Cnc Machining Service: Things You May Want to Know
To make sure that Honscn Co.,Ltd provides quality cnc machining service, we have effective quality management methods that fully meet regulatory requirements. We strictly follow standard operating procedures for the selection of materials to ensure the high quality of the product. Meanwhile, we effectively implement the quality control system throughout the whole production process.
HONSCN insists on giving back to our loyal customers by providing cost-effective products. These products keep pace with the times and exceed similar products with constantly improved customer satisfaction. They are exported all over the world, enjoying a good reputation among targeted customers. With our continuous improvements in the products, our brand is recognized and trusted by customers.
At Honscn, we resort to handle customers' needs expertly through customization of cnc machining service. The fast response is guaranteed by our effort in staff training. We facilitate 24-hour service to answer customers' questions about MOQ, packaging, and delivery.
In the field of machining industry, the precision size control of drawings plays a vital role, which directly affects the assembly performance and quality of mechanical equipment. The main factor affecting the size of precision machining is the error problem, because the error problem is affected by a variety of factors, in the machine precision machining will inevitably appear a variety of error problems, so only the use of various technical measures, the precision control in a scientific range. This requires technical personnel to strictly process according to the production drawings, and strictly require the machining process flow, so as to ensure the accuracy of the size of the precision machining production drawings to the greatest extent.
Today, with the rapid development of social economy and industrial reform, the role played by precision machining has become more and more important, and China's machining industry has also made great progress, not only the quality has been greatly improved, but also greatly expanded in the scale of production. With the development of the industrialization process, the precision of precision machining is also more and more attention, therefore, it is necessary to strengthen the control of precision in the process of machining (precision machining process, the control of precision must be attached great importance, and take reasonable technical measures to solve the problems.
Content of machining and influencing factors
1
/
Understand the content of machining
In the field of mechanical processing in China, there is a clear definition of the accuracy of mechanical processing, which refers to the professional and technical personnel after the completion of the processing of mechanical parts, the use of instruments to detect the position of the parts, shape, size and related data, so as to determine the degree of compliance of the parts. Generally speaking, the main factor affecting the accuracy of machining is the various errors generated in machining, and the operators and technical units of technical processing must attach great importance to this problem. In machining, the control and grasp of precision are obviously related to the error problem of machining. Machining error is mainly reflected by the shape, size and position, it is through the use of mechanical size control to achieve the purpose of controlling the precision of machining, in ensuring the surface quality of machining, the machining size error control within a reasonable range. In the process of machining, due to the impact of the benchmark and the machining surface, it will cause the deviation of the position of the precision parts, so the verticality, position and parallelism of the precision machining must be strictly controlled.
2
/ Factors affecting precision machining accuracy
In the process of precision machining, there are strict requirements for various production technologies and production processes, so as to reduce or even eliminate the purpose of machining technology errors. In machining, the error between the spindle rotation is an important factor affecting the accuracy. In the process of modern mechanical production and processing, the error caused by the spindle rotation problem is very obvious, which is more obvious in high-tech and high-precision products, which is also an important factor affecting the processing. For the resulting error, the error can be reduced by processing and transforming the machinery. In addition, bearings with higher precision can also be used, which can also significantly reduce the resulting error.
In addition to the error caused by the spindle rotation, the error caused by the problem of the fixture and the tool can not be ignored. Due to the requirements of production, machining manufacturers will renovate the size, type and model of fixtures and tools to a certain extent, which will have a greater impact on the accuracy of machining. In the actual processing process, the size of the fixture and the tool are fixed, which makes it impossible to adjust the size of the fixture and the tool in the process of production and processing. This will cause a certain error flow in the mechanical processing when the technical parameters and the working environment change.
In addition, due to the process of using and installing fixtures and tools, the position of fixtures and tools will be changed, resulting in errors. Of course, the cutting force will also have a certain impact on the machining, resulting in the generation of errors, and ultimately the accuracy of the machining. Due to the influence of the external environment and temperature, the machined parts can easily affect the cutting force. The greater accuracy error is caused by the local change of the process system and the overall deformation. In the process of mechanical production and processing, if the change of the direction of the tightening degree and the insufficient stiffness of the parts are affected, the deformation of the machined parts will be caused, and the machining will produce a lot of errors, which will affect the precision control of the machining.
Technical measures to control machining accuracy
In the process of mechanical production and processing, the problem of processing accuracy must be strictly controlled, and the accuracy problem must be comprehensively considered, so the processing accuracy of each part must be greatly improved, so as to improve the accuracy of the entire mechanical equipment. In the process of machining, the original error plays an important role in ensuring the quality of machining. For mechanical components, it is necessary to classify them according to the requirements of relevant regulations, according to the material, type, model, size and use, and then develop a certain accuracy range, and control the precision error of the machined parts within this range. For the technical staff, it is necessary to determine a reasonable range of the error generated in the machining, and make reasonable adjustments to the fixture and the tool, so as to control the error within this reasonable range, and ultimately reduce the error of the part to the greatest extent. Only by controlling the errors in machining, can the precision control of machining be achieved to the maximum extent, so as to achieve the purpose of improving the precision of machining.
Compensating error method
Error compensation method refers to the use of processing means to achieve error compensation after the machining of mechanical parts, so as to achieve the purpose of reducing the error in the processing of parts. Compensation error method is a very important technical measure to solve the stiffness problem of the process. The main principle is to compensate the original error by creating a new error, so as to improve the precision control level in precision machining. Error compensation method is an important means to reduce the machining error, which has been widely used in practice at home and abroad. In domestic regulations, the original error is generally represented by a negative number, and the compensation error is specified as a positive number, so that when the original error and the compensation error are closer to zero, the smaller the machining error.
Of course, the methods of reducing errors and improving precision control are not only these two, but also the transfer error method is a more commonly used method of reducing errors. Therefore, in the actual production process, it is necessary to choose a reasonable method to reduce the error according to different situations, so as to achieve the best precision control and promote the continuous and stable development of precision machining.
Today, with the rapid development of social economy and industrial reform, the role played by precision machining has become more and more important, and China's machining industry has also made great progress, not only the quality has been greatly improved, but also greatly expanded in the scale of production. With the development of the industrialization process, the precision of precision machining is also more and more attention, therefore, it is necessary to strengthen the control of precision in the process of machining (precision machining process, the control of precision must be attached great importance, and take reasonable technical measures to solve the problems.
Content of machining and influencing factors
1
/
Understand the content of machining
In the field of mechanical processing in China, there is a clear definition of the accuracy of mechanical processing, which refers to the professional and technical personnel after the completion of the processing of mechanical parts, the use of instruments to detect the position of the parts, shape, size and related data, so as to determine the degree of compliance of the parts. Generally speaking, the main factor affecting the accuracy of machining is the various errors generated in machining, and the operators and technical units of technical processing must attach great importance to this problem. In machining, the control and grasp of precision are obviously related to the error problem of machining. Machining error is mainly reflected by the shape, size and position, it is through the use of mechanical size control to achieve the purpose of controlling the precision of machining, in ensuring the surface quality of machining, the machining size error control within a reasonable range. In the process of machining, due to the impact of the benchmark and the machining surface, it will cause the deviation of the position of the precision parts, so the verticality, position and parallelism of the precision machining must be strictly controlled.
2
/ Factors affecting precision machining accuracy
In the process of precision machining, there are strict requirements for various production technologies and production processes, so as to reduce or even eliminate the purpose of machining technology errors. In machining, the error between the spindle rotation is an important factor affecting the accuracy. In the process of modern mechanical production and processing, the error caused by the spindle rotation problem is very obvious, which is more obvious in high-tech and high-precision products, which is also an important factor affecting the processing. For the resulting error, the error can be reduced by processing and transforming the machinery. In addition, bearings with higher precision can also be used, which can also significantly reduce the resulting error.
In addition to the error caused by the spindle rotation, the error caused by the problem of the fixture and the tool can not be ignored. Due to the requirements of production, machining manufacturers will renovate the size, type and model of fixtures and tools to a certain extent, which will have a greater impact on the accuracy of machining. In the actual processing process, the size of the fixture and the tool are fixed, which makes it impossible to adjust the size of the fixture and the tool in the process of production and processing. This will cause a certain error flow in the mechanical processing when the technical parameters and the working environment change.
In addition, due to the process of using and installing fixtures and tools, the position of fixtures and tools will be changed, resulting in errors. Of course, the cutting force will also have a certain impact on the machining, resulting in the generation of errors, and ultimately the accuracy of the machining. Due to the influence of the external environment and temperature, the machined parts can easily affect the cutting force. The greater accuracy error is caused by the local change of the process system and the overall deformation. In the process of mechanical production and processing, if the change of the direction of the tightening degree and the insufficient stiffness of the parts are affected, the deformation of the machined parts will be caused, and the machining will produce a lot of errors, which will affect the precision control of the machining.
Technical measures to control machining accuracy
In the process of mechanical production and processing, the problem of processing accuracy must be strictly controlled, and the accuracy problem must be comprehensively considered, so the processing accuracy of each part must be greatly improved, so as to improve the accuracy of the entire mechanical equipment. In the process of machining, the original error plays an important role in ensuring the quality of machining. For mechanical components, it is necessary to classify them according to the requirements of relevant regulations, according to the material, type, model, size and use, and then develop a certain accuracy range, and control the precision error of the machined parts within this range. For the technical staff, it is necessary to determine a reasonable range of the error generated in the machining, and make reasonable adjustments to the fixture and the tool, so as to control the error within this reasonable range, and ultimately reduce the error of the part to the greatest extent. Only by controlling the errors in machining, can the precision control of machining be achieved to the maximum extent, so as to achieve the purpose of improving the precision of machining.
Compensating error method
Error compensation method refers to the use of processing means to achieve error compensation after the machining of mechanical parts, so as to achieve the purpose of reducing the error in the processing of parts. Compensation error method is a very important technical measure to solve the stiffness problem of the process. The main principle is to compensate the original error by creating a new error, so as to improve the precision control level in precision machining. Error compensation method is an important means to reduce the machining error, which has been widely used in practice at home and abroad. In domestic regulations, the original error is generally represented by a negative number, and the compensation error is specified as a positive number, so that when the original error and the compensation error are closer to zero, the smaller the machining error.
Of course, the methods of reducing errors and improving precision control are not only these two, but also the transfer error method is a more commonly used method of reducing errors. Therefore, in the actual production process, it is necessary to choose a reasonable method to reduce the error according to different situations, so as to achieve the best precision control and promote the continuous and stable development of precision machining.
With the increasingly updated processing technology, CNC machining has also undergone a lot of changes. Many experts pointed out that in the future, CNC will be the mainstream processing mode. In the CNC machining process, the tool is the most important, today, we will understand the CNC tool in detail.
CNC machining tool concept
A tool is a tool used for cutting in mechanical manufacturing. Generalized cutting tools include both cutting tools and abrasive tools. The vast majority of knives are used for machines, but there are also hand tools. Since the tools used in mechanical manufacturing are basically used to cut metal materials, the term "tool" is generally understood as a metal cutting tool. The cutting tools used for cutting wood are called woodworking tools.
CNC machining tool
Tool classification
Cutting tools can be divided into five categories according to the form of the workpiece machined surface.
Cutting tools for processing various outer surfaces, including cutting tools for processing various outer surfaces, including turning tools, planing knives, milling cutters, outer surface broach and file, etc.
Hole processing tools, including drill, reaming drill, boring cutter, milling cutter and internal surface broach, etc.
Thread processing tools, including tap, die, automatic opening thread cutting head, thread turning tool and thread milling cutter.
Gear processing tools, including hob, gear shaper cutter, shaving cutter, bevel gear processing tool, etc.
Cutting tools, including inserted circular saw blade, band saw, bow saw, cutting tool and saw blade milling cutter, etc.
In addition, there are combination tools.
Hole cutting tool
Tool structure
The structure of various tools is composed of a clamping part and a working part. The clamping part and working part of the overall structure of the tool are done on the tool body; The working part of the tool (the tooth or blade) is mounted on the tool body.
The clamping part of the tool has two kinds of holes and handles. The tool with hole relies on the inner hole set on the spindle or mandrel of the machine tool, and transmits the torsional torque with the help of the axial key or the end key, such as the cylindrical milling cutter and the sleeve face milling cutter.
The tool with the handle is usually rectangular handle, cylindrical handle and conical handle three kinds. Turning tools, planing tools, etc. are generally rectangular handles; The conical handle withstands the axial thrust with the taper and transmits the torque with the help of friction. Cylindrical shank is generally suitable for smaller twist drill, end mill and other tools, cutting with the help of the friction generated when clamping torque transfer. The shank of many tools with handles is made of low alloy steel, and the working part is made of high speed steel welded to each other.
The basic properties that the tool material should have
1. High hardness
The hardness of the tool material must be higher than the hardness of the workpiece material to be machined, which is the basic feature that the tool material should have.
2. Sufficient strength and toughness
The material of the cutting part of the tool must withstand great cutting force and impact force when cutting. The bending strength and impact toughness reflect the ability of tool material to resist brittle fracture and edge breakage.
3. High wear resistance and heat resistance
The wear resistance of tool materials refers to the ability to resist wear. The higher the hardness of the tool material, the better the wear resistance; The higher the high temperature hardness, the better the heat resistance, the tool material at high temperature resistance to plastic deformation, anti-wear ability is also stronger.
4. Good thermal conductivity
Large thermal conductivity means good thermal conductivity, and the heat capacity generated during cutting is easily transmitted out, thereby reducing the temperature of the cutting part and reducing tool wear.
5. Good technology and economy
In order to facilitate manufacturing, the tool material is required to have good machinability, including forging, welding, cutting, heat treatment, grindability and so on. Economy is one of the important indexes to evaluate and promote the application of new tool materials.
6. Resistance to bonding
Prevent the workpiece and the tool material molecules under the action of high temperature and high pressure adsorption bond.
7. Chemical stability
It means that the tool material is not easy to react chemically with the surrounding medium at high temperature.
Tool coating
Aluminum alloy indexable inserts are now coated with hard or composite layers of titanium carbide, titanium nitride, alumina by chemical vapor deposition. The physical vapor deposition method that is being developed can be used not only for aluminum alloy tools, but also for high-speed steel tools such as drills, hobs, taps and milling cutters. As a barrier that prevents chemical diffusion and heat conduction, the hard coating slows down the wear rate of the tool during cutting, and the life of the coated blade is about 1 to 3 times higher than that of the uncoated blade.
How to choose a tool
Tool selection is carried out in the human-machine interaction state of NC programming. The tool and handle should be correctly selected according to the machining capacity of the machine tool, the performance of the workpiece material, the processing procedure, the cutting amount and other relevant factors.
The general principle of tool selection: easy installation and adjustment, good rigidity, high durability and accuracy. On the premise of meeting the processing requirements, try to choose a shorter tool handle to improve the rigidity of the tool processing. When selecting the tool, the size of the tool should be adapted to the surface size of the workpiece to be machined.
1. End milling cutter is often used to process the peripheral outline of plane parts.
2. When milling the plane, carbide blade milling cutter should be selected.
3. When processing convex and grooves, choose high-speed steel end milling cutter.
4. When processing the blank surface or roughing the hole, you can choose the corn milling cutter with cemented carbide blade.
5. For the processing of some vertical surface and variable bevel contour, ball end milling cutter, ring milling cutter, conical milling cutter and disk milling cutter are often used.
6. In the processing of free-form surface, because the cutting speed of the end of the ball head tool is zero, so in order to ensure the processing accuracy, the cutting line spacing is generally very dense, so the ball head is often used in the finishing of the surface.
7, flat head tool in the surface processing quality and cutting efficiency are better than the ball head knife, therefore, as long as the premise of ensuring but cutting, whether it is rough surface machining or finishing, should be preferred to choose flat head knife.
8. In the machining center, various tools are installed on the tool library, and the tool selection and tool change are carried out at any time according to the procedure. Therefore, the standard tool handle must be used in order to make the standard tool for drilling, boring, expanding, milling and other processes quickly and accurately installed on the machine spindle or tool library. The number of tools should be reduced as far as possible; After a tool is installed, it should complete all the processing parts that it can carry out; Rough finishing tools should be used separately, even if the same size specifications of the tool; Milling before drilling; Surface finishing is carried out first, and then 2D contour finishing is carried out. Where possible, the automatic tool change function of CNC machine tools should be used as much as possible to improve production efficiency.
Problems encountered in processing aluminum and solutions
Problems encountered in processing aluminum and solutions when processing pure aluminum, easy to stick knife analysis and solutions:
1. Aluminum material is soft in texture and easy to stick at high temperature;
2. Aluminum is not resistant to high temperature, easy to open;
3. Related to processing cutting fluid: good oil lubrication performance; Good water-soluble cooling performance; High dry cutting cost;
4. When processing pure aluminum, the end mill dedicated to aluminum processing should be selected: positive front Angle, sharp cutting edge, large chip discharge slot, 45 degrees or 55 degrees helix Angle;
5. The material of the workpiece and the CNC tool has a greater affinity.
6. Rough front tool processing soft materials.
Recommendation: Machine tool conditions are poor to good requirements are low to high, please use high-speed steel, coated polished carbide, PCD polycrystalline diamond and single crystal diamond.
7. Low speed can be avoided by cutting fluid, high speed oil mist lubrication, the effect can be improved, aluminum alloy suitable
Tool future development direction
Due to the high temperature, high pressure, high speed, and the parts working in the corrosive fluid medium, the application of difficult to process more and more materials, the automation level of cutting processing and the processing accuracy requirements are getting higher and higher. In order to adapt to this situation, the development direction of the tool will be the development and application of new tool materials; Further develop the vapor deposition coating technology of the tool, and deposit higher hardness coating on the matrix of high toughness and high strength, so as to better solve the contradiction between hardness and strength of the tool material; Further development of indexable tool structure; Improve the manufacturing accuracy of the tool, reduce the difference in product quality, and optimize the use of the tool.How to choose CNC aluminum alloy machining tool.
CNC machining tool concept
A tool is a tool used for cutting in mechanical manufacturing. Generalized cutting tools include both cutting tools and abrasive tools. The vast majority of knives are used for machines, but there are also hand tools. Since the tools used in mechanical manufacturing are basically used to cut metal materials, the term "tool" is generally understood as a metal cutting tool. The cutting tools used for cutting wood are called woodworking tools.
CNC machining tool
Tool classification
Cutting tools can be divided into five categories according to the form of the workpiece machined surface.
Cutting tools for processing various outer surfaces, including cutting tools for processing various outer surfaces, including turning tools, planing knives, milling cutters, outer surface broach and file, etc.
Hole processing tools, including drill, reaming drill, boring cutter, milling cutter and internal surface broach, etc.
Thread processing tools, including tap, die, automatic opening thread cutting head, thread turning tool and thread milling cutter.
Gear processing tools, including hob, gear shaper cutter, shaving cutter, bevel gear processing tool, etc.
Cutting tools, including inserted circular saw blade, band saw, bow saw, cutting tool and saw blade milling cutter, etc.
In addition, there are combination tools.
Hole cutting tool
Tool structure
The structure of various tools is composed of a clamping part and a working part. The clamping part and working part of the overall structure of the tool are done on the tool body; The working part of the tool (the tooth or blade) is mounted on the tool body.
The clamping part of the tool has two kinds of holes and handles. The tool with hole relies on the inner hole set on the spindle or mandrel of the machine tool, and transmits the torsional torque with the help of the axial key or the end key, such as the cylindrical milling cutter and the sleeve face milling cutter.
The tool with the handle is usually rectangular handle, cylindrical handle and conical handle three kinds. Turning tools, planing tools, etc. are generally rectangular handles; The conical handle withstands the axial thrust with the taper and transmits the torque with the help of friction. Cylindrical shank is generally suitable for smaller twist drill, end mill and other tools, cutting with the help of the friction generated when clamping torque transfer. The shank of many tools with handles is made of low alloy steel, and the working part is made of high speed steel welded to each other.
The basic properties that the tool material should have
1. High hardness
The hardness of the tool material must be higher than the hardness of the workpiece material to be machined, which is the basic feature that the tool material should have.
2. Sufficient strength and toughness
The material of the cutting part of the tool must withstand great cutting force and impact force when cutting. The bending strength and impact toughness reflect the ability of tool material to resist brittle fracture and edge breakage.
3. High wear resistance and heat resistance
The wear resistance of tool materials refers to the ability to resist wear. The higher the hardness of the tool material, the better the wear resistance; The higher the high temperature hardness, the better the heat resistance, the tool material at high temperature resistance to plastic deformation, anti-wear ability is also stronger.
4. Good thermal conductivity
Large thermal conductivity means good thermal conductivity, and the heat capacity generated during cutting is easily transmitted out, thereby reducing the temperature of the cutting part and reducing tool wear.
5. Good technology and economy
In order to facilitate manufacturing, the tool material is required to have good machinability, including forging, welding, cutting, heat treatment, grindability and so on. Economy is one of the important indexes to evaluate and promote the application of new tool materials.
6. Resistance to bonding
Prevent the workpiece and the tool material molecules under the action of high temperature and high pressure adsorption bond.
7. Chemical stability
It means that the tool material is not easy to react chemically with the surrounding medium at high temperature.
Tool coating
Aluminum alloy indexable inserts are now coated with hard or composite layers of titanium carbide, titanium nitride, alumina by chemical vapor deposition. The physical vapor deposition method that is being developed can be used not only for aluminum alloy tools, but also for high-speed steel tools such as drills, hobs, taps and milling cutters. As a barrier that prevents chemical diffusion and heat conduction, the hard coating slows down the wear rate of the tool during cutting, and the life of the coated blade is about 1 to 3 times higher than that of the uncoated blade.
How to choose a tool
Tool selection is carried out in the human-machine interaction state of NC programming. The tool and handle should be correctly selected according to the machining capacity of the machine tool, the performance of the workpiece material, the processing procedure, the cutting amount and other relevant factors.
The general principle of tool selection: easy installation and adjustment, good rigidity, high durability and accuracy. On the premise of meeting the processing requirements, try to choose a shorter tool handle to improve the rigidity of the tool processing. When selecting the tool, the size of the tool should be adapted to the surface size of the workpiece to be machined.
1. End milling cutter is often used to process the peripheral outline of plane parts.
2. When milling the plane, carbide blade milling cutter should be selected.
3. When processing convex and grooves, choose high-speed steel end milling cutter.
4. When processing the blank surface or roughing the hole, you can choose the corn milling cutter with cemented carbide blade.
5. For the processing of some vertical surface and variable bevel contour, ball end milling cutter, ring milling cutter, conical milling cutter and disk milling cutter are often used.
6. In the processing of free-form surface, because the cutting speed of the end of the ball head tool is zero, so in order to ensure the processing accuracy, the cutting line spacing is generally very dense, so the ball head is often used in the finishing of the surface.
7, flat head tool in the surface processing quality and cutting efficiency are better than the ball head knife, therefore, as long as the premise of ensuring but cutting, whether it is rough surface machining or finishing, should be preferred to choose flat head knife.
8. In the machining center, various tools are installed on the tool library, and the tool selection and tool change are carried out at any time according to the procedure. Therefore, the standard tool handle must be used in order to make the standard tool for drilling, boring, expanding, milling and other processes quickly and accurately installed on the machine spindle or tool library. The number of tools should be reduced as far as possible; After a tool is installed, it should complete all the processing parts that it can carry out; Rough finishing tools should be used separately, even if the same size specifications of the tool; Milling before drilling; Surface finishing is carried out first, and then 2D contour finishing is carried out. Where possible, the automatic tool change function of CNC machine tools should be used as much as possible to improve production efficiency.
Problems encountered in processing aluminum and solutions
Problems encountered in processing aluminum and solutions when processing pure aluminum, easy to stick knife analysis and solutions:
1. Aluminum material is soft in texture and easy to stick at high temperature;
2. Aluminum is not resistant to high temperature, easy to open;
3. Related to processing cutting fluid: good oil lubrication performance; Good water-soluble cooling performance; High dry cutting cost;
4. When processing pure aluminum, the end mill dedicated to aluminum processing should be selected: positive front Angle, sharp cutting edge, large chip discharge slot, 45 degrees or 55 degrees helix Angle;
5. The material of the workpiece and the CNC tool has a greater affinity.
6. Rough front tool processing soft materials.
Recommendation: Machine tool conditions are poor to good requirements are low to high, please use high-speed steel, coated polished carbide, PCD polycrystalline diamond and single crystal diamond.
7. Low speed can be avoided by cutting fluid, high speed oil mist lubrication, the effect can be improved, aluminum alloy suitable
Tool future development direction
Due to the high temperature, high pressure, high speed, and the parts working in the corrosive fluid medium, the application of difficult to process more and more materials, the automation level of cutting processing and the processing accuracy requirements are getting higher and higher. In order to adapt to this situation, the development direction of the tool will be the development and application of new tool materials; Further develop the vapor deposition coating technology of the tool, and deposit higher hardness coating on the matrix of high toughness and high strength, so as to better solve the contradiction between hardness and strength of the tool material; Further development of indexable tool structure; Improve the manufacturing accuracy of the tool, reduce the difference in product quality, and optimize the use of the tool.How to choose CNC aluminum alloy machining tool.
No machine can be made without holes. To connect the parts together, a variety of different sizes of screw holes, pin holes or rivet holes are required; In order to fix the transmission parts, various mounting holes are needed; The machine parts themselves also have many kinds of holes (such as oil holes, process holes, weight reduction holes, etc.). The operation of machining holes so that the holes meet the requirements is called hole machining.
The surface of the inner hole is one of the important surfaces of the mechanical parts. In mechanical parts, parts with holes generally account for 50% to 80% of the total number of parts. The types of holes are also diverse, there are cylindrical holes, conical holes, threaded holes and shaped holes. Common cylindrical holes are divided into general holes and deep holes, and deep holes are difficult to process.
Advantages of U drill
1. First of all, the difference between U drill and ordinary drill is that U drill uses the peripheral blade and the center blade, at this Angle, the relationship between U drill and ordinary hard drill is actually similar to the relationship between the machine clamping turning tool and the welding turning tool, and the blade can be replaced directly after the tool is worn without regrinding. After all, the use of indexable blades still saves material than the whole hard drill, and the consistency of the blade makes it easier to control the size of the part.
2. The rigidity of U drill is better, you can use a high feed rate, and the processing diameter of U drill is much larger than that of ordinary drill, the maximum can reach D50~60mm, of course, U drill can not be too small due to the characteristics of the blade.
3.U drill encounter a variety of materials only need to replace the same type of different grades of blade, hard drill is not so convenient.
4. Compared with hard drilling, the precision of the hole drilled by U drilling is still higher, and the finish is better, especially when the cooling and lubrication are not smooth, it is more obvious, and U drilling can correct the position accuracy of the hole, and hard drilling can not be done, and U drilling can be used as a bore knife.
Advantages of U drill in CNC machining
1. U drill can punch holes on surfaces with inclination angles less than 30~ without reducing cutting parameters.
2. After the cutting parameters of U drilling are reduced by 30%, intermittent cutting can be achieved, such as processing intersecting holes, intersecting holes, and phase perforation.
3. U drilling can realize the drilling of multi-step holes, and can boring, chamfer, eccentric drilling.
4. When drilling, the drilling chips are mostly short chips, and the internal cooling system can be used for safe chip removal, without cleaning the chips on the tool, which is conducive to the continuity of the processing of the product, shorten the processing time and improve efficiency.
5. Under the condition of standard length-diameter ratio, no chip removal is required when drilling with U drill.
6. U drill for indexable tool, blade wear without sharpening, more convenient replacement, and low cost.
7. The surface roughness value of the hole processed by U drilling is small, and the tolerance range is small, which can replace the work of some boring tools.
8. The use of U drilling does not need to pre-punch the center hole, and the blind hole bottom surface processed is relatively straight, eliminating the flat-bottom drill.
9. The use of U drilling technology can not only reduce drilling tools, and because U drilling is the head of the cemented carbide blade, its cutting life is more than ten times the ordinary drill, at the same time, there are four cutting edges on the blade, blade wear can be replaced at any time cutting, the new cutting saves a lot of grinding and replacing the tool time, can improve the average efficiency 6-7 times.
U drill in the use of CNC machine tools skills
1. When using U drill, the rigidity of the machine tool and the neutrality of the tool and the workpiece are high, so U drill is suitable for use on high-power, high-rigidity and high-speed CNC machine tools.
2. When using U drilling, the center blade should be used with good toughness, and the peripheral blade should be used with relatively sharp blades.
3. When processing different materials, should choose different groove blade, under normal circumstances, small feed, small tolerance, U drilling length to diameter ratio, choose the groove blade with smaller cutting force, on the contrary, rough machining, large tolerance, U drilling length to diameter ratio is small, then choose the groove blade with larger cutting force.
4. When using U drilling, we must consider the power of the machine tool spindle, the stability of U drilling clamping, the pressure and flow of cutting fluid, and control the chip removal effect of U drilling, otherwise it will greatly affect the surface roughness and dimensional accuracy of the hole.
5. When installing the U drill, it is necessary to make the U drill center coincide with the center of the workpiece and be perpendicular to the surface of the workpiece.
6. When using U drilling, the appropriate cutting parameters should be selected according to different parts materials.
7. When drilling test cutting, be sure not to reduce the feed or speed at will because of caution and fear, so that the U drill blade is damaged or the U drill is damaged.
8. When using U-drill processing, when the blade is worn or damaged, it is necessary to carefully analyze the reasons and replace the blade with better toughness or more wear-resistant.
9. When using U drill to process step holes, it is necessary to start processing from large holes and then process small holes.
10. When drilling, pay attention to the cutting fluid to have enough pressure in order to flush out the chips.
11. The blade used on the center and edge of the U drill is different, must not be misused, otherwise it will damage the U drill rod.
12. When drilling with U-drill, workpiece rotation, tool rotation, and simultaneous rotation of the tool and workpiece can be used, but when the tool is moved in a linear feed mode, the most common method is to use the workpiece rotation mode.
13. The performance of the lathe should be considered when machining on the CNC car, and the cutting parameters should be adjusted appropriately, generally reducing the speed and low feed.
U drill in CNC machining often appear problems
1. The blade is damaged too fast, easy to break, and the processing cost increases.
2. A harsh whistle is emitted during processing, and the cutting state is abnormal.
3. Machine jitter, affecting the machining accuracy of machine tools.
U drill use points to note
1. The installation of U drill should pay attention to the positive and negative directions, which blade is up, which blade is down, which is facing inside and which is facing outside.
2. The center height of U drilling must be corrected, according to its diameter size to require the control range, generally controlled within 0.1mm, the smaller the diameter of U drilling, the higher the center height requirements, the center height is not good U drilling two sides will wear, the aperture will be larger, the blade service life will be shortened, small U drilling is easy to break.
3. U drill has very high requirements for coolant, it must be ensured that the coolant is emitted from the center of U drill, the greater the pressure of the coolant, the better, the excess water outlet of the tower can be blocked up to ensure its pressure.
4, U drilling cutting parameters in strict accordance with the manufacturer's instructions, but also to consider different brands of blades, machine power, processing can refer to the load value of the machine tool size, make appropriate adjustments, generally using high speed, low feed.
5.U drill blade to check often, timely replacement, different blades can not be installed reverse.
6. According to the hardness of the workpiece and the length of the tool suspension to adjust the feed amount, the harder the workpiece, the larger the tool suspension, the smaller the cutting amount.
7. Do not use excessive wear of the blade, should be recorded in the production of blade wear and the relationship between the number of workpieces can be machined, timely replacement of new blades.
8. Use sufficient internal coolant with correct pressure. The main function of the coolant is chip removal and cooling.
9.U drill can not be used for processing softer materials, such as copper, soft aluminum, etc.
Honscn has more than ten years of cnc machining experience, specializing in cnc machining, hardware mechanical parts processing, automation equipment parts processing. Robot parts processing, UAV parts processing, bicycle parts processing, medical parts processing, etc. It is one of the high-quality suppliers of cnc machining. At present, the company has more than 50 sets of cnc machining centers, grinding machines, milling machines, high-quality high-precision testing equipment, to provide customers with precision and high-quality cnc spare parts processing services.
The surface of the inner hole is one of the important surfaces of the mechanical parts. In mechanical parts, parts with holes generally account for 50% to 80% of the total number of parts. The types of holes are also diverse, there are cylindrical holes, conical holes, threaded holes and shaped holes. Common cylindrical holes are divided into general holes and deep holes, and deep holes are difficult to process.
Advantages of U drill
1. First of all, the difference between U drill and ordinary drill is that U drill uses the peripheral blade and the center blade, at this Angle, the relationship between U drill and ordinary hard drill is actually similar to the relationship between the machine clamping turning tool and the welding turning tool, and the blade can be replaced directly after the tool is worn without regrinding. After all, the use of indexable blades still saves material than the whole hard drill, and the consistency of the blade makes it easier to control the size of the part.
2. The rigidity of U drill is better, you can use a high feed rate, and the processing diameter of U drill is much larger than that of ordinary drill, the maximum can reach D50~60mm, of course, U drill can not be too small due to the characteristics of the blade.
3.U drill encounter a variety of materials only need to replace the same type of different grades of blade, hard drill is not so convenient.
4. Compared with hard drilling, the precision of the hole drilled by U drilling is still higher, and the finish is better, especially when the cooling and lubrication are not smooth, it is more obvious, and U drilling can correct the position accuracy of the hole, and hard drilling can not be done, and U drilling can be used as a bore knife.
Advantages of U drill in CNC machining
1. U drill can punch holes on surfaces with inclination angles less than 30~ without reducing cutting parameters.
2. After the cutting parameters of U drilling are reduced by 30%, intermittent cutting can be achieved, such as processing intersecting holes, intersecting holes, and phase perforation.
3. U drilling can realize the drilling of multi-step holes, and can boring, chamfer, eccentric drilling.
4. When drilling, the drilling chips are mostly short chips, and the internal cooling system can be used for safe chip removal, without cleaning the chips on the tool, which is conducive to the continuity of the processing of the product, shorten the processing time and improve efficiency.
5. Under the condition of standard length-diameter ratio, no chip removal is required when drilling with U drill.
6. U drill for indexable tool, blade wear without sharpening, more convenient replacement, and low cost.
7. The surface roughness value of the hole processed by U drilling is small, and the tolerance range is small, which can replace the work of some boring tools.
8. The use of U drilling does not need to pre-punch the center hole, and the blind hole bottom surface processed is relatively straight, eliminating the flat-bottom drill.
9. The use of U drilling technology can not only reduce drilling tools, and because U drilling is the head of the cemented carbide blade, its cutting life is more than ten times the ordinary drill, at the same time, there are four cutting edges on the blade, blade wear can be replaced at any time cutting, the new cutting saves a lot of grinding and replacing the tool time, can improve the average efficiency 6-7 times.
U drill in the use of CNC machine tools skills
1. When using U drill, the rigidity of the machine tool and the neutrality of the tool and the workpiece are high, so U drill is suitable for use on high-power, high-rigidity and high-speed CNC machine tools.
2. When using U drilling, the center blade should be used with good toughness, and the peripheral blade should be used with relatively sharp blades.
3. When processing different materials, should choose different groove blade, under normal circumstances, small feed, small tolerance, U drilling length to diameter ratio, choose the groove blade with smaller cutting force, on the contrary, rough machining, large tolerance, U drilling length to diameter ratio is small, then choose the groove blade with larger cutting force.
4. When using U drilling, we must consider the power of the machine tool spindle, the stability of U drilling clamping, the pressure and flow of cutting fluid, and control the chip removal effect of U drilling, otherwise it will greatly affect the surface roughness and dimensional accuracy of the hole.
5. When installing the U drill, it is necessary to make the U drill center coincide with the center of the workpiece and be perpendicular to the surface of the workpiece.
6. When using U drilling, the appropriate cutting parameters should be selected according to different parts materials.
7. When drilling test cutting, be sure not to reduce the feed or speed at will because of caution and fear, so that the U drill blade is damaged or the U drill is damaged.
8. When using U-drill processing, when the blade is worn or damaged, it is necessary to carefully analyze the reasons and replace the blade with better toughness or more wear-resistant.
9. When using U drill to process step holes, it is necessary to start processing from large holes and then process small holes.
10. When drilling, pay attention to the cutting fluid to have enough pressure in order to flush out the chips.
11. The blade used on the center and edge of the U drill is different, must not be misused, otherwise it will damage the U drill rod.
12. When drilling with U-drill, workpiece rotation, tool rotation, and simultaneous rotation of the tool and workpiece can be used, but when the tool is moved in a linear feed mode, the most common method is to use the workpiece rotation mode.
13. The performance of the lathe should be considered when machining on the CNC car, and the cutting parameters should be adjusted appropriately, generally reducing the speed and low feed.
U drill in CNC machining often appear problems
1. The blade is damaged too fast, easy to break, and the processing cost increases.
2. A harsh whistle is emitted during processing, and the cutting state is abnormal.
3. Machine jitter, affecting the machining accuracy of machine tools.
U drill use points to note
1. The installation of U drill should pay attention to the positive and negative directions, which blade is up, which blade is down, which is facing inside and which is facing outside.
2. The center height of U drilling must be corrected, according to its diameter size to require the control range, generally controlled within 0.1mm, the smaller the diameter of U drilling, the higher the center height requirements, the center height is not good U drilling two sides will wear, the aperture will be larger, the blade service life will be shortened, small U drilling is easy to break.
3. U drill has very high requirements for coolant, it must be ensured that the coolant is emitted from the center of U drill, the greater the pressure of the coolant, the better, the excess water outlet of the tower can be blocked up to ensure its pressure.
4, U drilling cutting parameters in strict accordance with the manufacturer's instructions, but also to consider different brands of blades, machine power, processing can refer to the load value of the machine tool size, make appropriate adjustments, generally using high speed, low feed.
5.U drill blade to check often, timely replacement, different blades can not be installed reverse.
6. According to the hardness of the workpiece and the length of the tool suspension to adjust the feed amount, the harder the workpiece, the larger the tool suspension, the smaller the cutting amount.
7. Do not use excessive wear of the blade, should be recorded in the production of blade wear and the relationship between the number of workpieces can be machined, timely replacement of new blades.
8. Use sufficient internal coolant with correct pressure. The main function of the coolant is chip removal and cooling.
9.U drill can not be used for processing softer materials, such as copper, soft aluminum, etc.
Honscn has more than ten years of cnc machining experience, specializing in cnc machining, hardware mechanical parts processing, automation equipment parts processing. Robot parts processing, UAV parts processing, bicycle parts processing, medical parts processing, etc. It is one of the high-quality suppliers of cnc machining. At present, the company has more than 50 sets of cnc machining centers, grinding machines, milling machines, high-quality high-precision testing equipment, to provide customers with precision and high-quality cnc spare parts processing services.
Thread machining is one of the very important applications of CNC machining center. The machining quality and efficiency of thread will directly affect the machining quality of parts and the production efficiency of machining center.With the improvement of the performance of CNC machining center and the improvement of cutting tools, the method of thread machining is also improving, and the accuracy and efficiency of thread machining are also gradually improving. In order to enable technicians to reasonably select thread processing methods in processing, improve production efficiency and avoid quality accidents, several thread processing methods commonly used in CNC machining center are summarized as follows:1. Tap processing method
1.1 classification and characteristics of tap processingUsing tap to process threaded hole is the most commonly used processing method. It is mainly applicable to threaded holes with small diameter (d30) and low requirements for hole position accuracy.
In the 1980s, the flexible tapping method was adopted for threaded holes, that is, the flexible tapping collet was used to clamp the tap. The tapping collet can be used for axial compensation to compensate the feed error caused by the non synchronization between the axial feed of the machine tool and the spindle speed, so as to ensure the correct pitch. The flexible tapping collet has complex structure, high cost, easy damage and low processing efficiency. In recent years, the performance of CNC machining center Gradually, the rigid tapping function has become the basic configuration of CNC machining center.
Therefore, rigid tapping has become the main method of thread machining.That is, the tap is clamped with a rigid spring collet, and the feed of the spindle is consistent with the spindle speed controlled by the machine tool.Compared with the flexible tapping chuck, the spring chuck has the advantages of simple structure, low price and wide application. In addition to holding the tap, it can also hold the end milling cutter, drill bit and other tools, which can reduce the tool cost. At the same time, the rigid tapping can be used for high-speed cutting, improve the use efficiency of the processing center and reduce the manufacturing cost.
1.2 determination of threaded bottom hole before tappingThe processing of threaded bottom hole has a great impact on the life of tap and the quality of thread processing. Generally, the diameter of threaded bottom hole drill is close to the upper limit of the diameter tolerance of threaded bottom hole,For example, the bottom hole diameter of M8 threaded hole is 6.7 0.27mm, select the drill bit diameter as 6.9mm. In this way, the machining allowance of tap can be reduced, the load of tap can be reduced, and the service life of tap can be improved.
1.3 selection of tapWhen selecting taps, first of all, the corresponding taps must be selected according to the processed materials. The tool company produces different types of taps according to different processing materials, and special attention should be paid to the selection.
Because the tap is very sensitive to the processed materials compared with the milling cutter and boring cutter. For example, using the tap for processing cast iron to process aluminum parts is easy to cause thread dropping, disorderly threading and even tap breaking, resulting in workpiece scrapping. Secondly, pay attention to the difference between the through-hole tap and the blind hole tap. The front-end guide of the through-hole tap is long, and the chip removal is the front-end chip. The front-end guide of the blind hole is short, and the chip removal is the front-end It is the back chip. Machining the blind hole with a through-hole tap cannot guarantee the thread machining depth. Moreover, if a flexible tapping collet is used, it should also be noted that the diameter of the tap handle and the width of the four sides should be the same as that of the tapping collet; the diameter of the tap handle for rigid tapping should be the same as that of the spring jacket. In short, only a reasonable selection of the tap can ensure the smooth machining.
1.4 NC programming of tap machiningThe programming of tap machining is relatively simple. Now the machining center generally solidifies the tapping subroutine and only needs to assign values to various parameters. However, it should be noted that the meaning of some parameters is different due to different NC systems and different subroutine formats.For example, the programming format of Siemens 840C control system is g84 x_y_r2_r3_r4_r5_r6_r7_r8_r9_r10_r13_. Only these 12 parameters need to be assigned during programming.
2. Thread milling method2.1 characteristics of thread millingThread milling adopts thread milling tool and three-axis linkage of machining center, that is, x-axis and y-axis arc interpolation and z-axis linear feed.
Thread milling is mainly used to process large hole threads and threaded holes of difficult to process materials. It mainly has the following characteristics:(1) high processing speed, high efficiency and high processing precision. The tool material is generally cemented carbide, with fast tool walking speed. The manufacturing precision of the tool is high, so the milling thread precision is high.(2) the milling tool has a wide range of application. As long as the pitch is the same, whether it is left-hand thread or right-hand thread, one tool can be used, which is conducive to reducing the tool cost.
(3) milling is easy to remove chips and cool, and the cutting condition is better than that of tap. It is especially suitable for thread processing of difficult to process materials such as aluminum, copper and stainless steel, especially for thread processing of large parts and components of precious materials, which can ensure the thread processing quality and workpiece safety.(4) because there is no tool front-end guide, it is suitable for machining blind holes with short thread bottom holes and holes without tool return grooves.2.2 classification of thread milling tools
Thread milling tools can be divided into two types, one is the machine clamp cemented carbide blade milling cutter, and the other is the integral cemented carbide milling cutter. The machine clamp cutter has a wide range of applications. It can process holes with thread depth less than the blade length or holes with thread depth greater than the blade length. The integral cemented carbide milling cutter is generally used to process holes with thread depth less than the tool length.2.3 NC programming of thread millingThe programming of thread milling tool is different from that of other tools. If the processing program is wrong, it is easy to cause tool damage or thread processing error. The following points should be paid attention to during programming:
(1) firstly, the threaded bottom hole shall be processed well, the small diameter hole shall be processed with a drill, and the larger hole shall be bored to ensure the accuracy of the threaded bottom hole.(2) when cutting in and cutting out the tool, the arc path shall be adopted, usually 1 / 2 turn, and 1 / 2 pitch shall be traveled in the z-axis direction to ensure the thread shape. The tool radius compensation value shall be brought in at this time.(3) the x-axis and y-axis circular arc shall be interpolated for one week, and the main shaft shall travel a pitch along the z-axis direction, otherwise the threads will be buckled disorderly.
(4) specific example program: the diameter of thread milling cutter is 16. The threaded hole is M48 1.5, the depth of threaded hole is 14.The processing procedure is as follows:(the procedure of threaded bottom hole is omitted, and the bottom hole shall be bored) G0 G90 g54 x0 y0g0 Z10 m3 s1400 m8g0 z-14.75 feed to the deepest thread G01 G41 x-16 Y0 F2000 move to the feed position, add radius compensation G03 x24 Y0 z-14 I20 J0 f500 cut in with 1 / 2 circle of arc G03 x24 Y0 Z0 I-24 J0 F400 cut the whole thread G03 x-16 Y0 z0.75 I-20 J0 f500 cut out with 1 / 2 circle of arc G01 G40 x0 Y0 return to the center and cancel radius compensation G0 Z100M30
3. Snap method3.1 characteristics of snap methodLarge threaded holes can sometimes be encountered on box parts. In the absence of tap and thread milling cutter, the method similar to lathe pick-up can be adopted.
Install the thread turning tool on the boring bar to bore the thread.The company once processed a batch of parts with m52x1.5 thread and 0.1mm positional degree (see Figure 1). Because of the high positional requirements and large thread hole, it is impossible to process with tap and there is no thread milling cutter. After the test, the thread picking method is adopted to ensure the processing requirements.3.2 precautions for buckle picking method
(1) after the spindle is started, there shall be a delay time to ensure that the spindle reaches the rated speed.(2) during tool retraction, if it is a hand ground thread tool, because the tool cannot be grinded symmetrically, reverse tool retraction cannot be adopted. The spindle orientation must be adopted, the tool moves radially, and then the tool retraction.(3) the manufacturing of the cutter bar must be accurate, especially the position of the cutter slot must be consistent. If it is inconsistent, multiple cutter bars cannot be used for processing, otherwise it will cause disorderly buckle.
(4) even if it is a very fine buckle, it cannot be picked with one knife, otherwise it will cause tooth loss and poor surface roughness. At least two knives shall be divided.(5) the processing efficiency is low, which is only applicable to single piece, small batch, special pitch thread and no corresponding tool.3.3 specific procedures
N5 G90 G54 G0 X0 Y0N10 Z15N15 S100 M3 M8
N20 G04 X5 delay to make the spindle reach the rated speedN25 G33 z-50 K1.5 turnbuckleN30 M19 spindle orientation
N35 G0 X-2 cutterN40 G0 z15 tool retractionEditing: JQ
1.1 classification and characteristics of tap processingUsing tap to process threaded hole is the most commonly used processing method. It is mainly applicable to threaded holes with small diameter (d30) and low requirements for hole position accuracy.
In the 1980s, the flexible tapping method was adopted for threaded holes, that is, the flexible tapping collet was used to clamp the tap. The tapping collet can be used for axial compensation to compensate the feed error caused by the non synchronization between the axial feed of the machine tool and the spindle speed, so as to ensure the correct pitch. The flexible tapping collet has complex structure, high cost, easy damage and low processing efficiency. In recent years, the performance of CNC machining center Gradually, the rigid tapping function has become the basic configuration of CNC machining center.
Therefore, rigid tapping has become the main method of thread machining.That is, the tap is clamped with a rigid spring collet, and the feed of the spindle is consistent with the spindle speed controlled by the machine tool.Compared with the flexible tapping chuck, the spring chuck has the advantages of simple structure, low price and wide application. In addition to holding the tap, it can also hold the end milling cutter, drill bit and other tools, which can reduce the tool cost. At the same time, the rigid tapping can be used for high-speed cutting, improve the use efficiency of the processing center and reduce the manufacturing cost.
1.2 determination of threaded bottom hole before tappingThe processing of threaded bottom hole has a great impact on the life of tap and the quality of thread processing. Generally, the diameter of threaded bottom hole drill is close to the upper limit of the diameter tolerance of threaded bottom hole,For example, the bottom hole diameter of M8 threaded hole is 6.7 0.27mm, select the drill bit diameter as 6.9mm. In this way, the machining allowance of tap can be reduced, the load of tap can be reduced, and the service life of tap can be improved.
1.3 selection of tapWhen selecting taps, first of all, the corresponding taps must be selected according to the processed materials. The tool company produces different types of taps according to different processing materials, and special attention should be paid to the selection.
Because the tap is very sensitive to the processed materials compared with the milling cutter and boring cutter. For example, using the tap for processing cast iron to process aluminum parts is easy to cause thread dropping, disorderly threading and even tap breaking, resulting in workpiece scrapping. Secondly, pay attention to the difference between the through-hole tap and the blind hole tap. The front-end guide of the through-hole tap is long, and the chip removal is the front-end chip. The front-end guide of the blind hole is short, and the chip removal is the front-end It is the back chip. Machining the blind hole with a through-hole tap cannot guarantee the thread machining depth. Moreover, if a flexible tapping collet is used, it should also be noted that the diameter of the tap handle and the width of the four sides should be the same as that of the tapping collet; the diameter of the tap handle for rigid tapping should be the same as that of the spring jacket. In short, only a reasonable selection of the tap can ensure the smooth machining.
1.4 NC programming of tap machiningThe programming of tap machining is relatively simple. Now the machining center generally solidifies the tapping subroutine and only needs to assign values to various parameters. However, it should be noted that the meaning of some parameters is different due to different NC systems and different subroutine formats.For example, the programming format of Siemens 840C control system is g84 x_y_r2_r3_r4_r5_r6_r7_r8_r9_r10_r13_. Only these 12 parameters need to be assigned during programming.
2. Thread milling method2.1 characteristics of thread millingThread milling adopts thread milling tool and three-axis linkage of machining center, that is, x-axis and y-axis arc interpolation and z-axis linear feed.
Thread milling is mainly used to process large hole threads and threaded holes of difficult to process materials. It mainly has the following characteristics:(1) high processing speed, high efficiency and high processing precision. The tool material is generally cemented carbide, with fast tool walking speed. The manufacturing precision of the tool is high, so the milling thread precision is high.(2) the milling tool has a wide range of application. As long as the pitch is the same, whether it is left-hand thread or right-hand thread, one tool can be used, which is conducive to reducing the tool cost.
(3) milling is easy to remove chips and cool, and the cutting condition is better than that of tap. It is especially suitable for thread processing of difficult to process materials such as aluminum, copper and stainless steel, especially for thread processing of large parts and components of precious materials, which can ensure the thread processing quality and workpiece safety.(4) because there is no tool front-end guide, it is suitable for machining blind holes with short thread bottom holes and holes without tool return grooves.2.2 classification of thread milling tools
Thread milling tools can be divided into two types, one is the machine clamp cemented carbide blade milling cutter, and the other is the integral cemented carbide milling cutter. The machine clamp cutter has a wide range of applications. It can process holes with thread depth less than the blade length or holes with thread depth greater than the blade length. The integral cemented carbide milling cutter is generally used to process holes with thread depth less than the tool length.2.3 NC programming of thread millingThe programming of thread milling tool is different from that of other tools. If the processing program is wrong, it is easy to cause tool damage or thread processing error. The following points should be paid attention to during programming:
(1) firstly, the threaded bottom hole shall be processed well, the small diameter hole shall be processed with a drill, and the larger hole shall be bored to ensure the accuracy of the threaded bottom hole.(2) when cutting in and cutting out the tool, the arc path shall be adopted, usually 1 / 2 turn, and 1 / 2 pitch shall be traveled in the z-axis direction to ensure the thread shape. The tool radius compensation value shall be brought in at this time.(3) the x-axis and y-axis circular arc shall be interpolated for one week, and the main shaft shall travel a pitch along the z-axis direction, otherwise the threads will be buckled disorderly.
(4) specific example program: the diameter of thread milling cutter is 16. The threaded hole is M48 1.5, the depth of threaded hole is 14.The processing procedure is as follows:(the procedure of threaded bottom hole is omitted, and the bottom hole shall be bored) G0 G90 g54 x0 y0g0 Z10 m3 s1400 m8g0 z-14.75 feed to the deepest thread G01 G41 x-16 Y0 F2000 move to the feed position, add radius compensation G03 x24 Y0 z-14 I20 J0 f500 cut in with 1 / 2 circle of arc G03 x24 Y0 Z0 I-24 J0 F400 cut the whole thread G03 x-16 Y0 z0.75 I-20 J0 f500 cut out with 1 / 2 circle of arc G01 G40 x0 Y0 return to the center and cancel radius compensation G0 Z100M30
3. Snap method3.1 characteristics of snap methodLarge threaded holes can sometimes be encountered on box parts. In the absence of tap and thread milling cutter, the method similar to lathe pick-up can be adopted.
Install the thread turning tool on the boring bar to bore the thread.The company once processed a batch of parts with m52x1.5 thread and 0.1mm positional degree (see Figure 1). Because of the high positional requirements and large thread hole, it is impossible to process with tap and there is no thread milling cutter. After the test, the thread picking method is adopted to ensure the processing requirements.3.2 precautions for buckle picking method
(1) after the spindle is started, there shall be a delay time to ensure that the spindle reaches the rated speed.(2) during tool retraction, if it is a hand ground thread tool, because the tool cannot be grinded symmetrically, reverse tool retraction cannot be adopted. The spindle orientation must be adopted, the tool moves radially, and then the tool retraction.(3) the manufacturing of the cutter bar must be accurate, especially the position of the cutter slot must be consistent. If it is inconsistent, multiple cutter bars cannot be used for processing, otherwise it will cause disorderly buckle.
(4) even if it is a very fine buckle, it cannot be picked with one knife, otherwise it will cause tooth loss and poor surface roughness. At least two knives shall be divided.(5) the processing efficiency is low, which is only applicable to single piece, small batch, special pitch thread and no corresponding tool.3.3 specific procedures
N5 G90 G54 G0 X0 Y0N10 Z15N15 S100 M3 M8
N20 G04 X5 delay to make the spindle reach the rated speedN25 G33 z-50 K1.5 turnbuckleN30 M19 spindle orientation
N35 G0 X-2 cutterN40 G0 z15 tool retractionEditing: JQ
As a machine tool mainly used to process box and shell parts, the machining center is worth hundreds of thousands to millions. It is generally the key equipment in the key processes of the enterprise. Once the machine is shut down, the loss is often great. Therefore, in order to give full play to the benefits of the machine tool, we must pay attention to the maintenance and repair work. Because most of the daily electrical faults of CNC machine tools are electrical faults, electrical maintenance and repair are more important.1) CNC system control part2) Servo motor and spindle motor
Focus on noise and temperature rise. If the noise or temperature rise is too large, find out whether it is a mechanical problem such as bearing or the parameter setting of its matching amplifier, and take corresponding measures to solve it. For example, if there is abnormal sound during the movement of the servo shaft, and there is no obvious parameter change after verification, it is suspected that the mechanical noise may be caused by the lead screw, coupling and non concentricity with the servo motor. Disconnect the motor from the coupling and operate the motor separately. If the motor still has noise, adjust the speed loop gain and position loop gain appropriately, Make the motor silent. If there is no noise, judge that it is the concentricity between the lead screw and the coupling, re correct the concentricity, and then connect with the motor. The problem can be eliminated.
3) Measurement feedback elementIncluding encoder, grating ruler, etc., check whether the connection of detection elements is loose and whether they are polluted by oil or dust.4) Electrical control part
Check whether the three-phase power supply voltage is normal; Check whether the electrical components are well connected; Check whether various switches are effective with the aid of CRT display diagnosis screen; Check whether all relays and contactors work normally and whether the contacts are in good condition; Whether the thermal relay, arc suppressor and other protective elements are effective; Check whether the temperature of components inside the electrical cabinet is too high. For poor contact of contactor contact, the contactor can be disassembled, the high-temperature oxide on the contact surface can be scraped off with a small file, then the sundries can be wiped out with absorbent cotton and alcohol, reassembled, and then the contact can be conducted with a multimeter.
5) Improve utilization
If the machining center is idle for a long time, when it needs to be used, first of all, each moving link of the machine tool will affect its static and dynamic transmission performance due to grease solidification, dust and even rust, reduce the accuracy of the machine tool, and the blockage of the oil circuit system is a big trouble; From the electrical point of view, the electrical control system hardware is composed of tens of thousands of electronic components, and their performance and life are very discrete. If it is not used for a long time, when power is suddenly transmitted, the components will be damaged in high current and strong voltage. Therefore, in a period of time without machining task, it is best to run the machine tool at a low speed, and at least power on the NC system frequently, or even every day.
I have encountered this situation: a horizontal machining center, using FANUC system. After running the warm-up program, it processed and found that the qualified parts were processed in the morning, and the processed parts were unqualified by noon. After inspection by the on-site processing personnel, the positioning and fixture on the machine tool are not deformed or loose. However, when the spindle box is not processed and stationary, it will deviate downward by 0.1mm along the direction of the gravity axis. The technician judges that the temperature compensation fails or the temperature sensor has poor contact. However, the phenomenon still occurs after replacing the temperature sensor and temperature module and re entering CNC parameters and temperature compensation parameters. After expert consultation, it was finally found that it was not the sensor problem, but that there was a 2-meter-long and 1-meter-wide skylight facing the main shaft and column on the machine tool. At noon, the sun directly shines on the main shaft and column, resulting in thermal deformation. After the skylight is covered, the spindle box returns to normal. This is a typical maintenance error caused by improper maintenance. Therefore, proper daily maintenance provides convenience for overall maintenance in the future.
Focus on noise and temperature rise. If the noise or temperature rise is too large, find out whether it is a mechanical problem such as bearing or the parameter setting of its matching amplifier, and take corresponding measures to solve it. For example, if there is abnormal sound during the movement of the servo shaft, and there is no obvious parameter change after verification, it is suspected that the mechanical noise may be caused by the lead screw, coupling and non concentricity with the servo motor. Disconnect the motor from the coupling and operate the motor separately. If the motor still has noise, adjust the speed loop gain and position loop gain appropriately, Make the motor silent. If there is no noise, judge that it is the concentricity between the lead screw and the coupling, re correct the concentricity, and then connect with the motor. The problem can be eliminated.
3) Measurement feedback elementIncluding encoder, grating ruler, etc., check whether the connection of detection elements is loose and whether they are polluted by oil or dust.4) Electrical control part
Check whether the three-phase power supply voltage is normal; Check whether the electrical components are well connected; Check whether various switches are effective with the aid of CRT display diagnosis screen; Check whether all relays and contactors work normally and whether the contacts are in good condition; Whether the thermal relay, arc suppressor and other protective elements are effective; Check whether the temperature of components inside the electrical cabinet is too high. For poor contact of contactor contact, the contactor can be disassembled, the high-temperature oxide on the contact surface can be scraped off with a small file, then the sundries can be wiped out with absorbent cotton and alcohol, reassembled, and then the contact can be conducted with a multimeter.
5) Improve utilization
If the machining center is idle for a long time, when it needs to be used, first of all, each moving link of the machine tool will affect its static and dynamic transmission performance due to grease solidification, dust and even rust, reduce the accuracy of the machine tool, and the blockage of the oil circuit system is a big trouble; From the electrical point of view, the electrical control system hardware is composed of tens of thousands of electronic components, and their performance and life are very discrete. If it is not used for a long time, when power is suddenly transmitted, the components will be damaged in high current and strong voltage. Therefore, in a period of time without machining task, it is best to run the machine tool at a low speed, and at least power on the NC system frequently, or even every day.
I have encountered this situation: a horizontal machining center, using FANUC system. After running the warm-up program, it processed and found that the qualified parts were processed in the morning, and the processed parts were unqualified by noon. After inspection by the on-site processing personnel, the positioning and fixture on the machine tool are not deformed or loose. However, when the spindle box is not processed and stationary, it will deviate downward by 0.1mm along the direction of the gravity axis. The technician judges that the temperature compensation fails or the temperature sensor has poor contact. However, the phenomenon still occurs after replacing the temperature sensor and temperature module and re entering CNC parameters and temperature compensation parameters. After expert consultation, it was finally found that it was not the sensor problem, but that there was a 2-meter-long and 1-meter-wide skylight facing the main shaft and column on the machine tool. At noon, the sun directly shines on the main shaft and column, resulting in thermal deformation. After the skylight is covered, the spindle box returns to normal. This is a typical maintenance error caused by improper maintenance. Therefore, proper daily maintenance provides convenience for overall maintenance in the future.
no data
more products
Send your inquiry
you might like
no data
Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
Copyright © 2025 HONSCN |Sitemap Privacy Policy