We are committed to delivering exceptional cnc machining parts's design and performance for customers home and abroad. It is a featured product of Honscn Co.,Ltd. Its production process has been improved by our R&D team to maximize its performance. Moreover, the product has been tested by a third-party authoritative agency, which has great guarantees on high quality and stable functionality.
Decades past, the HONSCN name and logo have become renowned for providing quality and exemplary products. Comes with better reviews and feedback, these products have more satisfied customers and increased value in the market. They make us build and maintain relationships with a number of prestigious brands around the world. '... we really feel fortunate to have identified HONSCN as our partner,' one of our customers says.
What differentiates us from competitors that operate nationally is our service system. At Honscn, with after-sales personnel fully trained, our services are considered to be considerate and wistful. The services we provide include customization for cnc machining parts.
No machine can be made without holes. To connect the parts together, a variety of different sizes of screw holes, pin holes or rivet holes are required; In order to fix the transmission parts, various mounting holes are needed; The machine parts themselves also have many kinds of holes (such as oil holes, process holes, weight reduction holes, etc.). The operation of machining holes so that the holes meet the requirements is called hole machining.
The surface of the inner hole is one of the important surfaces of the mechanical parts. In mechanical parts, parts with holes generally account for 50% to 80% of the total number of parts. The types of holes are also diverse, there are cylindrical holes, conical holes, threaded holes and shaped holes. Common cylindrical holes are divided into general holes and deep holes, and deep holes are difficult to process.
Advantages of U drill
1. First of all, the difference between U drill and ordinary drill is that U drill uses the peripheral blade and the center blade, at this Angle, the relationship between U drill and ordinary hard drill is actually similar to the relationship between the machine clamping turning tool and the welding turning tool, and the blade can be replaced directly after the tool is worn without regrinding. After all, the use of indexable blades still saves material than the whole hard drill, and the consistency of the blade makes it easier to control the size of the part.
2. The rigidity of U drill is better, you can use a high feed rate, and the processing diameter of U drill is much larger than that of ordinary drill, the maximum can reach D50~60mm, of course, U drill can not be too small due to the characteristics of the blade.
3.U drill encounter a variety of materials only need to replace the same type of different grades of blade, hard drill is not so convenient.
4. Compared with hard drilling, the precision of the hole drilled by U drilling is still higher, and the finish is better, especially when the cooling and lubrication are not smooth, it is more obvious, and U drilling can correct the position accuracy of the hole, and hard drilling can not be done, and U drilling can be used as a bore knife.
Advantages of U drill in CNC machining
1. U drill can punch holes on surfaces with inclination angles less than 30~ without reducing cutting parameters.
2. After the cutting parameters of U drilling are reduced by 30%, intermittent cutting can be achieved, such as processing intersecting holes, intersecting holes, and phase perforation.
3. U drilling can realize the drilling of multi-step holes, and can boring, chamfer, eccentric drilling.
4. When drilling, the drilling chips are mostly short chips, and the internal cooling system can be used for safe chip removal, without cleaning the chips on the tool, which is conducive to the continuity of the processing of the product, shorten the processing time and improve efficiency.
5. Under the condition of standard length-diameter ratio, no chip removal is required when drilling with U drill.
6. U drill for indexable tool, blade wear without sharpening, more convenient replacement, and low cost.
7. The surface roughness value of the hole processed by U drilling is small, and the tolerance range is small, which can replace the work of some boring tools.
8. The use of U drilling does not need to pre-punch the center hole, and the blind hole bottom surface processed is relatively straight, eliminating the flat-bottom drill.
9. The use of U drilling technology can not only reduce drilling tools, and because U drilling is the head of the cemented carbide blade, its cutting life is more than ten times the ordinary drill, at the same time, there are four cutting edges on the blade, blade wear can be replaced at any time cutting, the new cutting saves a lot of grinding and replacing the tool time, can improve the average efficiency 6-7 times.
U drill in the use of CNC machine tools skills
1. When using U drill, the rigidity of the machine tool and the neutrality of the tool and the workpiece are high, so U drill is suitable for use on high-power, high-rigidity and high-speed CNC machine tools.
2. When using U drilling, the center blade should be used with good toughness, and the peripheral blade should be used with relatively sharp blades.
3. When processing different materials, should choose different groove blade, under normal circumstances, small feed, small tolerance, U drilling length to diameter ratio, choose the groove blade with smaller cutting force, on the contrary, rough machining, large tolerance, U drilling length to diameter ratio is small, then choose the groove blade with larger cutting force.
4. When using U drilling, we must consider the power of the machine tool spindle, the stability of U drilling clamping, the pressure and flow of cutting fluid, and control the chip removal effect of U drilling, otherwise it will greatly affect the surface roughness and dimensional accuracy of the hole.
5. When installing the U drill, it is necessary to make the U drill center coincide with the center of the workpiece and be perpendicular to the surface of the workpiece.
6. When using U drilling, the appropriate cutting parameters should be selected according to different parts materials.
7. When drilling test cutting, be sure not to reduce the feed or speed at will because of caution and fear, so that the U drill blade is damaged or the U drill is damaged.
8. When using U-drill processing, when the blade is worn or damaged, it is necessary to carefully analyze the reasons and replace the blade with better toughness or more wear-resistant.
9. When using U drill to process step holes, it is necessary to start processing from large holes and then process small holes.
10. When drilling, pay attention to the cutting fluid to have enough pressure in order to flush out the chips.
11. The blade used on the center and edge of the U drill is different, must not be misused, otherwise it will damage the U drill rod.
12. When drilling with U-drill, workpiece rotation, tool rotation, and simultaneous rotation of the tool and workpiece can be used, but when the tool is moved in a linear feed mode, the most common method is to use the workpiece rotation mode.
13. The performance of the lathe should be considered when machining on the CNC car, and the cutting parameters should be adjusted appropriately, generally reducing the speed and low feed.
U drill in CNC machining often appear problems
1. The blade is damaged too fast, easy to break, and the processing cost increases.
2. A harsh whistle is emitted during processing, and the cutting state is abnormal.
3. Machine jitter, affecting the machining accuracy of machine tools.
U drill use points to note
1. The installation of U drill should pay attention to the positive and negative directions, which blade is up, which blade is down, which is facing inside and which is facing outside.
2. The center height of U drilling must be corrected, according to its diameter size to require the control range, generally controlled within 0.1mm, the smaller the diameter of U drilling, the higher the center height requirements, the center height is not good U drilling two sides will wear, the aperture will be larger, the blade service life will be shortened, small U drilling is easy to break.
3. U drill has very high requirements for coolant, it must be ensured that the coolant is emitted from the center of U drill, the greater the pressure of the coolant, the better, the excess water outlet of the tower can be blocked up to ensure its pressure.
4, U drilling cutting parameters in strict accordance with the manufacturer's instructions, but also to consider different brands of blades, machine power, processing can refer to the load value of the machine tool size, make appropriate adjustments, generally using high speed, low feed.
5.U drill blade to check often, timely replacement, different blades can not be installed reverse.
6. According to the hardness of the workpiece and the length of the tool suspension to adjust the feed amount, the harder the workpiece, the larger the tool suspension, the smaller the cutting amount.
7. Do not use excessive wear of the blade, should be recorded in the production of blade wear and the relationship between the number of workpieces can be machined, timely replacement of new blades.
8. Use sufficient internal coolant with correct pressure. The main function of the coolant is chip removal and cooling.
9.U drill can not be used for processing softer materials, such as copper, soft aluminum, etc.
Honscn has more than ten years of cnc machining experience, specializing in cnc machining, hardware mechanical parts processing, automation equipment parts processing. Robot parts processing, UAV parts processing, bicycle parts processing, medical parts processing, etc. It is one of the high-quality suppliers of cnc machining. At present, the company has more than 50 sets of cnc machining centers, grinding machines, milling machines, high-quality high-precision testing equipment, to provide customers with precision and high-quality cnc spare parts processing services.
Thread machining is one of the very important applications of CNC machining center. The machining quality and efficiency of thread will directly affect the machining quality of parts and the production efficiency of machining center.With the improvement of the performance of CNC machining center and the improvement of cutting tools, the method of thread machining is also improving, and the accuracy and efficiency of thread machining are also gradually improving. In order to enable technicians to reasonably select thread processing methods in processing, improve production efficiency and avoid quality accidents, several thread processing methods commonly used in CNC machining center are summarized as follows:1. Tap processing method
1.1 classification and characteristics of tap processingUsing tap to process threaded hole is the most commonly used processing method. It is mainly applicable to threaded holes with small diameter (d30) and low requirements for hole position accuracy.
In the 1980s, the flexible tapping method was adopted for threaded holes, that is, the flexible tapping collet was used to clamp the tap. The tapping collet can be used for axial compensation to compensate the feed error caused by the non synchronization between the axial feed of the machine tool and the spindle speed, so as to ensure the correct pitch. The flexible tapping collet has complex structure, high cost, easy damage and low processing efficiency. In recent years, the performance of CNC machining center Gradually, the rigid tapping function has become the basic configuration of CNC machining center.
Therefore, rigid tapping has become the main method of thread machining.That is, the tap is clamped with a rigid spring collet, and the feed of the spindle is consistent with the spindle speed controlled by the machine tool.Compared with the flexible tapping chuck, the spring chuck has the advantages of simple structure, low price and wide application. In addition to holding the tap, it can also hold the end milling cutter, drill bit and other tools, which can reduce the tool cost. At the same time, the rigid tapping can be used for high-speed cutting, improve the use efficiency of the processing center and reduce the manufacturing cost.
1.2 determination of threaded bottom hole before tappingThe processing of threaded bottom hole has a great impact on the life of tap and the quality of thread processing. Generally, the diameter of threaded bottom hole drill is close to the upper limit of the diameter tolerance of threaded bottom hole,For example, the bottom hole diameter of M8 threaded hole is 6.7 0.27mm, select the drill bit diameter as 6.9mm. In this way, the machining allowance of tap can be reduced, the load of tap can be reduced, and the service life of tap can be improved.
1.3 selection of tapWhen selecting taps, first of all, the corresponding taps must be selected according to the processed materials. The tool company produces different types of taps according to different processing materials, and special attention should be paid to the selection.
Because the tap is very sensitive to the processed materials compared with the milling cutter and boring cutter. For example, using the tap for processing cast iron to process aluminum parts is easy to cause thread dropping, disorderly threading and even tap breaking, resulting in workpiece scrapping. Secondly, pay attention to the difference between the through-hole tap and the blind hole tap. The front-end guide of the through-hole tap is long, and the chip removal is the front-end chip. The front-end guide of the blind hole is short, and the chip removal is the front-end It is the back chip. Machining the blind hole with a through-hole tap cannot guarantee the thread machining depth. Moreover, if a flexible tapping collet is used, it should also be noted that the diameter of the tap handle and the width of the four sides should be the same as that of the tapping collet; the diameter of the tap handle for rigid tapping should be the same as that of the spring jacket. In short, only a reasonable selection of the tap can ensure the smooth machining.
1.4 NC programming of tap machiningThe programming of tap machining is relatively simple. Now the machining center generally solidifies the tapping subroutine and only needs to assign values to various parameters. However, it should be noted that the meaning of some parameters is different due to different NC systems and different subroutine formats.For example, the programming format of Siemens 840C control system is g84 x_y_r2_r3_r4_r5_r6_r7_r8_r9_r10_r13_. Only these 12 parameters need to be assigned during programming.
2. Thread milling method2.1 characteristics of thread millingThread milling adopts thread milling tool and three-axis linkage of machining center, that is, x-axis and y-axis arc interpolation and z-axis linear feed.
Thread milling is mainly used to process large hole threads and threaded holes of difficult to process materials. It mainly has the following characteristics:(1) high processing speed, high efficiency and high processing precision. The tool material is generally cemented carbide, with fast tool walking speed. The manufacturing precision of the tool is high, so the milling thread precision is high.(2) the milling tool has a wide range of application. As long as the pitch is the same, whether it is left-hand thread or right-hand thread, one tool can be used, which is conducive to reducing the tool cost.
(3) milling is easy to remove chips and cool, and the cutting condition is better than that of tap. It is especially suitable for thread processing of difficult to process materials such as aluminum, copper and stainless steel, especially for thread processing of large parts and components of precious materials, which can ensure the thread processing quality and workpiece safety.(4) because there is no tool front-end guide, it is suitable for machining blind holes with short thread bottom holes and holes without tool return grooves.2.2 classification of thread milling tools
Thread milling tools can be divided into two types, one is the machine clamp cemented carbide blade milling cutter, and the other is the integral cemented carbide milling cutter. The machine clamp cutter has a wide range of applications. It can process holes with thread depth less than the blade length or holes with thread depth greater than the blade length. The integral cemented carbide milling cutter is generally used to process holes with thread depth less than the tool length.2.3 NC programming of thread millingThe programming of thread milling tool is different from that of other tools. If the processing program is wrong, it is easy to cause tool damage or thread processing error. The following points should be paid attention to during programming:
(1) firstly, the threaded bottom hole shall be processed well, the small diameter hole shall be processed with a drill, and the larger hole shall be bored to ensure the accuracy of the threaded bottom hole.(2) when cutting in and cutting out the tool, the arc path shall be adopted, usually 1 / 2 turn, and 1 / 2 pitch shall be traveled in the z-axis direction to ensure the thread shape. The tool radius compensation value shall be brought in at this time.(3) the x-axis and y-axis circular arc shall be interpolated for one week, and the main shaft shall travel a pitch along the z-axis direction, otherwise the threads will be buckled disorderly.
(4) specific example program: the diameter of thread milling cutter is 16. The threaded hole is M48 1.5, the depth of threaded hole is 14.The processing procedure is as follows:(the procedure of threaded bottom hole is omitted, and the bottom hole shall be bored) G0 G90 g54 x0 y0g0 Z10 m3 s1400 m8g0 z-14.75 feed to the deepest thread G01 G41 x-16 Y0 F2000 move to the feed position, add radius compensation G03 x24 Y0 z-14 I20 J0 f500 cut in with 1 / 2 circle of arc G03 x24 Y0 Z0 I-24 J0 F400 cut the whole thread G03 x-16 Y0 z0.75 I-20 J0 f500 cut out with 1 / 2 circle of arc G01 G40 x0 Y0 return to the center and cancel radius compensation G0 Z100M30
3. Snap method3.1 characteristics of snap methodLarge threaded holes can sometimes be encountered on box parts. In the absence of tap and thread milling cutter, the method similar to lathe pick-up can be adopted.
Install the thread turning tool on the boring bar to bore the thread.The company once processed a batch of parts with m52x1.5 thread and 0.1mm positional degree (see Figure 1). Because of the high positional requirements and large thread hole, it is impossible to process with tap and there is no thread milling cutter. After the test, the thread picking method is adopted to ensure the processing requirements.3.2 precautions for buckle picking method
(1) after the spindle is started, there shall be a delay time to ensure that the spindle reaches the rated speed.(2) during tool retraction, if it is a hand ground thread tool, because the tool cannot be grinded symmetrically, reverse tool retraction cannot be adopted. The spindle orientation must be adopted, the tool moves radially, and then the tool retraction.(3) the manufacturing of the cutter bar must be accurate, especially the position of the cutter slot must be consistent. If it is inconsistent, multiple cutter bars cannot be used for processing, otherwise it will cause disorderly buckle.
(4) even if it is a very fine buckle, it cannot be picked with one knife, otherwise it will cause tooth loss and poor surface roughness. At least two knives shall be divided.(5) the processing efficiency is low, which is only applicable to single piece, small batch, special pitch thread and no corresponding tool.3.3 specific procedures
N5 G90 G54 G0 X0 Y0N10 Z15N15 S100 M3 M8
N20 G04 X5 delay to make the spindle reach the rated speedN25 G33 z-50 K1.5 turnbuckleN30 M19 spindle orientation
N35 G0 X-2 cutterN40 G0 z15 tool retractionEditing: JQ
Yesterday, the share prices of SKP and Tecnic climbed to all-time highs of 71 sen and RM5.08, respectively, before both stocks were suspended, "pending a material announcement".
It is learnt that the merger and acquisition exercise could involve cash and the issuance of new SKP shares.
Gan and his family own about 67% in SKP and 69% in Tecnic, formerly known as STS Tecnic Bhd.
"It's a move that the Gan family has been looking at for some time to create an entity with economies of scale. A merger can be synergistic for the two companies, which can lead to accretive earnings going forward," said a source.
SKP, which has been on expansion mode over the past few years, is in the business of manufacturing plastic parts and components, contract manufacturing, precision mould making, the sub-assembly of electronic and electrical equipment and other secondary processes.
For the financial year ended March 31, 2013 (FY13), British electrical appliance brand Dyson contributed 55% to SKP's total sales.
According to SKP's website, its other clients include Hewlett-Packard, Sharp, Flextronics and Pioneer.
Tecnic, meanwhile, is involved in plastic moulding design and fabrication, plastic injection and blow moulding for the automotive, electrical and electronic sectors as well as industrial consumable products. It counts Valeo, Sharp, Panasonic, Denso, Suzuki, Proton and Perodua as its clients.
SKP and Tecnic had cash and cash equivalents of RM19.4mil and RM25.7mil, respectively, as at June 30. However, SKP has seen a higher trading volume in recent months, while Tecnic is a relatively tightly held stock.
In an earlier note, RHB Research said SKP could achieve a two-year earnings compounded annual growth rate of 57.9% on the back of a 75% expansion in capacity to cater to increasing orders from Dyson.
SKP has a new plant in Senai, Johor, which is slated for completion next month and achieve full-scale operations by FY17, Kenanga Research said in a separate report.
The research house noted that SKP's stronger order-book, underpinned by orders from Dyson to manufacture two new product lines for vacuum cleaners and fans, will provide earnings visibility for the next few years.
"The new products are next-generation appliances that will be able to fetch higher margins and contribute to the group's earnings. We understand that a major part of the group's new plant will cater to the production of the two new products," it added.
SKP jumped 10.5 sen to 71 sen, with 38.37 million shares being traded.
Tecnic rose 31 sen, or 6.5%, to RM5.08, with 219,500 shares changing hands.
Strategic Plan You should consider whether or not you are looking for a long term relationship. You need to locate a good cultural and strategic fit. Do your due diligence and take your time in uncovering a manufacturers professional reputation in that industry. During your research, don't just look at the positive reviews to determine how good they are, look for the red flags and see how bad things can get.
The Process Type Different manufacturers use different manufacturing processes that include extrusion, co-extrusion, tri-extrusion as well as crosshead extrusion coatings.
The Plastic Materials The plastic extrusion materials are used in different applications and each of them has their unique properties. One of the most important aspects of hiring a manufacturer is considering the extrusion materials they use for the custom parts. You have to be sure that the parts will be manufactured successfully and will perform as properly as is expected. In case you are not sure about the kind of plastic extrusion materials that would be best for your parts, an engineer can assist you in that area. There are also numerous grade types for the extrudable materials so you should choose a company that can produce the grade you need.
Capabilities If you have a significant production volume requirement, it is essential to know the production capabilities of the manufacturer. The manufacturer should also be able to provide you with extensive capabilities in terms of the design, tooling and fabrication. With these plastic extrusion capabilities, a manufacturer is able to produce high quality custom parts that meet the requirements of their customers. The finishes should be considered as well as they could be matt, glossy or textured. That means your custom plastic parts manufacturer should know about the latest finishes in the market.
Tooling Custom plastic extrusion needs tooling, which is a lot cheaper compared to injection molding. A quality extrusion manufactures ought to offer you state of the art tooling capabilities. They should have an experienced team that designs, engineers and tests all tooling. This will improve productivity, efficiency, safety and reduce costs.
Customer Service When working with any manufacturer, the process will become easier if they have working customer services that communicate effectively. A great manufacturing company is determined by the quality of customer services they offer. If for instance you have any last minute requests or want to change your order, you need to know that someone will be there to attend to you and support you. This will be more important if you are looking for a long term relationship. For it to be successful custom plastic parts manufacturer there needs to be helpful and pleasant customer service.
Conclusion You must consider these things when you are looking for the right manufacturer. As long as you evaluate their previous work and ensure they can provide you with all your requirements at a reasonable price, you will find a good company to work with.