Shop Best Cemented Carbide Nozzle Cnc Turned Parts in HONSCN
Honscn Co.,Ltd places great importance on raw materials used in the manufacturing of cemented carbide nozzle cnc turned parts. Each batch of raw materials is selected by our experienced team. When raw materials arrive at our factory, we take good care of processing them. We totally eliminate defective materials from our inspections.
HONSCN stands for quality assurance, which is widely accepted in the industry. We spare no efforts to ensure our roles fully implemented in the social events. For instance, we frequently participate in technical seminars with other enterprises and showcase our contributions to the development of the industry.
We make ourselves understand customers' requirements to ensure that we deliver the satisfying cemented carbide nozzle cnc turned parts and suchlike products at Honscn to meet or exceed customers' expectations with respect to price, MOQ, packaging and shipment method.
no data
How to choose the right CNC machining material？
The materials are wrong, all in vain! In order to produce satisfactory products, the choice of materials is the most basic step and the most critical step. CNC machining can choose a lot of materials, including metal materials, non-metallic materials and composite materials.
Common metal materials include steel, aluminum alloy, copper alloy, stainless steel and so on. Non-metallic materials are engineering plastics, nylon, bakelite, epoxy resin and so on. Composite materials are fiber reinforced plastic, carbon fiber reinforced epoxy resin, glass fiber reinforced aluminum and so on.
Different materials have different physical and mechanical properties, and the correct selection of the right material is critical to the performance, accuracy and durability of the part. Starting from my own experience, this article will share with you how to choose low cost and suitable materials among many processing materials.
Determine the actual application requirements of the product
First, we need to determine the end use of the product and its parts. For example, medical equipment needs to be disinfected, lunch boxes need to be heated in the microwave oven, bearings, gears, etc., need to be used for load-bearing and multiple rotational friction.
Transform the application requirements of the material into the characteristics of the material
After determining the use, starting from the actual application needs of the product, the use of the product is investigated, and its technical requirements and environmental requirements are analyzed, and these needs are transformed into the characteristics of the material. For example, parts of medical equipment may have to withstand the extreme heat of an autoclave; Bearings, gears and other materials have requirements for wear resistance, tensile strength and compressive strength. Mainly can be analyzed from the following points:
01 Environmental Requirements
Analyze the actual use scenario and environment of the product; For example: What is the long-term working temperature of the product, the highest/lowest working temperature, respectively, belonging to high temperature or low temperature? Are there UV protection requirements indoors or outdoors? Is it in a dry environment or a humid, corrosive environment? Etc.
02 Technical Requirements
According to the technical requirements of the product, the required capabilities are analyzed, which can cover a range of application-related factors. Such as: the product needs to have conductive, insulating or anti-static which of the capabilities? Is heat dissipation, thermal conductivity, or flame retardant required? Do you need exposure to chemical solvents? Etc.
03 Physical Performance requirements
Analyze the required physical properties of the part based on the intended use of the product and the environment in which it will be used. For parts subjected to high stress or wear, factors such as strength, toughness and wear resistance are critical; For parts exposed to high temperatures for a long time, good thermal stability is required.
04 Appearance and surface treatment requirements
The market acceptance of the product depends largely on the appearance, the color and transparency of different materials are different, the finish and the corresponding surface treatment are also different. Therefore, according to the aesthetic requirements of the product, the processing materials should be selected.
05 Processing performance considerations
The machining properties of the material will affect the manufacturing process and accuracy of the part. For example, although stainless steel is rust resistant and corrosion resistant, its hardness is high, and it is easy to wear the tool during processing, resulting in very high processing costs, and it is not a good material to process. The plastic hardness is low, but it is easy to soften and deform during the heating process, and the stability is poor, which needs to be selected according to actual needs.
Find materials that match the characteristics
Because the actual application requirements of the product are composed of a number of contents, there may be multiple materials that meet the application requirements of a product; Or the situation where the optimal selection of different application requirements corresponds to different materials; We may end up with several materials that meet our specific requirements. Therefore, once the desired material properties are clearly defined, the remaining selection step is to search for the material that best matches those properties.
The selection of candidate materials begins with a review of material properties data, of course, it is not possible to investigate thousands of applied materials, and there is no need to do so. We can start from the material category, and first decide whether we need metal materials, non-metallic materials or composite materials. Then the previous analysis results, corresponding to the material characteristics, narrow the selection of candidate materials. Finally, the material cost information is used to select the most suitable material for the product from a number of candidate materials.
At present, Honscn has selected and launched a number of materials suitable for processing, which have been a popular choice for our customers.
Introduction to the properties of metal materials
Metallic materials refer to materials with properties such as luster, ductility, easy conduction and heat transfer. Its performance is mainly divided into four aspects, namely: mechanical properties, chemical properties, physical properties, process properties. These properties determine the scope of application of the material and the rationality of the application, which is an important reference for us to choose metal materials.The following will introduce two types of metal materials, aluminum alloy and copper alloy, which have different mechanical properties and processing characteristics.
Aluminium alloy
There are more than 1000 aluminum alloy grades registered in the world, each brand name and meaning are different, different grades of aluminum alloy in hardness, strength, processability, decoration, corrosion resistance, weldability and other mechanical properties and chemical properties there are obvious differences, each has its strengths and weaknesses.
hardness
Hardness refers to its ability to resist scratches or indentations. It has a direct relationship with the chemical composition of the alloy, and different states have different effects on the hardness of aluminum. The hardness directly affects the cutting speed and the type of tool material that can be used in CNC machining.
From the highest hardness that can be achieved, 7 series > 2 series > 6 series > 5 series > 3 series > 1 series.
intensity
Strength refers to its ability to resist deformation and fracture, commonly used indicators include yield strength, tensile strength and so on.
It is an important factor that must be considered in product design, especially when aluminum alloy components are used as structural parts, the appropriate alloy should be selected according to the pressure under.
There is a positive relationship between hardness and strength: the strength of pure aluminum is the lowest, and the strength of 2 series and 7 series heat-treated alloys is the highest.
density
Density refers to its mass per unit volume and is often used to calculate the weight of a material.
Density is an important factor for a variety of different applications. Depending on the application, the density of aluminum will have a significant impact on how it is used. For example, lightweight, high-strength aluminum is ideal for construction and industrial applications.
The density of aluminum is about 2700kg/m³, and the density value of different types of aluminum alloy does not change much.
Corrosion resistance
Corrosion resistance refers to its ability to resist corrosion when in contact with other substances. It includes chemical corrosion resistance, electrochemical corrosion resistance, stress corrosion resistance and other properties.
Corrosion resistance selection principle should be based on its use occasion, high-strength alloy used in a corrosive environment, must use a variety of anti-corrosion composite materials.
In general, the corrosion resistance of series 1 pure aluminum is the best, series 5 performs well, followed by series 3 and 6, and series 2 and 7 are poor.
processability
The machinability includes formability and machinability. Because formability is related to the state, after selecting the grade of aluminum alloy, it is also necessary to consider the strength range of each state, usually high strength materials are not easy to form.
If the aluminum is to be bent, drawn, deep drawing and other forming processes, the formability of the fully annealed material is the best, and on the contrary, the formability of the heat-treated material is the worst.
The machinability of aluminum alloy has a great relationship with the alloy composition, usually higher strength aluminum alloy machinability is better, on the contrary, low strength machinability is poor.
For molds, mechanical parts and other products that need to be cut, the machinability of aluminum alloy is an important consideration.
Welding and bending properties
Most aluminum alloys are welded without problems. In particular, some 5 series aluminum alloys are specially designed for welding considerations; Relatively speaking, some 2 series and 7 series aluminum alloys are more difficult to weld.
In addition, the 5 series aluminum alloy is also the most suitable for bending a class of aluminum alloy products.
Decorative property
When aluminum is applied to decoration or some specific occasions, its surface needs to be processed to obtain the corresponding color and surface organization. This situation requires us to focus on the decorative properties of materials.
Aluminum surface treatment options include anodizing and spraying. In general, materials with good corrosion resistance have excellent surface treatment properties.
Other characteristics
In addition to the above characteristics, there are electrical conductivity, wear resistance, heat resistance and other properties, we need to consider more in the selection of materials.
Copper alloy
Orichalcum
Brass is an alloy of copper and zinc. Brass with different mechanical properties can be obtained by changing the content of zinc in brass. The higher the content of zinc in brass, the higher its strength and slightly lower plasticity.
The zinc content of the brass used in the industry does not exceed 45%, and the zinc content will be brittle and make the alloy performance worse. Adding 1% tin to brass can significantly improve the resistance of brass to seawater and Marine atmosphere corrosion, so it is called "navy brass".
Tin can improve the machinability of brass. Lead brass is commonly referred to as easy to cut national standard copper. The main purpose of adding lead is to improve the machinability and wear resistance, and lead has little effect on the strength of brass. Carving copper is also a kind of lead brass.
Most brasses have good color, processability, ductility, and are easy to electroplate or paint.
Red copper
Copper is pure copper, also known as red copper, has good electrical and thermal conductivity, excellent plasticity, easy hot pressing and cold pressure processing, can be made into plates, rods, tubes, wires, strips, foil and other copper.
A large number of products that require good electrical conductivity such as electrocorroded copper and conductive bars for the manufacture of EDM, magnetic instruments and instruments that must be resistant to magnetic interference, such as compass and aviation instruments.
No matter what kind of material, a single model basically can not meet all the performance requirements of a product at the same time, and it is not necessary. We should set the priority of various performance according to the performance requirements of the product, the use of the environment, the processing process and other factors, reasonable selection of materials, and reasonable control of costs under the premise of ensuring performance.
Follow us
Starts with hardware, doesn't stop with hardware. Honscn is committed to providing fastener/CNC industry chain one-stop service.
1. The unmarked shape tolerance shall meet the requirements of gb1184-80.
2. The allowable deviation of unmarked length dimension is 0.5mm.
3. Unspecified fillet radius R5.
4. All undeclared chamfers are C2.
5. Blunt acute angle.
6. Blunt sharp edges, remove burrs and flash.
1. There shall be no scratch, scratch and other defects damaging the part surface on the part processing surface.
2. The machined thread surface shall be free of defects such as black skin, bump, random buckle and burr.
Before painting, rust, scale, grease, dust, soil, salt and dirt must be removed from the surface of all steel parts to be painted.
3. Before derusting, remove grease and dirt on the surface of iron and steel parts with organic solvent, alkali solution, emulsifier and steam.
4. The time interval between the surface to be coated by shot peening or manual derusting and the primer shall not be more than 6h.
5. The surfaces of riveted parts in contact with each other must be coated with a thickness of 30 40 before connection M antirust paint. Lap edges shall be closed with paint, putty or adhesive. The primer damaged due to processing or welding shall be repainted.
3 Heat treatment of parts:
1. After quenching and tempering, HRC50 55.
2. Medium carbon steel: 45 or 40Cr parts are subject to high-frequency quenching, tempering at 350 370 , and hrc40 45.
3. Carburizing depth 0.3mm.
4. Carry out high temperature aging treatment.
4 Technical requirements after finishing
1. The finished parts shall not be placed directly on the ground, and necessary support and protection measures shall be taken. 2. The machined surface shall be free of rust, corrosion, bumps, scratches and other defects affecting performance, service life or appearance.
3. There shall be no peeling on the surface finished by rolling.
4. There shall be no oxide scale on the surface of the parts after heat treatment in the final process. The finished mating surface and tooth surface shall not be annealed
5 Sealing treatment of parts:
1. All seals must be soaked with oil before assembly.
2. Before assembly, strictly check and remove the sharp corners, burrs and foreign matters left during part processing. Ensure that the seal is not scratched during installation.
3. The excess adhesive flowing out shall be removed after bonding.
1. After the gear is assembled, the contact spots and backlash on the tooth surface shall comply with the provisions of GB10095 and gb11365.
2. The reference end face of the gear (worm gear) shall fit the shaft shoulder (or the end face of the positioning sleeve), and it cannot be checked with a 0.05mm feeler gauge. The perpendicularity between the gear reference end face and the axis shall be ensured.
3. The joint surface of gearbox and cover shall be in good contact.
1. The casting tolerance zone is symmetrical to the basic dimensional configuration of the blank casting.
2. Cold lap, crack, shrinkage cavity, penetrating defect and serious incomplete defect (such as under casting, mechanical damage, etc.) are not allowed on the casting surface.
3. The casting shall be cleaned without burrs and flash. The pouring and riser on the non machining indication shall be cleaned and flush with the casting surface.
4. The cast words and marks on the non machined surface of the casting shall be clear and legible, and the position and font shall meet the drawing requirements.
5. The roughness of non machined surface of casting, sand casting R, shall not be greater than 50 m
6. The pouring riser, flying thorn, etc. shall be removed from the casting. The residual amount of pouring and riser on the non machined surface shall be leveled and polished to meet the surface quality requirements.
7. The molding sand, core sand and core bone on the casting shall be removed.
8. The casting has inclined parts, and its dimensional tolerance zone shall be configured symmetrically along the inclined plane.
9. The molding sand, core sand, core bone, fleshy, sticky sand, etc. on the casting shall be shoveled, ground and cleaned.
10. The wrong type and boss casting deviation shall be corrected to achieve a smooth transition and ensure the appearance quality.
11. The wrinkle on the non machined surface of the casting shall be less than 2mm deep and the spacing shall be greater than 100mm.
12. The non machined surfaces of machine product castings shall be shot peened or roller treated to meet the requirements of cleanliness Sa21 / 2.
13. Castings must be water toughened.
14. The casting surface shall be flat, and the gate, burr, sand sticking, etc. shall be removed.
15. Casting defects such as cold shuts, cracks and holes that are detrimental to use are not allowed.
1. The nozzle and riser of each ingot shall have sufficient cutting amount to ensure that the forging has no shrinkage cavity and serious deflection.
2. Forgings shall be forged on a forging press with sufficient capacity to ensure full penetration in the forging.
3. Forgings are not allowed to have visible cracks, folds and other appearance defects affecting use. Local defects can be removed, but the cleaning depth shall not exceed 75% of the machining allowance. The defects on the non machined surface of forgings shall be cleaned and smoothly transition.
4. Forgings shall be free of white spots, internal cracks and residual shrinkage cavities.
2. The allowable deviation of unmarked length dimension is 0.5mm.
3. Unspecified fillet radius R5.
4. All undeclared chamfers are C2.
5. Blunt acute angle.
6. Blunt sharp edges, remove burrs and flash.
1. There shall be no scratch, scratch and other defects damaging the part surface on the part processing surface.
2. The machined thread surface shall be free of defects such as black skin, bump, random buckle and burr.
Before painting, rust, scale, grease, dust, soil, salt and dirt must be removed from the surface of all steel parts to be painted.
3. Before derusting, remove grease and dirt on the surface of iron and steel parts with organic solvent, alkali solution, emulsifier and steam.
4. The time interval between the surface to be coated by shot peening or manual derusting and the primer shall not be more than 6h.
5. The surfaces of riveted parts in contact with each other must be coated with a thickness of 30 40 before connection M antirust paint. Lap edges shall be closed with paint, putty or adhesive. The primer damaged due to processing or welding shall be repainted.
3 Heat treatment of parts:
1. After quenching and tempering, HRC50 55.
2. Medium carbon steel: 45 or 40Cr parts are subject to high-frequency quenching, tempering at 350 370 , and hrc40 45.
3. Carburizing depth 0.3mm.
4. Carry out high temperature aging treatment.
4 Technical requirements after finishing
1. The finished parts shall not be placed directly on the ground, and necessary support and protection measures shall be taken. 2. The machined surface shall be free of rust, corrosion, bumps, scratches and other defects affecting performance, service life or appearance.
3. There shall be no peeling on the surface finished by rolling.
4. There shall be no oxide scale on the surface of the parts after heat treatment in the final process. The finished mating surface and tooth surface shall not be annealed
5 Sealing treatment of parts:
1. All seals must be soaked with oil before assembly.
2. Before assembly, strictly check and remove the sharp corners, burrs and foreign matters left during part processing. Ensure that the seal is not scratched during installation.
3. The excess adhesive flowing out shall be removed after bonding.
1. After the gear is assembled, the contact spots and backlash on the tooth surface shall comply with the provisions of GB10095 and gb11365.
2. The reference end face of the gear (worm gear) shall fit the shaft shoulder (or the end face of the positioning sleeve), and it cannot be checked with a 0.05mm feeler gauge. The perpendicularity between the gear reference end face and the axis shall be ensured.
3. The joint surface of gearbox and cover shall be in good contact.
1. The casting tolerance zone is symmetrical to the basic dimensional configuration of the blank casting.
2. Cold lap, crack, shrinkage cavity, penetrating defect and serious incomplete defect (such as under casting, mechanical damage, etc.) are not allowed on the casting surface.
3. The casting shall be cleaned without burrs and flash. The pouring and riser on the non machining indication shall be cleaned and flush with the casting surface.
4. The cast words and marks on the non machined surface of the casting shall be clear and legible, and the position and font shall meet the drawing requirements.
5. The roughness of non machined surface of casting, sand casting R, shall not be greater than 50 m
6. The pouring riser, flying thorn, etc. shall be removed from the casting. The residual amount of pouring and riser on the non machined surface shall be leveled and polished to meet the surface quality requirements.
7. The molding sand, core sand and core bone on the casting shall be removed.
8. The casting has inclined parts, and its dimensional tolerance zone shall be configured symmetrically along the inclined plane.
9. The molding sand, core sand, core bone, fleshy, sticky sand, etc. on the casting shall be shoveled, ground and cleaned.
10. The wrong type and boss casting deviation shall be corrected to achieve a smooth transition and ensure the appearance quality.
11. The wrinkle on the non machined surface of the casting shall be less than 2mm deep and the spacing shall be greater than 100mm.
12. The non machined surfaces of machine product castings shall be shot peened or roller treated to meet the requirements of cleanliness Sa21 / 2.
13. Castings must be water toughened.
14. The casting surface shall be flat, and the gate, burr, sand sticking, etc. shall be removed.
15. Casting defects such as cold shuts, cracks and holes that are detrimental to use are not allowed.
1. The nozzle and riser of each ingot shall have sufficient cutting amount to ensure that the forging has no shrinkage cavity and serious deflection.
2. Forgings shall be forged on a forging press with sufficient capacity to ensure full penetration in the forging.
3. Forgings are not allowed to have visible cracks, folds and other appearance defects affecting use. Local defects can be removed, but the cleaning depth shall not exceed 75% of the machining allowance. The defects on the non machined surface of forgings shall be cleaned and smoothly transition.
4. Forgings shall be free of white spots, internal cracks and residual shrinkage cavities.
"CNC machining often has many advantages. From the perspective of automotive, aerospace and consumer applications, it is widely used in the manufacturing of components in these fields. And, in a way, it has similar properties to metal."
Polyformaldehyde, or POM, is a fascinating plastic resin that is widely used in various industrial fields. The aerospace, automotive and electronics industries are important consumers of this polymer. The processing of polyformaldehyde, especially when used in the manufacturing field, can achieve fast and efficient processing. In addition, it benefits users due to its high mechanical strength, stiffness, machinability and variety of grade choices.
This article contains the following key details of POM CNC machining, as well as its basic characteristics in terms of functions, applications, advantages, etc. Let's get started.
What is POM?
POM, a homopolymer, is also known as Delrin. It is widely adopted as an engineering grade thermoplastic for manufacturing prototypes for industrial use. It usually comes in two forms: copolymers or homopolymers. From complex prototypes to flexible machine parts, it brings economic benefits to manufacturing.
Product designers can benefit from its structural integrity, color diversity and stiffness characteristics. In addition, its reliability and resilience in wet environments make it suitable for Marine, medical and aerospace applications. POM, usually has some other name, such as; Acetal (acetal), polyacetal (polyacetal), polyformaldehyde, etc.
Why use POM for CNC machining?
POM formaldehyde or polyacetal has significant advantages when used in machining. Benefit from leading technologies such as precision machining POM or CNC machining; For example; Milling, drilling, punching and punching. In addition, its versatility in various grades is very beneficial for machining experts. Delrin is also compatible with advanced cutting technologies; Examples include laser cutting and extrusion processes.
Some of the main features of CNC machining include:
It is lightweight, wear-resistant and has low friction properties.
POM's low friction capability means it can be used in high-precision rotating parts, such as automotive bushings, bearings and gears.
POM is similar to acrylic because of its inherent optical transparency and crystallinity.
Delrin comes in a variety of textures, colors and grades.
POM CNC machining is essential for high volume production and runs efficiently.
It has a lower heat absorption rate compared to other grade polymers such as nylon and polyethylene.
Evolved into CNC POM prototyping, CNC machining plays a key role in prototyping.
Delrine or POM is also known as metallic plastic or super steel because of its high rigidity and strength.
POM can be efficiently milling, drilling, grooving and cutting with CNC machining.
Manufacturers can use it for a variety of applications such as aerospace, automotive and consumer goods.
Design engineers can benefit from its dimensional stability and achieve tighter tolerances of ±0.0005 inches.
Rapid prototyping with CNC machining is feasible.
CNC lathes are also available for POM machining.
It describes low-cost solutions and offers economic benefits when produced in large volumes.
POM is a common technique; For example; CNC machining, injection molding, and 3D printing.
Prototypes and complex geometric shapes are easier to manufacture with POM CNC machining.
POM numerical control machining method
Plastic CNC machining can be deployed through various technologies; For example; CNC milling, CNC drilling, lathes, grinding, blanking and punching. Its ease of processing greatly affects its use in these processes. In addition, it has also received a lot of attention for its high elongation. Now, let's discuss the method to get the best results POM CNC machining.
The process begins with computer-aided design and programming to improve accuracy, quality, and optimization levels. After the virtual configuration, the instructions are forwarded to the CNC machine in the following form: G code for further processing prospects.
A cutting operation is then performed on the workpiece material (POM) to obtain the optimal dimensions and dimensions. It is recommended to use coolant when machining Delrin at high speed to prevent ineffective processing operations such as chip buildup or overheating.
The following are some of the techniques commonly used to process strong polyformaldehyde or POM.
1.POM CNC milling
CNC milling is often used to machine POM parts. Tools with sharp edges help to get the best Angle, as well as surface finish. Therefore, it is reasonable to use a single slot milling cutter to process Delrin. These cutters prevent chip buildup during machining operations.
2.POM CNC drilling
Standard twist and center drills are best suited for processing polyformaldehyde resins. These materials have strong, sharpened edges that ultimately allow for smooth milling operations on Delrin. The optimal cutting speed of the drilled POM must be approximately 1500rpm and the lip torsion Angle 118°.
3.POM CNC turning
POM CNC turning operation is similar to brass turning operation. The best results can be achieved by maintaining high speed turning at the same rate as the medium feed rate. In order to prevent interference and excessive chip accumulation problems, a chip-breaker must be used for precision turning operations.
4. Blanking and punching
Blanking and stamping, both methods are preferred for small and medium-sized complex parts. During operation, cracks in the sheet can lead to major problems of improper processing. To eliminate this problem, it is best to preheat the Delrin plate and use a manual or high punch.
Highlights: "During POM CNC machining, it is important to keep the POM tight or hold the POM and use a hard steel or carbide tool.
List of Delrin grades for CNC machining
The two most common acetal grades are very useful for CNC machining; Polyformaldehyde resin 150, polyformaldehyde resin; 100 (AF). Let's evaluate their compatibility;
1. Delrin 150
Derlin 150 belongs to the acetal homopolymer family. It has high mechanical strength, stiffness and wear resistance. Thanks to these unique features, it is ideal for CNC machining of gears, bushings, gaskets and automotive interior and exterior finishes. In addition, its stability under high temperature conditions makes it ideal for irrigation and conveyor parts.
2. Delrin 100(A)
Delrin 100 A is integrated with polytetrafluoroethylene (PTFE) for enhanced mechanical stability and viscosity. It is widely used in gear systems or components that require low friction characteristics. In addition, it has strong moisture and chemical resistance. In addition, it eliminates the self-lubricating (oil or grease) characteristic, making it different from other Delrin grades.
Surface treatment options for POM
The desired surface finish plays a key role in the machining process. When it comes to surface treatment, two options are usually employed: machining and sandblasting. Here is a brief introduction to these;
After processing
CNC machining often leaves a bumpy surface or texture on the surface of the acetal part. When rough or textured parts are needed to improve the frictional properties of the parts, the surface treatment is preferred. The typical roughness range that can be achieved by machining is about 32 to 250 microinches (0.8 to 6.3 microns).
Pearl burst
In most cases, machining tools leave marks on acetal parts. Sandblasting is often used to prevent tool marks and enhance the visual effect of Delrin machined parts. It works by releasing glass beads or fine particles onto the surface of machined parts under high pressure. In addition, it improves durability and provides a valuable, smooth, matte, aesthetically pleasing and satin-polished appearance to polyformaldehyde resin machine parts.
There are other techniques; For example; Anodizing, polishing, painting and stamping. However, most design engineers prefer the above two options due to economic feasibility.
What are the limitations of Delrin CNC machining?
However, there are huge benefits to using Delrin for CNC machining. Besides, it also has some disadvantages. Here are Delrin's limitations;
Adhesion: Although acetal has excellent chemical resistance, it often presents challenges in bonding with strong adhesives. To overcome this problem, designers may need to employ post-treated surface options for best results.
Thermal sensitivity: Thermal sensitivity is a noteworthy issue for design manufacturers. The ability of acetone alcohols to withstand high temperature conditions is very significant. However, it is well suited for applications where mechanical stability is critical. But in some cases, when it is exposed to high temperature conditions, there will be deformation or distortion problems. Compared with nylon, nylon shows higher strength and structural strength even in harsh environments.
High flammability: The processing of polyformaldehyde resin faces the challenge of flammability. It is sensitive to temperatures above 121 degrees Celsius. It is recommended to always use a coolant, such as air coolant, to maintain the temperature during the processing operation. In order to overcome or control flammability problems, it is also necessary to use A Class A fire extinguisher when processing POM.
Delrin NC machining applications
From automotive interiors to aerospace components, Drin is used in a wide range of applications. Let's take a look at some of its key applications in manufacturing;
Medical industry
POM is an important material for medical components or equipment. As an engineered thermoplastic, it meets the strict quality standards of the FDA or ISO. Its applications range from enclosures and housings to complex functional components; For example; Disposable syringes, surgical tools, valves, inhalers, prosthetics and medical implants.
Automobile industry
Derlin supplies a wide range of automotive components to the automotive industry. Its high mechanical strength, low friction, and wear resistance allow engineers to use it to make important car, motorcycle, and electric vehicle parts. Some common examples include: articulated housings, locking systems, and fuel transmitter units.
Consumer appliances
When it comes to convenient applications, polyformaldehyde processing describes several significant benefits. Manufacturing experts use it to make zippers, cooking utensils, washing machines and clips.
Industrial machinery parts
Derlin's great strength enables it to be used in industrial parts manufacturing. Its ability to withstand wear and low friction characteristics makes it ideal for components such as springs, fan wheels, gears, housings, scrapers and rollers.
As an industry pioneer, Honscn is always at the forefront of market developments. We know that in the fierce market competition, only by constantly honing ourselves can we create indestructible competitiveness. Therefore, we adhere to technological innovation and integrate scientific management into every production link to ensure that every step is accurate. We not only focus on the pulse of the domestic market, but also in line with international standards, with a global perspective to examine the industry trend, grasp the pulse of The Times. With an open mind, embrace the world, with excellent quality, win the future!
Please feel free to contact us to discuss your project needs!
Polyformaldehyde, or POM, is a fascinating plastic resin that is widely used in various industrial fields. The aerospace, automotive and electronics industries are important consumers of this polymer. The processing of polyformaldehyde, especially when used in the manufacturing field, can achieve fast and efficient processing. In addition, it benefits users due to its high mechanical strength, stiffness, machinability and variety of grade choices.
This article contains the following key details of POM CNC machining, as well as its basic characteristics in terms of functions, applications, advantages, etc. Let's get started.
What is POM?
POM, a homopolymer, is also known as Delrin. It is widely adopted as an engineering grade thermoplastic for manufacturing prototypes for industrial use. It usually comes in two forms: copolymers or homopolymers. From complex prototypes to flexible machine parts, it brings economic benefits to manufacturing.
Product designers can benefit from its structural integrity, color diversity and stiffness characteristics. In addition, its reliability and resilience in wet environments make it suitable for Marine, medical and aerospace applications. POM, usually has some other name, such as; Acetal (acetal), polyacetal (polyacetal), polyformaldehyde, etc.
Why use POM for CNC machining?
POM formaldehyde or polyacetal has significant advantages when used in machining. Benefit from leading technologies such as precision machining POM or CNC machining; For example; Milling, drilling, punching and punching. In addition, its versatility in various grades is very beneficial for machining experts. Delrin is also compatible with advanced cutting technologies; Examples include laser cutting and extrusion processes.
Some of the main features of CNC machining include:
It is lightweight, wear-resistant and has low friction properties.
POM's low friction capability means it can be used in high-precision rotating parts, such as automotive bushings, bearings and gears.
POM is similar to acrylic because of its inherent optical transparency and crystallinity.
Delrin comes in a variety of textures, colors and grades.
POM CNC machining is essential for high volume production and runs efficiently.
It has a lower heat absorption rate compared to other grade polymers such as nylon and polyethylene.
Evolved into CNC POM prototyping, CNC machining plays a key role in prototyping.
Delrine or POM is also known as metallic plastic or super steel because of its high rigidity and strength.
POM can be efficiently milling, drilling, grooving and cutting with CNC machining.
Manufacturers can use it for a variety of applications such as aerospace, automotive and consumer goods.
Design engineers can benefit from its dimensional stability and achieve tighter tolerances of ±0.0005 inches.
Rapid prototyping with CNC machining is feasible.
CNC lathes are also available for POM machining.
It describes low-cost solutions and offers economic benefits when produced in large volumes.
POM is a common technique; For example; CNC machining, injection molding, and 3D printing.
Prototypes and complex geometric shapes are easier to manufacture with POM CNC machining.
POM numerical control machining method
Plastic CNC machining can be deployed through various technologies; For example; CNC milling, CNC drilling, lathes, grinding, blanking and punching. Its ease of processing greatly affects its use in these processes. In addition, it has also received a lot of attention for its high elongation. Now, let's discuss the method to get the best results POM CNC machining.
The process begins with computer-aided design and programming to improve accuracy, quality, and optimization levels. After the virtual configuration, the instructions are forwarded to the CNC machine in the following form: G code for further processing prospects.
A cutting operation is then performed on the workpiece material (POM) to obtain the optimal dimensions and dimensions. It is recommended to use coolant when machining Delrin at high speed to prevent ineffective processing operations such as chip buildup or overheating.
The following are some of the techniques commonly used to process strong polyformaldehyde or POM.
1.POM CNC milling
CNC milling is often used to machine POM parts. Tools with sharp edges help to get the best Angle, as well as surface finish. Therefore, it is reasonable to use a single slot milling cutter to process Delrin. These cutters prevent chip buildup during machining operations.
2.POM CNC drilling
Standard twist and center drills are best suited for processing polyformaldehyde resins. These materials have strong, sharpened edges that ultimately allow for smooth milling operations on Delrin. The optimal cutting speed of the drilled POM must be approximately 1500rpm and the lip torsion Angle 118°.
3.POM CNC turning
POM CNC turning operation is similar to brass turning operation. The best results can be achieved by maintaining high speed turning at the same rate as the medium feed rate. In order to prevent interference and excessive chip accumulation problems, a chip-breaker must be used for precision turning operations.
4. Blanking and punching
Blanking and stamping, both methods are preferred for small and medium-sized complex parts. During operation, cracks in the sheet can lead to major problems of improper processing. To eliminate this problem, it is best to preheat the Delrin plate and use a manual or high punch.
Highlights: "During POM CNC machining, it is important to keep the POM tight or hold the POM and use a hard steel or carbide tool.
List of Delrin grades for CNC machining
The two most common acetal grades are very useful for CNC machining; Polyformaldehyde resin 150, polyformaldehyde resin; 100 (AF). Let's evaluate their compatibility;
1. Delrin 150
Derlin 150 belongs to the acetal homopolymer family. It has high mechanical strength, stiffness and wear resistance. Thanks to these unique features, it is ideal for CNC machining of gears, bushings, gaskets and automotive interior and exterior finishes. In addition, its stability under high temperature conditions makes it ideal for irrigation and conveyor parts.
2. Delrin 100(A)
Delrin 100 A is integrated with polytetrafluoroethylene (PTFE) for enhanced mechanical stability and viscosity. It is widely used in gear systems or components that require low friction characteristics. In addition, it has strong moisture and chemical resistance. In addition, it eliminates the self-lubricating (oil or grease) characteristic, making it different from other Delrin grades.
Surface treatment options for POM
The desired surface finish plays a key role in the machining process. When it comes to surface treatment, two options are usually employed: machining and sandblasting. Here is a brief introduction to these;
After processing
CNC machining often leaves a bumpy surface or texture on the surface of the acetal part. When rough or textured parts are needed to improve the frictional properties of the parts, the surface treatment is preferred. The typical roughness range that can be achieved by machining is about 32 to 250 microinches (0.8 to 6.3 microns).
Pearl burst
In most cases, machining tools leave marks on acetal parts. Sandblasting is often used to prevent tool marks and enhance the visual effect of Delrin machined parts. It works by releasing glass beads or fine particles onto the surface of machined parts under high pressure. In addition, it improves durability and provides a valuable, smooth, matte, aesthetically pleasing and satin-polished appearance to polyformaldehyde resin machine parts.
There are other techniques; For example; Anodizing, polishing, painting and stamping. However, most design engineers prefer the above two options due to economic feasibility.
What are the limitations of Delrin CNC machining?
However, there are huge benefits to using Delrin for CNC machining. Besides, it also has some disadvantages. Here are Delrin's limitations;
Adhesion: Although acetal has excellent chemical resistance, it often presents challenges in bonding with strong adhesives. To overcome this problem, designers may need to employ post-treated surface options for best results.
Thermal sensitivity: Thermal sensitivity is a noteworthy issue for design manufacturers. The ability of acetone alcohols to withstand high temperature conditions is very significant. However, it is well suited for applications where mechanical stability is critical. But in some cases, when it is exposed to high temperature conditions, there will be deformation or distortion problems. Compared with nylon, nylon shows higher strength and structural strength even in harsh environments.
High flammability: The processing of polyformaldehyde resin faces the challenge of flammability. It is sensitive to temperatures above 121 degrees Celsius. It is recommended to always use a coolant, such as air coolant, to maintain the temperature during the processing operation. In order to overcome or control flammability problems, it is also necessary to use A Class A fire extinguisher when processing POM.
Delrin NC machining applications
From automotive interiors to aerospace components, Drin is used in a wide range of applications. Let's take a look at some of its key applications in manufacturing;
Medical industry
POM is an important material for medical components or equipment. As an engineered thermoplastic, it meets the strict quality standards of the FDA or ISO. Its applications range from enclosures and housings to complex functional components; For example; Disposable syringes, surgical tools, valves, inhalers, prosthetics and medical implants.
Automobile industry
Derlin supplies a wide range of automotive components to the automotive industry. Its high mechanical strength, low friction, and wear resistance allow engineers to use it to make important car, motorcycle, and electric vehicle parts. Some common examples include: articulated housings, locking systems, and fuel transmitter units.
Consumer appliances
When it comes to convenient applications, polyformaldehyde processing describes several significant benefits. Manufacturing experts use it to make zippers, cooking utensils, washing machines and clips.
Industrial machinery parts
Derlin's great strength enables it to be used in industrial parts manufacturing. Its ability to withstand wear and low friction characteristics makes it ideal for components such as springs, fan wheels, gears, housings, scrapers and rollers.
As an industry pioneer, Honscn is always at the forefront of market developments. We know that in the fierce market competition, only by constantly honing ourselves can we create indestructible competitiveness. Therefore, we adhere to technological innovation and integrate scientific management into every production link to ensure that every step is accurate. We not only focus on the pulse of the domestic market, but also in line with international standards, with a global perspective to examine the industry trend, grasp the pulse of The Times. With an open mind, embrace the world, with excellent quality, win the future!
Please feel free to contact us to discuss your project needs!
If you are new to the world of CNC machines or want to get information on the latest happenings in the CNC industry then you definitely need to be a part of the CNC machining zone. You can use various methods to seek out like-minded people that have advice to offer or need advice and can stay connected to the world of CNC machines.
Different methods to stay in touch You can subscribe to newsletters if you are a member of any association related to the CNC industry. This will help you to get the latest news in your industry. With the advent of the Internet it is also possible to search for various websites that offer a forum for like-minded people to come together to exchange their views on each aspect of the CNC industry, be it on CNC lathes, CNC routers, CNC engravers, CNC cutters or even on accessories such as spindles, chucks, etc. Training methods, programming, upgrading and expert advice on niggling problems can also be discussed on a real-time basis.
Various modes of extracting information in the CNC machining zone In addition to participating in blogs and receiving online newsletters over the Internet, you can also watch videos of various CNC machines and their functions, such as the 4 or 5 axis CNC lathes, CNC pipe bending machines, etc. You can also download e-books from various websites that offer invaluable advice and tips on various types of CNC machines in great detail. Many online zones also offer vital links to other sites that could help in the procurement or maintenance of CNC machines.
Participate in online forums One of the best methods of gaining knowledge about your industry is to participate in online forums. You can post your queries or narrate specific problems related to your CNC machine and get responses from various quarters. This could help you to view various solutions and choose the one that suits your specific situation. As time goes by, you can also offer advice to fellow members and also enhance your name in the CNC industry as an expert.
Use the CNC machining zone to procure machines, material and manpower You can save a lot on manufacturing and recurring costs by using the CNC machining zone to procure the right types of CNC machines and raw materials to make your production much more cost-efficient. You can also look for talented workers in this zone that can help run your machine at peak efficiency. You can now locate molds, cast-iron, stainless steel or aluminum blocks, support blocks, controllers, motors, etc without any difficulty. You can also outsource certain aspects of your work if you do not have the required resources, thus helping you to complete your orders without indulging in heavy investments or failing to complete your work on time.
You are certain to benefit by entering the CNC machining zone since other members of your industry could willingly help you out of your cutting, milling or grinding problems. You will also be able to locate new suppliers, clients and meet new people that can help your business to attain a cutting edge in these tough and competitive times.
Different methods to stay in touch You can subscribe to newsletters if you are a member of any association related to the CNC industry. This will help you to get the latest news in your industry. With the advent of the Internet it is also possible to search for various websites that offer a forum for like-minded people to come together to exchange their views on each aspect of the CNC industry, be it on CNC lathes, CNC routers, CNC engravers, CNC cutters or even on accessories such as spindles, chucks, etc. Training methods, programming, upgrading and expert advice on niggling problems can also be discussed on a real-time basis.
Various modes of extracting information in the CNC machining zone In addition to participating in blogs and receiving online newsletters over the Internet, you can also watch videos of various CNC machines and their functions, such as the 4 or 5 axis CNC lathes, CNC pipe bending machines, etc. You can also download e-books from various websites that offer invaluable advice and tips on various types of CNC machines in great detail. Many online zones also offer vital links to other sites that could help in the procurement or maintenance of CNC machines.
Participate in online forums One of the best methods of gaining knowledge about your industry is to participate in online forums. You can post your queries or narrate specific problems related to your CNC machine and get responses from various quarters. This could help you to view various solutions and choose the one that suits your specific situation. As time goes by, you can also offer advice to fellow members and also enhance your name in the CNC industry as an expert.
Use the CNC machining zone to procure machines, material and manpower You can save a lot on manufacturing and recurring costs by using the CNC machining zone to procure the right types of CNC machines and raw materials to make your production much more cost-efficient. You can also look for talented workers in this zone that can help run your machine at peak efficiency. You can now locate molds, cast-iron, stainless steel or aluminum blocks, support blocks, controllers, motors, etc without any difficulty. You can also outsource certain aspects of your work if you do not have the required resources, thus helping you to complete your orders without indulging in heavy investments or failing to complete your work on time.
You are certain to benefit by entering the CNC machining zone since other members of your industry could willingly help you out of your cutting, milling or grinding problems. You will also be able to locate new suppliers, clients and meet new people that can help your business to attain a cutting edge in these tough and competitive times.
PETALING JAYA: Low-profile Datuk Gan Kim Huat is consolidating his businesses in two listed companies, SKP Resources Bhd and Tecnic Group Bhd, in a move that will pave the way for the establishment of a major plastic parts manufacturer.
Yesterday, the share prices of SKP and Tecnic climbed to all-time highs of 71 sen and RM5.08, respectively, before both stocks were suspended, "pending a material announcement".
It is learnt that the merger and acquisition exercise could involve cash and the issuance of new SKP shares.
Gan and his family own about 67% in SKP and 69% in Tecnic, formerly known as STS Tecnic Bhd.
"It's a move that the Gan family has been looking at for some time to create an entity with economies of scale. A merger can be synergistic for the two companies, which can lead to accretive earnings going forward," said a source.
SKP, which has been on expansion mode over the past few years, is in the business of manufacturing plastic parts and components, contract manufacturing, precision mould making, the sub-assembly of electronic and electrical equipment and other secondary processes.
For the financial year ended March 31, 2013 (FY13), British electrical appliance brand Dyson contributed 55% to SKP's total sales.
According to SKP's website, its other clients include Hewlett-Packard, Sharp, Flextronics and Pioneer.
Tecnic, meanwhile, is involved in plastic moulding design and fabrication, plastic injection and blow moulding for the automotive, electrical and electronic sectors as well as industrial consumable products. It counts Valeo, Sharp, Panasonic, Denso, Suzuki, Proton and Perodua as its clients.
SKP and Tecnic had cash and cash equivalents of RM19.4mil and RM25.7mil, respectively, as at June 30. However, SKP has seen a higher trading volume in recent months, while Tecnic is a relatively tightly held stock.
In an earlier note, RHB Research said SKP could achieve a two-year earnings compounded annual growth rate of 57.9% on the back of a 75% expansion in capacity to cater to increasing orders from Dyson.
SKP has a new plant in Senai, Johor, which is slated for completion next month and achieve full-scale operations by FY17, Kenanga Research said in a separate report.
The research house noted that SKP's stronger order-book, underpinned by orders from Dyson to manufacture two new product lines for vacuum cleaners and fans, will provide earnings visibility for the next few years.
"The new products are next-generation appliances that will be able to fetch higher margins and contribute to the group's earnings. We understand that a major part of the group's new plant will cater to the production of the two new products," it added.
SKP jumped 10.5 sen to 71 sen, with 38.37 million shares being traded.
Tecnic rose 31 sen, or 6.5%, to RM5.08, with 219,500 shares changing hands.
Yesterday, the share prices of SKP and Tecnic climbed to all-time highs of 71 sen and RM5.08, respectively, before both stocks were suspended, "pending a material announcement".
It is learnt that the merger and acquisition exercise could involve cash and the issuance of new SKP shares.
Gan and his family own about 67% in SKP and 69% in Tecnic, formerly known as STS Tecnic Bhd.
"It's a move that the Gan family has been looking at for some time to create an entity with economies of scale. A merger can be synergistic for the two companies, which can lead to accretive earnings going forward," said a source.
SKP, which has been on expansion mode over the past few years, is in the business of manufacturing plastic parts and components, contract manufacturing, precision mould making, the sub-assembly of electronic and electrical equipment and other secondary processes.
For the financial year ended March 31, 2013 (FY13), British electrical appliance brand Dyson contributed 55% to SKP's total sales.
According to SKP's website, its other clients include Hewlett-Packard, Sharp, Flextronics and Pioneer.
Tecnic, meanwhile, is involved in plastic moulding design and fabrication, plastic injection and blow moulding for the automotive, electrical and electronic sectors as well as industrial consumable products. It counts Valeo, Sharp, Panasonic, Denso, Suzuki, Proton and Perodua as its clients.
SKP and Tecnic had cash and cash equivalents of RM19.4mil and RM25.7mil, respectively, as at June 30. However, SKP has seen a higher trading volume in recent months, while Tecnic is a relatively tightly held stock.
In an earlier note, RHB Research said SKP could achieve a two-year earnings compounded annual growth rate of 57.9% on the back of a 75% expansion in capacity to cater to increasing orders from Dyson.
SKP has a new plant in Senai, Johor, which is slated for completion next month and achieve full-scale operations by FY17, Kenanga Research said in a separate report.
The research house noted that SKP's stronger order-book, underpinned by orders from Dyson to manufacture two new product lines for vacuum cleaners and fans, will provide earnings visibility for the next few years.
"The new products are next-generation appliances that will be able to fetch higher margins and contribute to the group's earnings. We understand that a major part of the group's new plant will cater to the production of the two new products," it added.
SKP jumped 10.5 sen to 71 sen, with 38.37 million shares being traded.
Tecnic rose 31 sen, or 6.5%, to RM5.08, with 219,500 shares changing hands.
no data
more products
Send your inquiry
you might like
no data
Contact us
we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.
Copyright © 2025 HONSCN |Sitemap Privacy Policy