilling a large diameter hole (D ≥30mm), often use a small drill bit (diameter of 0.5 to 0.7 times of the aperture) to pre-drill, and then use the corresponding size of the hole reaming drill, which can improve the processing quality and production efficiency of the hole.
In addition to processing cylindrical holes, reaming drills of various special shapes (also known as countersinks) can be used to process various countersunk seat holes and countersinks. The front face of the countersink is often equipped with a guide post, guided by a machined hole.
Reaming
Reaming is one of the finishing methods of holes, which is widely used in production. For smaller holes, reaming is a more economical and practical machining method than internal grinding and fine boring.
1. Reamer
Reamer is generally divided into two kinds of hand reamer and machine reamer. The handle part of the hand reamer is straight handle, the working part is longer, and the guiding function is better. The hand reamer has two kinds of structures: integral and adjustable outside diameter. The machine reamer has two kinds of structure with handle and sleeve. The reamer can not only process round holes, but also taper reamer can process taper holes.
2. Reaming process and its application
Reaming allowance has a great influence on the quality of reaming, the allowance is too large, the load of the reamer is large, the cutting edge is soon blunted, it is not easy to obtain a smooth machining surface, and the dimensional tolerance is not easy to guarantee; The margin is too small to remove the knife marks left by the previous process, and naturally there is no role in improving the quality of hole processing. Generally, the margin of coarse hinge is 0.35~0.15mm, and the fine hinge is 01.5~0.05mm.
To avoid chip nodules, reaming is usually processed at a lower cutting speed (v <8m/min for steel and cast iron with HSS reamers). The value of feed is related to the aperture to be machined, the larger the aperture, the larger the feed value, the feed rate of high-speed steel reamer processing steel and cast iron is usually 0.3~1mm/r.
Reaming must be cooled, lubricated and cleaned with appropriate cutting fluid to prevent chip buildup and remove chips in time. Compared with grinding and boring, the reaming productivity is higher and the accuracy of the hole is easily guaranteed. However, reaming can not correct the position error of the hole axis, and the position accuracy of the hole should be guaranteed by the previous process. Reaming is not suitable for processing step holes and blind holes.
The dimensional accuracy of reaming is generally IT9 ~ IT7, and the surface roughness Ra is generally 3.2~ 0.8μm. For medium-size holes with high precision requirements (such as IT7 precision holes), the driller - reamer - reamer process is a typical processing scheme commonly used in production.
Boring
Boring is a machining method in which the prefabricated hole is enlarged with a cutting tool. The boring work can be carried out either on the boring machine or on the lathe.
1. Boring method
There are three different machining methods for boring.
(1) The workpiece rotates and the tool makes feed movement
Boring on the lathe mostly belongs to this boring method. The characteristics of the process are: the axis line of the hole after processing is consistent with the rotation axis of the workpiece, the roundness of the hole mainly depends on the rotation accuracy of the machine tool spindle, and the axial geometry error of the hole mainly depends on the position accuracy of the tool feed direction relative to the rotation axis of the workpiece. This boring method is suitable for machining holes with coaxial requirements on the surface of the outer circle.
(2) The tool rotates and the workpiece is fed
The boring machine spindle drives the boring tool to rotate, and the table drives the workpiece to feed.
(3) The tool rotates and makes feed motion
Using this kind of boring boring method, the overhanging length of the boring bar is changed, the force deformation of the boring bar is also changed, the aperture near the headstock is large, and the aperture away from the headstock is small, forming a cone hole. In addition, with the increase of the overhang length of the boring bar, the bending deformation of the main shaft caused by its own weight also increases, and the axis of the machined hole will have a corresponding bending. This boring method is only suitable for machining short holes.
2. Diamond boring
Compared with general boring, diamond boring is characterized by a small amount of back cutting, small feed, high cutting speed, it can obtain a high processing accuracy (IT7 ~ IT6) and a very smooth surface (Ra is 0.4~ 0.05μm). Diamond boring was originally processed with diamond boring tools, and is now commonly processed with cemented carbide, CBN and artificial diamond tools. Mainly used for processing non-ferrous metal workpieces, can also be used for processing cast iron and steel parts.
The commonly used cutting parameters of diamond boring are: pre-boring of 0.2~0.6mm and final boring of 0.1mm; The feed rate is 0.01~0.14mm/r; The cutting speed is 100~250m/min when processing cast iron, 150~300m/min when processing steel, and 300~2000m/min when processing non-ferrous metals.
In order to ensure that the diamond boring machine can achieve high machining accuracy and surface quality, the machine tool (diamond boring machine) must have high geometric accuracy and stiffness, the main shaft of the machine tool supports the commonly used precision angular contact ball bearing or static pressure plain bearing, and the high-speed rotating parts must be accurately balanced; In addition, the movement of the feed mechanism must be very smooth to ensure that the table can do smooth low-speed feed movement.
The machining quality of diamond boring is good, the production efficiency is high, and it is widely used in the final processing of precision holes in a large number of mass production, such as the engine cylinder hole, the piston pin hole, the main shaft hole on the spindle box of the machine tool. However, it should be noted that when machining ferrous metal products with diamond boring, only the boring tool made of cemented carbide and CBN can be used, and the boring tool made of diamond can not be used, because the carbon atoms in diamond have a large affinity with the iron group elements, and the tool life is low.
3. Boring tool
Boring tool can be divided into single-edge boring tool and double-edge boring tool.
4. Boring process characteristics and application range
Compared with the drilling, expanding and reaming process, the bore size is not limited by the tool size, and the boring has a strong error correction ability, and the deviation error of the original hole axis can be corrected by multiple cutting, and the boring can maintain a higher position accuracy with the positioning surface.
Compared with the outer circle of the boring, due to the poor rigidity of the tool bar system, large deformation, poor heat dissipation and chip removal conditions, the hot deformation of the workpiece and the tool is relatively large, and the processing quality and production efficiency of the boring are not as high as the outer circle of the car.
In summary, it can be seen that the processing range of boring is wide, and holes of different sizes and different precision levels can be processed. For holes and hole systems with large aperture, high size and position accuracy requirements, boring is almost the only processing method. The machining accuracy of boring is IT9 ~ IT7. Boring can be carried out on the boring machine, lathe, milling machine and other machine tools, which has the advantages of flexibility and flexibility, and is widely used in production. In mass production, boring die is often used to improve boring efficiency.
Honing hole
1. Honing principle and honing head
Honing is the method of finishing the hole by using a honing head with a grinding rod (whetstone). When honing, the workpiece is fixed, and the honing head is rotated by the spindle of the machine tool and moves in a reciprocating straight line. In honing processing, the grinding strip acts on the workpiece surface with a certain pressure, and cuts an extremely thin layer of material from the workpiece surface. In order to make the movement of the abrasive particle not repeat, the number of revolutions per minute of the turning movement of the honing head and the number of reciprocating strokes per minute of the honing head should be prime.
The cross Angle of the honing track is related to the reciprocating speed and circular speed of the honing head, and the size of the Angle affects the processing quality and efficiency of the honing. In order to facilitate the discharge of broken abrasive particles and chips, reduce the cutting temperature and improve the processing quality, sufficient cutting fluid should be used when honing.
In order to make the machined hole wall can be uniformly machined, the stroke of the sand bar at both ends of the hole must exceed a section of overpass. In order to ensure the uniform honing allowance and reduce the influence of the spindle rotation error on the machining accuracy, the floating connection between the honing head and the spindle of the machine tool is mostly adopted.
The radial expansion adjustment of honing head grinding rod has various structural forms such as manual, pneumatic and hydraulic.
2. Honing process characteristics and application range
(1) honing can obtain higher dimensional accuracy and shape accuracy, the processing accuracy is IT7~IT6, the roundness and cylindricity error of the hole can be controlled within the range, but honing can not improve the position accuracy of the hole to be machined.
(2) Honing can obtain a higher surface quality, the surface roughness Ra is 0.2~0.25μm, the surface metal metamorphic defect layer depth is very small 2.5~25μm.
(3) Compared with the grinding speed, the circular speed of the honing head is not high (vc=16~60m/min), but due to the large contact area between the sand bar and the workpiece, the reciprocating speed is relatively high (va=8~20m/min), so the honing still has a high productivity.
Honing is widely used in the machining of engine cylinder holes and precision holes in various hydraulic devices in a large number of mass production, and can process deep holes with a length-diameter ratio greater than 10. However, honing is not suitable for processing holes on non-ferrous metal workpieces with large plasticity, nor can it process holes with keyways, spline holes, etc.
Lacon
1. Broach and broach
Drawing is a high productivity finishing method, which is carried out on a broaching machine with a special broach. Broaching machine divided into horizontal broaching machine and vertical broaching machine two kinds, the horizontal broaching machine is the most common.
Broaching only uses low-speed linear motion (main motion). The number of teeth of the broach working at the same time should generally be not less than 3, otherwise the broach is not stable, and it is easy to produce ring ripples on the surface of the workpiece. In order to avoid generating too much broaching force and causing the broach to break, the number of teeth of the broach working at the same time should not exceed 6 to 8.
There are three different broaching methods, which are described as follows:
(1) Layered broaching
This broaching method is characterized by the broach cutting the workpiece machining allowance layer by layer in sequence. In order to facilitate chip breaking, the cutter teeth are ground with interleaved chip grooves. The broach designed according to the layered broaching method is called the ordinary broach.
(2) block broaching
The characteristic of this broaching method is that each layer of metal on the machined surface is cut by a set of tool teeth that are basically the same size but interlaced with each other (usually each set consists of 2-3 tool teeth). Each tooth cuts only part of a layer of metal. Broach designed according to the block broach method is called rotary broach.
(3) Comprehensive broaching
In this way, the advantages of layering and block broaching are concentrated. Block broaching is used in the rough cutting part and layer broaching is used in the fine cutting part. In this way, the broach length can be shortened, productivity can be increased, and better surface quality can be obtained. The broach designed according to the comprehensive broach method is called the comprehensive broach.
2. Process characteristics and application range of drawing holes
(1) The broach is a multi-edge tool, which can finish the roughing, finishing and finishing of the hole in a sequence in one broaching stroke, and has high production efficiency.
(2) The drawing accuracy mainly depends on the accuracy of the broach, under normal conditions, the drawing accuracy can reach IT9~IT7, and the surface roughness Ra can reach 6.3~ 1.6μm.
(3) When drawing a hole, the workpiece is positioned by the machined hole itself (the leading part of the broach is the positioning element of the workpiece), and the drawing hole is not easy to ensure the mutual position accuracy of the hole and other surfaces; For the processing of rotary parts whose inner and outer circular surfaces have coaxial requirements, it is often necessary to first pull holes, and then process other surfaces with holes as the positioning reference.
(4) broach can not only process round holes, but also process forming holes and spline holes.
(5) broach is a fixed size tool, complex shape, expensive, not suitable for processing large holes.
Drawing holes are commonly used in a large number of mass production to process holes on small and medium-sized parts with a diameter of 10~80mm and a hole depth of not more than 5 times the aperture.
Honscn Precision Technology Co., LTD., offering a wide range of machining processes, including hardware parts foundry, precision hardware parts, turret turning and milling complex machining, and core walking complex machining.Our products are widely used in automobiles, motorcycles, communications, refrigeration, optics, home appliances, micro electronics, measuring tools, fishing gear, instruments, electronics and other professional fields to meet their parts needs.Contact us
no data
more products
Send your inquiry
you might like
no data
Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
Copyright © 2025 HONSCN |Sitemap Privacy Policy